MARLEY Stir It Up Turntable User Manual

MARLEY Stir It Up Turntable

PRODUCT MAP

LEGEND

1. Spindle
2. Turntable
3. Balance Weight
4. Anti-Skating Knob
5. Tone Arm Lift Level
6. Tone Arm Rest Holder
7. Tone Arm
8. Stylus
9. Needle Cover
10. Multi-Function Button
11. Power Adaptor With 4 Interchangeable Plugs
12. 45 Adaptor

LEGEND

1. A. RCA Line Out
2. B. Pre-Amp Switch Button
3. C. USB-C Out
4. D. Off/33/45 Knob
5. E. Headphone Jack
6. F. Bluetoot ho Button
7. G. – VOL + Knob
8. H. Anti-skating Knob

SETUP

POWERING ON YOUR STIR IT UP LUX

• Your Stir It Up Lux uses an AC power supply and is powered by a standard wall outlet.
• Connect the power adaptor to the wall outlet.

ATTACHING THE DRIVE BELT

Note : The drive belt comes pre-installed. However, if when you open the turntable, there is no visible beltt a round the sub-platter and motor. Please re-fit the belt.

• To fit the belt, put the belt on the notor (this is the gold spindle), then keeping the belt tight stretch it around the sub-plat ter. Once in place nake sure the belt if flat and not twisted.
• Now place the glass platter on the black sub-platter, by aligning the centre holes.
• Now place the slip mat on the glass platter, again aligning the cent re holes. The platter should be attach ed to the base.

BLUETOOTH° PAIRING

• Power on the external Bluet oot ho device first before turning on the B function on the urntable.
• Press the B button on the turntable (MFB) to enable the unit to search the Bluetoot ho device till BT indicator light becomes solid. This will indicated your devices are paired.

NOTE : If the TuTntable does not pair with your Bluetoot h® device within 30 seconds, press the Bluetoot h® search button again on the turntable and it should paiT

• Blue LED light flash
• Blue LED light stable

DISCONNECT BLUETOOTH PAIRING
Long press and hold the BT button till the BT indicator light turns off. Turntable will then disconnect from external device.

BIue LED Iight will turn to Red. This indicates BLuetooth 1s oft, but turntbale still nas power.

PLAYING A RECORD

1. Put a vinyl record on the turntable.
2. Assemble the balance weight and set it to a proper position.
3. To adjust the balance weight rotate the balance we1ght at counter-clock Wise.
4. Lift and move the tone arn to turntable. Place the tone ar on the edge of the record.
5. Turn the RPM Dial knob to select the speed according to the record you are playing.
6. The turntable platter will auto-stop when the music has ended. Lift the tone arm and place it to tone arm rest manually.

To listen to side B, flip record and repeat the above steps.

• 33 RPM speed to play corresponding size 33 vinyl disc
• 45 RPM speed to play corresponding size 45 vinyl disc

To power the unit off Rotate the RPM Dial knob to the off position.

Note:
Renove the needle cover before you balance the tone arn. Hold tone arn whenever you nake any adjustnent or action so as to protect the tone arn. Do not try to adjust the balance weight while playing a record as this could break the needle and scratch the record. Re-secured the tone arn before transportation to protect the needle. Renove the balance weight before transportation to PTevent dana ge or breakage to the unit. Do not stop or turn the Platter manually. Moving or jarring the turntable without securing the Tone arn clamp cOuld result in damage to the Tone arn

ANTI-SKATING

Nomally the anti-skating should be set to its minimum setting. Anti-skate compensates for inward tracking forces that occur with certain pick-up when the stylus nears the center of the record. If the turntable is experiencing excessive skipping while nearing the center spindle, try increase the anti- skating in the increnents indicated on the dial. Start by adding an increment of 1, test its performance, then increase it more, and so on.

Note : During adjusting the anti-s kating kn ob, leave the tone arn and balance weight alone to prevent damaging the stylus (needle).

VOLUME CONTROL

• Increase Volume : Rotate the Volume Knob clockwise.
• Decrease Volume : Rotate Vol une Knob counter clockwise.

HEADPHONE OPERATION VIA HEADPHONE JACK
Connect a set of headp hone (not included) in the headphone jack.

Note : Never put on the headphon e till you have plugged in the headphone plug LED will also be solid RED when headphones are plugged in.

NON BLUETOTH° CONNECTION SETUP

CAUTION : Switch off the power to all equipnent before Making Connections. Read the instructions of each cOm ponent you intend to use with this unit. Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnect ion ca bles toget her with the AC poweT cOrd.

LINE OUT OPERATION

1. Switch the PRE-AMP OFF/0N SWITCH to ON pos it ion .
2. Plug one end of the RCA cable (included) into the LINE OUT SOCket at the back of the unit. Be sure to match the color w1th the sOcket.
3. Plug the other end of the cable into the LINE IN SOcket of your home amplifier device.
4. Switch on the unit and the amplifier device you connected.
5. Adjust the volume on the amplifier device.

COMPLIANCE INFO

STIRIT UP LUX
READALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmtul interterence in a residential installation. This equipment generates uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause hamfu interference to radio com munications. However, there is no guarantee that interference will not Occur in a particular installation. f this equi pment does cause harmtul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more to the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Conect the equipment ito an outlet on a cirouit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Hules. Operation is subject to the following two conditi ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, induding interference that may cause udesired operation.

FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-ocated or operating in conjunction with ary other atenna or transmitter

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To Maintain compliance with the FCC’S HF exposure guidelines, place the product at least 20cm from nearby persons.

ISEDC STATEMENT
This device complies with nnovation, Science, and Economic Development Canada license-exempt RSS standard(s) Operation is subject to the following two conditions: (1) this device may not cause interterence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device complies with AF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

ISEDC RF EXPOSURE STATEMENT:
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

WEEE EXPLANATION
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resour ces Hereby, FKA Brands Ltd, declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53 EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.ukideclaration-of- conformity

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>