CIDOO ABM641 60 Percent Aluminum Electrophoretic Dual Mode Mechanical Keyboard User Manual

June 9, 2024
CIDOO

CIDOO ABM641 60 Percent Aluminum Electrophoretic Dual Mode Mechanical

Keyboard

CIDOO-ABM641-60-Percent-Aluminum-Electrophoretic-Dual-Mode-Mechanical-
Keyboard-product

Product Features

  1. Aluminum with electrophoretic finish,
  2. Fully modular &hot swap: compatible with 3- pin and 5- pin switch,
  3. Custom-made stabilizer provides a unique typing sound profile.
  4. Strong and flexible fiberglass resists deformation.
  5. Double EVA insulation layer.
  6. USB Cable: Utilizes USB-C removable cable.
  7. Switch Type: Gateron G PRO Yellow Switch
  8. Keycap: PBT Dye sublimation keycap
  9. Bluetooth 5.0/USB -C dual mode
  10. Static and animated RGB lighting effects
  11. Come with powerful musical rhythm software.
  12. 2000 mA Rechargeable lithium battery.
  13. Product dimensions: 296.7*114.2:42.5 t0.5mm
  14. Product weight: 11889+109
  15. Product color Yellow ,White
  16. Current /Voltage: 5V 300mA
  17. Executive Standard: GB/T14081-2010
  18. Package includes: ABM641, Cable, User manual, Keycap and switch tool .

Toggle wired /Bluetooth mode: FN+R
CAPS, CTRL, WIN’ total 3 keys backlight will flash white 3 times when pressing FN-R

Bluetooth® Pairing Instructions

  1. Set switch on the back of the keyboard to the” ON” position, To make sure the keyboard is under Bluetooth mode,
  2. Press and hold the FN and Q/W/E keys for 5 seconds, The “R” key LED will begin to flash repeatedly to indicate that the keyboard is ready to connect to a new device over Bluetooth. Open the Bluetooth settings on your device and scan for available devices, Locate and select the ” CIDOO ABM641 ” entry.
  3. Once the keyboard has connected to your device, the “R” key will cease flashing, indicating that Bluetooth pairing was successful,
  4. The keyboard can support Bluetooth connections for up to 3 devices. Long press FN and Q/ W/E to set up a connection to a new device. Short press to connect to a previously paired device,

Auto sleep mode
After 5 minutes without a keypress the backlighting will turn off to conserve battery. After 30 minutes, the keyboard will enter standby mode and disconnect from Bluetooth. Any keypress will reconnect the keyboard,

Battery Charging

FN key will blink repeatedly when the keyboard is low on battery.

Custom Backlighting Mode Instructions:

  1. Press FN+Z/X/C (Each key can store a custom backlight mode).
  2. Press FN+ Tab – (The CapsLK ,Ctrl, Win key LED will flash white repeatedly to indicate recording).
  3. Press the keys that you wish to set the backlighting for.
  4. Press FN+ Tab to save exit the custom backlighting mode

FN combination keys

CIDOO-ABM641-60-Percent-Aluminum-Electrophoretic-
Dual-Mode-Mechanical-Keyboard-fig 2

(FN+left Ctrl to switch function mode, “trl” key led will change to white color after pressing FN+ left Ctrl)CIDOO-ABM641-60-Percent-Aluminum-
Electrophoretic-Dual-Mode-Mechanical-Keyboard-fig 3

(FN+E CtrlCIDOO-ABM641-60-Percent-Aluminum-Electrophoretic-Dual-Mode-
Mechanical-Keyboard-fig 1

For software download, pls visit website :www.cibo00.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals