LG NanoCell 43NANO766QA Smart UHD TV Owner’s Manual

LG NanoCell 43NANO766QA Smart UHD TV

Before reading this manual

• Read this manual thoroughly before operating your TV, and keep it for future reference.
• On the website, you can download the manual including installation, use, troubleshooting, specifications, license, etc, and view its contents on your PC or mobile device.

User Guide: For more information about this TV, read the USER GUIDE embedded in the product. (Depending on the model)

• To open the USER GUIDE   →   → [Support] → [User Guide]

Separate Purchase

• Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
• The model name or design may be changed depending on the upgrade of product functions, the manufacturer’s circumstances, or policies.
• A cable to connect antennas and external devices must be purchased separately.

Note

• Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
• The items supplied with your product may vary depending on the model.
• The image shown may differ from your TV.

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
• NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• Do not place the TV and/or remote control in the following environments:

  • Keep the product away from direct sunlight.
  • An area with high humidity such as a bathroom.
  • Near any heat source such as stoves and other devices that produce heat.
  • Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.
  • An area exposed to rain or wind.
  • Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
  • Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
  • Do not install in excessively dusty places.
    Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction, or product deformation.

• Ventilation

  • Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.
  • Do not install the product on a carpet or cushion.
  • Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord.
  Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• Disconnecting the Device from the Main Power

  • The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling to the TV. Otherwise, the TV may fall over, which may cause serious injury.

• Outdoor Antenna Grounding  (Can differ by country):

  • If an outdoor antenna is installed, follow the precautions below.
    An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

• Grounding  (Except for devices that are not grounded.)

  • TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth’s ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.

• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact customer service.

• Do not touch the end of the power cord while it is plugged in.
  You may be electrocuted.

• If any of the following occur, unplug the product immediately and contact your local customer service.

  • The product has been damaged.
  • If water or another substance enters the product (like an AC adapter, power cord, or TV).
  • If you smell smoke or other odors coming from the TV.
  • When lightning storms or when unused for long periods of time.
    Even if the TV is turned off by remote control or button, the AC power source is connected to the unit if not unplugged in.

• Do not use high-voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.

• Use only authorized attachments/accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe the dust off.

Batteries

• Store the accessories (battery, etc.) in a safe location out of the reach of children.
• Do not short-circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
•   Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Moving

• When moving, make sure the product is turned off, and unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard, or injury.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
• Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to the screen.

Cleaning

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Installation

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV to the box or packing material that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and all cables.
• When holding the TV, the screen should face away from you to avoid damage.
• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the following illustration.
• When transporting the TV, do not expose the TV to jolts or excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt it towards the left or right.
• Do not apply excessive pressure to cause flexing/bending of the frame chassis as it may damage the screen.
• When handling the TV, be careful not to damage the protruding buttons.
• Avoid touching the screen at all times, as this may result in damage to the screen.
• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1.  Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
   • If there are bolts inserted at the eye-bolts position, remove the bolts first.

Securing the TV to the Wall

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
   • If there are bolts inserted at the eye-bolts position, remove the bolts first.
2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with a flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.
• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

• **** Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
• For more information on screws and wall mount brackets, refer to the Separate Purchase.
• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set use the wall mounting bracket (optional parts) and fix it carefully so as not to drop.
• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• Do not use a sharp object when you detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm. (Depending on the model)

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve the image quality.
• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with Ultra HD broadcasting, this TV cannot receive Ultra HD broadcasts directly. (Depending on the model)

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on the model)

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)
Power Off1) (Press and Hold)
Menu Control (Press2))
Menu Selection (Press and Hold3))

1. All running apps will close, and any recording in progress will stop. (Depending on the country)
2. You can access and adjust the menu by pressing the button when the TV is on.
3. You can use the function when you access the menu control.

Note

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning the on/off buttons, turning off the device, and unplugging the power cord.

Connections

Connect various external devices to the TV and switch input modes to select an external device. For more information on external device connection, refer to the manual provided with each device.

• When connecting the HDMI cable, the product, and external devices should be turned off and unplugged.
• Supported HDMI Audio format (Depending on model):  True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

Note

• If the device connected to Input Port also supports HDMI Deep Colour, your picture may be clearer.
  However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Colour] setting to off.

•  →   → [General] → [Devices] → [HDMI Settings] → [HDMI Deep Colour]

  • 8K: Support 8K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
  • 4K: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)
  • Off: Support 4K @ 50/60 Hz (4:2:0)

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI Cable Types

  • Ultra High-Speed HDMI®/™ cable (3 m or less)

USB
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

Note

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick, 18 mm wide, and 8 mm wire diameter. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. (Depending on the model)

IR Blaster
Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster. (Depending on the country)

Note

• Connect the IR Blaster cable to the TV’s IR Blaster port.
• Use universal control settings to control the device.
• Secure the IR Blaster with the 3M tape provided.

External Devices
Available external devices are Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

Note

• The external device connection may differ from the model.
• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the [Picture] menu until the picture is clear.
• In PC mode, some resolution settings may not work properly depending on the graphics card.
• If Ultra HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance. (Depending on the model)
• When connecting to a wired LAN, use a CAT 7 cable with high-speed Internet transmission. (Only when  LAN the port is provided.)

Specifications

(Depending on the country)

Broadcasting Specifications

Digital TV (Depending on the country)| Analogue TV (Depending on the country)
Television system| DVB-S/S2 DVB-T/T2 DVB-C| PAL/SECAM B/G, D/K, I SECAM L
Program coverage| DVB-S/S21)| DVB-C1)| DVB-T/T21)| 46 ~ 862 MHz
950 ~ 2,150 MHz| 46 ~ 890 MHz| VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz UHF V : 606 ~ 862 MHzS Band II : 230 ~ 300 MHz

S-Band III : 300 ~ 470 MHz

Maximum number of storable programs| 6,000| 3,000
External antenna impedance| 75 Ω
CI Module (W x H x D)| 100.0 mm x 55.0 mm x 5.0 mm

• Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced 8K images will vary depending on the source content.

Environment condition

Operating Temperature|  | 0 °C to 40 °C
Operating Humidity|  | Less than 80 %
Storage Temperature|  | -20 °C to 60 °C
Storage Humidity|  | Less than 85 %

• For information on the power supply and power consumption, refer to the label attached to the product.
• The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
  • On some models, the label is inside the external device connection terminal cover.
  • Depending on the model or country, the typical power consumption may not be on the label.

Product Information

Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices, and other relevant documents please visit https://opensource.lge.com. LG Electronics will also provide an open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product

Troubleshooting

Cannot control the TV with the remote control.|

• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote control.
• Check if the batteries are still working and properly installed (  to  ,  to  ).

---|---
No image display and no sound is produced.|

• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.|

• Check the power control settings. The power supply may be interrupted.
• Check if the auto-off function is activated on the settings related time.
• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.|

• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.

Abnormal Display|

• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/ or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and colour of the panel depending on your viewing position(left/right/ top/down).
  This phenomenon occurs due to the characteristic of the panel.
  It is not related with the product performance, and it is not malfunction.

• Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

Generated Sound|

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the
  guide panel. (Depending on the model)

• Make sure to wring any excess water or cleaner from the cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough water or cleaner onto a dry cloth to wipe the screen.

Using Magic Remote Control

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

How to register the Magic Remote Control
To use the Magic Remote, first, pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the  Wheel  (OK)  on the remote control.
   • If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the  ** (Back)  and  ** (Home)  buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Press and hold the (Home ) and ** (Q. Settings)**  buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed closer than 0.2 m, the Magic remote control may not perform as expected due to frequency interference.

Using Always Ready
(Depending upon the model)
You can operate the TV and connect to Bluetooth with direct voice recognition while the power is off.

•  →   → [General] → [Always Ready], setting [Enable the function] to on.
• Pressing the  button while watching TV switches the screen to [Always Ready] which is turned on, and pressing the button once more turns the screen to [Always Ready] which is turned off.
• Press the  (Home) button or the (Back) button to watch TV when the screen is in [Always Ready] and is turned on.
• Press the  Wheel (OK) button to display the wallpaper when the screen is in [Always Ready] that is turned off, and press ****the button to watch TV.

Note

1. Using Always Ready may increase energy consumption.
2. For more information about the feature, refer to the   →   →  [Support] → [User Guide] → [Troubleshooting] → [Learn More About Always Ready].

Connecting Smart Devices using NFC Tagging

NFC is a technology that uses Near Field Communication (13.56 MHz), allowing you to conveniently send and receive information without separate settings. By bringing a smart device near the NFC-enabled remote control, you can install the LG ThinQ app and connect the device to the TV.

1. Turn on NFC in the smart device’s settings. To use NFC with Android devices, set the NFC option to enable ‘read/write tags’ in the smart device’s settings. The NFC settings may vary depending on the device.
2. Bring the smart device near the    (NFC) on the remote control. The required distance for NFC tagging is about 1 cm.
3. Follow the instructions to install the LG ThinQ app on your smart device.
4. Retagging the smart device to the remote control allows you to conveniently access various features on the connected TV through the LG ThinQ app.

Note

• This feature is available for NFC-enabled smart devices only.
• This feature is only available if the remote control has an NFC logo.

Specifications

Specifications   (MR22GN, MR22GA)

Bluetooth

NFC*

Only MR22GN

| Frequency range

2,400 to 2,483.5 MHz

13.553 to 13.567 MHz

|  | Output Power (Max.)

7 dBm

-13.27 dBuA/m @ 10 m

Using Remote Control

Note:  To use the button, press and hold for more than 1 second.

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. (Some buttons and services may not be provided depending on models or regions.) (Depending on the model)

FAQ’s

Does the antenna connector for the DTT on other televisions work or do you need to use a different one?

The antenna socket is permanent.

How much energy do you consume every hour?

Google it or contact the manufacturer to find out! sleds.

Has it had a recording feature?

You can definitely record on a USB.

Does this television include the magic remote, or must it be purchased separately?

Bring the remote, of course.

I was curious about the width of the foot and whether the 43nano766qa model contains one like the one in the picture.

Just know that it’s a wonderful television for both TV channels and video games, with an unbelievable quality-price ratio, so don’t wait to buy it if you want to. I have the previous model, so I’m not sure how to respond to your question because mine has legs, but if something is that first buy it and then you will manage as mounting it, you will not regret the second of your purchase. Forget negative comments because these people have no idea. It’s a spectacular quality-price television, and it’s actually more expensive but it’s on sale. That much is true: assembly is incredibly simple.

Apps may be downloaded. is a slow?

They can be downloaded, but only from a few chosen ones. I doubt it will be possible if they are not included on that list. I’m not sure if it’s due to the data source or the TV software when it takes a little while for some actions to be responded to.

Has it got Bluetooth?

Absolutely, and it is a great fit for headphones.

Do the shortcuts on the remote control for the programs have the ability to be changed, replaced, or blocked in order to prevent access?

It contains a blocking system in the TV menu to limit access to content that isn’t appropriate for kids, such as some applications and programming. Although I haven’t tried it, I believe it works by key.

Does it have Bluetooth in the LCD?

Yes, and it sounds great with earphones.

The 50-inch LG TV has Bluetooth.

All the latest LG Smart TVs are Bluetooth-capable.

What sets LG TV apart?

LG has had a sharp rise in popularity in this range because of being one of the first firms to offer TVs with OLED displays. Also, they provide a wide range of LED Televisions, from premium models with Micro LED backlights to low-cost 4k TVs.

How long is the LG UHD durable?

An LED has an average lifespan of 40,000 to 60,000 hours or around 4.5 to 6.8 years when it is at its brightest or very close to it.

How is UHD helpful?

In conclusion, Ultra HD Blu-ray discs can store up to 100GB more data than standard Blu-ray discs, which is sufficient to save 4K video without the requirement for streaming services that compress the data.

Is 4K UHD still good?

Although 4K video is more widely available, it has a long way to go before it replaces 1080p as the industry standard. But as long as you have the required internet connection to use 4K technology, there is no reason to avoid 4K TVs. Despite this, paying more won’t be worthwhile until there is more than 4K content available.

Is UHD TV acceptable?

While both offer an excellent resolution, the average viewer won’t notice much of a difference between buying a 4K or UHD TV. If, however, you place a premium on visual clarity, go for a 4K device that displays at 4,096 x 2,160.

Download this PDF Link:LG NanoCell 43NANO766QA Smart UHD TV Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>