CAMBRIDGE AUDIO SX-120 70W Subwoofer Installation Guide
- June 9, 2024
- Cambridge Audio
Table of Contents
CAMBRIDGE AUDIO SX-120 70W Subwoofer Installation Guide
Technical specifications
Sensitivity : 180mV for full power output
Rated output power : 70W
Frequency response : 50 – 150Hz
Drive units : 1 x 8” long-throw woofer
Crossover : 50 – 150Hz continuous/active
Max. power consumption : 100W
Magnetic shielding : NA
Dimensions (W x D x H) : 11.8 x 12.2 x 11.8” (300 x 310 x 300mm)
Weight : 7.7kg
Introduction
Thank you for purchasing this Cambridge Audio SX-120 subwoofer. Installed and used properly the subwoofer will deliver astonishing sound quality, whether playing music or movies, whatever the listening environment. Please read this guide carefully, as it contains essential information in getting the very best from your subwoofer.
Read all instructions
Avoid damp
Avoid solvent-based cleaners
Avoid extreme temperatures
Avoid direct sunlight
Secure all cables
Unpacking
Follow the diagrams to unpack your subwoofer:
Positioning
Your subwoofer can be placed almost anywhere in the room as bass sound is
largely non-directional.
Fix feet to cabinet using supplied screws.
Connections
If using an AV receiver, connect sub-out to the Sub Input socket.
If using with a 2-channel hi-fi system, connect pre-out
Controls
-
Set Phase for best system sound (0 = normal).
-
Mains power on /auto/ off
-
AUTO: After inactivity of 30 minutes, the product will automatically switch to Standby
-
Adjust Frequency to integrate subwoofer with your system
-
Set Volume to balance subwoofer output with your system
-
AC power socket.
-
For continued protection against fire hazard, replace only with specified fuse:
100V – 240V AC ~ 60/50Hz = T2AL 250V
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>