TP-Link Archer C80 Wireless Router Quick Installation Guide

TP-Link Archer C80 Wireless Router

Connect the Hardware

• If your internet comes from an Ethernet outlet, connect the router’s WAN port to it, then follow Steps 4 and Step 5.
• If you want to configure this new router as an access point to extend your network, refer to the Access Point Mode section on the back page.

Set Up the Network

Method 1: Via TP-Link Tether App

1. Download the Tether app.

2. Open the Tether app and log in with your TP-Link ID.
   Note: If you don’t have an account, click Sign Up to create one first.

3. Tap the + button in the Tether app and select Router > Wireless Router. Follow the steps to complete the setup and connect to the internet.

Method 2: Via a Web Browser

1. Connect your device to the router (wired or wireless).

   • Wired
     Turn off the Wi-Fi on your computer and connect to the router using an Ethernet cable.

   • Wireless
     a. Find the SSID and wireless password printed on the label of the router.
     b. Click the network icon of your computer or go to the Wi-Fi settings of your smart device, and then select the SSID to join the network.

2. Connect the router to the internet.

   • a. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.
     Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide.

   • b. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.

Access Point Mode

If you already have a router, you can switch this new router to an access point to extend your existing network.

Follow the steps below:

1. Power on the router.

2. Connect the router’s WAN port to your existing router’s Ethernet port via an Ethernet cable as shown above.

3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password printed on the label at the bottom of the router.

4. Launch a web browser, and enter http://tplinkwifi.net in the address bar. Create a password to log in.

5. Run the Quick Setup, click Change Mode in the top right corner then select Access Point Mode.
   Note: You can also go to Advanced > Operation Mode to switch to Access Point Mode.

6. Wait for the router to reboot, then log in and follow the Login/Reset Instructions to complete the setup.

Need Help?

Q1. What should I do if I cannot access the web management page?

• Reboot your router and try again.
• If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
• Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser and press Enter.
• Use another web browser and try again.
• Disable and enable the network adapter being used.

Q2. What should I do if I cannot access the internet?

• Reboot your modem and router, then try again.
• Check if the internet is working normally by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your internet service provider.
• Log in to the web management page of the router, and go to the Network Map to check whether the internet IP address is valid or not. If it is not, check the hardware connection or contact your internet service provider.
• For cable modem users, log in to the web management page of the router. Go to Advanced > Network > Internet > MAC Clone, select Clone Current Device MAC, and click Save. Then reboot both the modem and the router.

Q3. How do I restore the router to its factory default settings?

• With the router powered on, use a pin to press and hold the RESET button on the back until all LEDs turn off.
• Log in to the web management page of the router, go to Advanced > System > Backup & Restore > Factory Default Restore, and click Factory Restore. The router will restore and reboot automatically.

Q4. What should I do if I forget my web management page password?

• If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it.
• Alternatively, refer to Q3 to reset your router, then visit http://tplinkwifi.net to create a new login password.

Q5. What should I do if I forget my wireless network password?

• If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
• Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at http://tplinkwifi.net, and go to Wireless > Wireless Settings to retrieve or reset your wireless password.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use a damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use devices where wireless devices are not allowed.
• The adapter shall be installed near the equipment and shall be easily accessible.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/ce/.

Support

For technical support , replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.

If you have any suggestions or needs for our product guides, you are welcome to email techwriter@tp-link.com.cn.

FAQ’s

The Archer C80 supports how many devices at once?

The Archer C80 may theoretically connect 128 devices at once, although the performance of each device varies depending on the applications and external factors.

The TP-Link Archer C80’s speed.

With total speeds of up to 1900 Mbps, the cost-effective Archer C80 offers high-performance WiFi. Send emails, browse the internet, and do more bandwidth-intensive applications like online gaming or 4K/8K UHD streaming on the 5 GHz bands, all without experiencing lag.

A TP-Link router has a capacity of how many devices.

The majority of wireless routers and access points claim to be able to support up to 250 simultaneous connections.

Is Archer C80 a router for modems?

Modem and router, TP-LINK Archer C80 LDLC using TP-LINK.

OneMesh is there on the Archer C80?

The OneMesh feature of the Archer C80 eliminates dropouts and lag when switching between signals and creates seamless whole-home coverage.

Can you use the Archer C80 as a repeater?

The Archer C80 can only be set up as a wireless router or access point; it cannot be set up as a repeater or extension.

What setting is ideal for a TP-Link router?

Bridge Mode is the best option for small restaurants, bars, homes, offices, and other places where an Internet connection must be given to visitors without disclosing the password of the existing network to hosts.

What is the lifespan of a TP-Link router?

Many experts advise that you can probably get away with changing your router every five years if you don’t utilize that many smart gadgets in your home.

How many people can use a router at once?

On your Wi-Fi network, the majority of wireless devices can typically connect to up to 255 devices at once.

With my Archer C80, how can I port forward?

Next click on Advanced > NAT Forwarding > Port Triggering. 3. Choose the required application and then click SEE COMMON SERVICES. The External Port, Triggering Port, and Triggering Protocol will all be filled in automatically.

What is TP-standard Link’s password?

The default login username and password are both admins, and the default IP address is 192.168.0.1 (or http://tplinkwifi.net) (all lowercase).

What is the TP-Link Wi-speed?

The highest wireless link speed is 150 Mbps/300 Mbps, as we said earlier. The router’s LAN port capacity, the characteristics of Ethernet cables, and the computer’s Ethernet Adapter all influence how quickly a wired local network link may be established.

Which channel works best for TP-Link?

Channels 1, 6, and 11 are typically the best for 2.4GHz, but any channel can be used.

What benefits does the TP-Link router offer?

TP-Link 4G routers can effortlessly share a 3G/4G connection with numerous wireless devices, such as phones, tablets, and laptops, at the same time, and provide internet for connected devices, including desktop computers, thanks to WiFi and LTE antennae and Ethernet connections.

Are TP-Link routers water-resistant?

Outdoor Single-Band Wireless N Access Point, TP-Link Omada N300 300Mbps Wi-Fi, Passive PoE, Free Management Software (EAP110-Outdoor), Waterproof, Dustproof, Lightning Protection.

Download this PDF Link:TP-Link Archer C80 Wireless Router Quick Installation Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>