HYPER BICYCLES INC TGTHTT1100-R 2024 Trophy Truck Owner’s Manual

HYPER BICYCLES INC TGTHTT1100-R 2024 Trophy Truck

Product Specifications

• Compliance: Industry Canada license-exempt RSS 210 standard
• Power Source: Rechargeable 6.4V 320mAh lithium battery
• Manufacturing Location: China
• Features: All-terrain, full function

Product Usage Instructions

Battery Installation

1. Open the battery cover on the vehicle chassis.
2. Insert 2 X 1.5V AA batteries into the slots with correct polarity.
3. Close the battery cover securely.

Functions

• Turning Trim
• Turn Left / Turn Right
• Backward / Forward
• Fully proportional control for acceleration and steering.

Charging the Battery

1. Connect the USB charging cable to the vehicle’s charging port.
2. Connect the USB end to a power source like a USB plug or computer.
3. Charging time: approximately 90 minutes.
4. Charging Status: When charging, the Charging Light will flash; when fully charged, the light will turn off.

Troubleshooting
If the device is inactive for 5 minutes, it will enter Sleep Mode. To wake it up, simply turn left once.

Frequently Asked Questions (FAQ)

• Q: Can the rechargeable battery in the car be replaced?
  A: No, the rechargeable battery in the car cannot be replaced.

• Q: How can I charge the vehicle?
  A: Connect the USB charging cable to the vehicle’s charging port and then connect it to a power source like a USB plug or computer for approximately 90 minutes.

CONTENTS

BATTERY INSTALLATION

1. Open battery cover by hand.
2. Insert 2 X 1.5V AA batteries in the battery slots with correct polarity.
3. Close the battery cover.

Charging the Battery : 90 minutes

1. Connect USB charging cable to vehicle charging port.
2. Connect USB to any power output from USB plug / computer to charge the vehicle.

When charging, Charging Light will keep flashing; When Finished charging, Charging Light will turn off.

FUNCTIONS

TROUBLESHOOTING

WARNING
There are small parts nside possibly causing a choking hazard, so the product isn’t suitable for children 3 years old and below. When the product is being used, an adult must be on the scene for guardianship and guidance. These instructions have important information and thus shouldn’t be discarded randomly. They should be kept properly for future inquiry.

• DO NOT MIX ALKALINE, STANDARD (CARBON ZINC) OR RECHARGEABLE (NICKEL CADMIUM) BATTERIES
• DO NOT MIX OLD AND NEW BATTERIES.
• DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK.

WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years. PLEASE DO NOT RETURN TO STORE For more information please email Consumer Services: help@hypertoys.com COLORS AND DECORATIONS MAY VARY. KEEP CONTENT DETAILS FOR FUTURE REFERENCE.

This device complies with Industry Canada license-exempt RSS 210 standard. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Battery Safety Information

• Ensure that battery polarity is correct.
• Use only batteries of the type recommended (or equivalent).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Rechargeable batteries are to be recharged by Adult only. Remove used-up batteries immediately.
• Do not recharge non-rechargeable batteries.
• Do not short-circuit terminals.
• Dispose of batteries safely.
• Do not dispose of batteries (or products containing non-rechargeable batteries) in fire, as batteries may explode or leak.
• Rechargeable battery in the car can not be replaced.

Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with the Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help.

© Copyright 2024. Hyper Toys

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>