NEUMANN LH 66 Tripod Adaptor Plate Instruction Manual
- June 9, 2024
- Neumann
Table of Contents
NEUMANN LH 66 Tripod Adaptor Plate
Package contents
- A: 1 × bracket for height adjustment
- B: 1 × bracket for inclination adjustment
- C: 1 × base plate
- D: 1 × tube
- E: 2 × plastic washers
- F: 2 × metal washers
- G: 6 × M6×12 screws
- H: 2 × M8×12 screws
- I: 5 × self-adhesive feet
- J: 1 × M8×20 countersunk screw
- K: 1 × height bracket locking clamp
- L: 1 × cover cap
- M: 1 × 4 mm Allen key
- N: 1 × 5 mm Allen key
INSTALLATION INSTRUCTIONS
Important safety and mounting instructions
- ead and follow the safety and mounting instructions, keep these instructions easily accessible and always include them when passing the LH 66 on to third parties.
- Also read and follow the installation instructions contained in the operating manual of the mounted studio monitor.
- When mounting, follow the local, national and international regulations and standards.
Intended use
The LH 66 is a table stand for decoupling KH 120 and KH 150 studio monitors from the installation surface and for optimum orientation. The LH 66 is only suitable for the above-mentioned Neumann 2-way studio monitors and must only be used in dry and clean interiors such as studios. The LH 66 must not be used for other purposes or in other environments. In case of any damage or any deviation from the safety and mounting instructions, immediately dismount the studio monitor from the LH 66.
Required qualifications
Have the studio monitor mounted to the LH 66 by a specialist. Due to his/her technical training, know-how and experience as well as knowledge of relevant provisions, regulations and standards, the specialist must be able to assess assigned tasks, recognize potential hazards and ensure appropriate safety measures.
Safety instructions for mounting
- Only mount one Neumann 2-way studio monitor to the LH 66 and proceed as described in this mounting manual.
- Always use the enclosed original accessories.
- Check every 3 months if all screws are properly tightened and if the LH 66, the studio monitor and the surface on which the LH 66 is placed are in proper condition.
Safety instructions for installation
- Do not install the LH 66 in locations where it is exposed to externally generated vibrations.
- Place the LH 66 with the mounted studio monitor on a horizontal and slip-resistant surface that can carry at least the weight of the LH 66 with the mounted monitor. Make sure that the LH 66 with the mounted monitor cannot tip over or drop down, even if the power or audio cables are pulled.
- Do not place the LH 66 on delicate surfaces, as these might get stained when they come into contact with the self-adhesive feet.
Specifications
- Weight without packaging: 3.8 kg
- Dimensions (assembled): 508 × 255 × 313 mm (H × W × D)
- Max. load: 10 kg
Guarantee
- For the current terms and conditions of the product guarantee please visit www.neumann.com.
georg neumann gmbh
- Leipziger Str. 112 · 10117 berlin · Germany
- tel: +49 (0)30 / 41 77 24-0
- fax: -50
- headoffice@neumann.com
- www.neumann.com
06/22 · 592894/A01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>