niko 353-650021 Presence Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
Manual
Presence detector
353-650021
4 Year
warranty
Presence detector P46MR, DALI-2, secondary and BMS, 12-13 m, 360°, for flush- mounting box
Wiring
**** 230 V/DALI power – OFF
Secondary
Dimensions
Installation
230 V/DALI power – OFF
Installatie
| 
---|---
App settings
230 V/DALI power – ON
| Sensitivity
---|---
Factory Settings| High
Settings by BMS software
Table memory bank 2
| Address | Description | Default value | Memory type |
|---|---|---|---|
| 0x00 | Address and last accessible memory location | 0x03 | ROM |
| 0x01 | Indicator byte (manufacture definable) | 0x00 | any |
| 0x02 | 60 mm |
Memory bank lock byte (◇0x55 = Read Only else
Read/ Write)| 0xFF| RAM
0x03| 79 mm
PIR sensitivity segment A (MR, LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x04| PIR sensitivity segment B (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x05| PIR sensitivity segment C (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF| 0x03| NVM
0x06| LUX range
0 = NORMAL 0 – 1023 lux, 10-bit
1 = HIGH 0 – 10360 lux, 14 bit| | NVM
LED behavior
****230 V/DALI power – ON
Green LED continuously on| | Connection OK|
---|---|---|---
Green LED flashing| | Warming up| Wait
Red LED continuously on| | Error| More info –>
Blue LED flashing| | Walk test active
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring scheme |
| Load does not turn off | The detector receives false triggers | Check for any |
objects that may cause false triggering and remove them from the detection
range or lower the sensitivity
App cannot connect to
the detector| Bluetooth® has been disabled on your mobile device| Enable
Bluetooth® on your mobile device
Specifications
| Article number | 353-650021 |
|---|---|
| Configuration | DALI-2 secondary/BMS |
| Input voltage | via the DALI bus |
| Maximum current consumption | 28.1 mA |
| Nominal current consumption (12 V, 25°C) | 8.1 mA |
| Maximum startup time DALI | < 1200 ms |
| Maximum PIR detection startup time | 70 s |
| Light intensity range | 0 – 10360 lux (see DALI BMS settings) |
| Detection angle | 360° |
| Detection range (PIR) | ø 12 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | flush-mounting box |
| Mounting height | 2 – 3.5 m |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 9.5 mm |
| Dimensions (HxWxD) | 100 x 100 x 44.5 mm |
| Wire capacity | 1.5/2.5 mm² |
| Protection degree | IP20 |
| Impact resistance | IK02 |
| Modification of settings | app (iOS/Android) and 2-way Bluetooth® |
communication/BMS software
Maximum range Bluetooth® (free field, depending on the device)| 50 m
Operating frequency| 2.4 GHz
Maximum radio frequency power| -2 dBm
Halogen-free| yes
Marking| CE
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as
complete, correct and up to date as possible. Nevertheless, some deficiencies
may subsist. Niko
cannot be held responsible for this, other than within the legal limits.
Please inform us of any deficiencies in the manuals by contacting Niko
customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>