kobi LED VESPA PRO 40W-60W-100W-150W-200W LED Street Lamp Instruction Manual
- June 9, 2024
- KOBI
Table of Contents
kobi LED VESPA PRO 40W-60W-100W-150W-200W LED Street Lamp
DIMENSION
INSTALLATION
H x L x W – 40W: 520 x 160,1 x 99 mm
60W: 557,8 x 179,1 x 99 mm
100W: 612,2 x 221 x 99 mm
150W: 664,6 x 247,1 x 99 mm
200W: 767,1 x 300 x 99 mm
Product: LED VESPA PRO
Parameters: ~ 230 V, 50Hz, 40W / 60W / 100W / 150W / 200W
ATTENTION
- The luminaire should be used in accordance with its purpose- without causing any life-threatening or health-threatening situations.
- Devices with visible damage to the enclosure or the power supply line must not bein stalled.
- During installation, disconnect the power supply and follow Occupational Safety and Health regulations.
- A properly installed device may only be connected to a properly operating electrical installa- tion.
- The electrical connection must be performed by a specialist holding an ap propriateauthorisa -tion for electrical works
- If installed and operated properly, the device is highly resistant to water and dust.
- The device may be installed directly on the normally flammable surface (i.e. ignition tempera-ture of the surface at least 200ºC, does not deform and soften at this temperature, e.g. wood and wood-derivatives, thickness above 2 mm) or on a non-flammable surface (i.e. not sup-porting fire, e.g. metal, gypsum, concrete).
- Light source of this fixture is unchangeable. When light source is used up, please replace whole lighting fixture.
- We reserve the right to introduce technical modifications.
- Keep the instruction manual.
blue – N; brown – L; yellow-green –
The terminal block is not supplied. Installation must be performed by a qualified person. The terminal block must be selected taking IP class of the fixture and the cross-section of the connection wires
In accordance
to European Directive 2012/19/EU regarding electrical and electronic
equipment, the WEEE label indicates the need of separate collection of used
out electrical and electronic equipment. Products with such label, under
penalty of fine, can not be thrown into ordinary garbage together with other
wastes. These products may be harmful to the natural environment and human
health, it requires a special form of treatment / recovery / recycling /
disposal. You can find out about the utilization possibilities of a worn out
device in the appropriate city or commune office
