V-TAC VT-5009 Smart Wi-Fi Controller Dimmera Instruction Manual

V-TAC VT-5009 Smart Wi-Fi Controller Dimmera

TECHNICAL DATA

Specific Uses

| Suitable for RGB or Single-color LED strip lights

Product Function

| Download the free App “Magic Home Pro” on phone and connect the controller to the App
Input Voltage| DC:12V-24V
Output Current| 5 Channel 4A/Channel
Output Power| 240W MAX
Operation Temperature| -10°C to +55°C
App Operating Distance| 30M without any barrier
Dimension| L105.5W45*H23mm

MULTI-LANGUAGE MANUAL – QR CODE

Please scan the QR code to access the manual in multiple languages.

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC SMART LED lighting. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

NOTE

1. Please make sure to turn off the power before starng the installation.
2.  Installation must be performed by a cerfied person.
3. Indoor use only [IP20]
4. This device requires Wi-Fi Frequency 2.4Ghz
5. Operating frequency (maximum transmitted power) 2400MHz -2483.5MHz (20dBm)
   This marking indicates that this product should not be disposed of with other household wastes.

WIRING DIAGRAM

INSTALLATION

• Step 1: Scan the given QR code, or download “Magic Home Pro” from the App Store (iOS) or the Google Play Store (Android).

Or

• Step 1: Search for “Magic Home Pro” app on the App Store (iOS) or the Google Play Store (Android).
• Step 2: App connection
  a) Wi-Fi mode: This mode needs register and login after completing 1 to 1 Mode.
  (Please refer to connection mode c ) Make sure the controller has been powered and never been set, please operate as below steps.

1. Click “+” in the upper right corner and click “add device”

2. Account registration and login

3. Connect the device to the router

  * b) App via Internet:  

Here you can locate the Wi-Fi controller via the internet from anywhere in the world. In Wi-Fi mode (connect mode(a)). Keep the Wi-Fi router online, no maer where you are , you still can control your lights with APP as long as there’s Wi-Fi/3G/4G internet for your smartphone.

  * 1 to 1 Mode: Open mobile Wi-Fi network signal, find  

“LEDnet**”signal and connect, then open Magic Home Pro APP.

If the network connect successfully you can enter the APP for operation.

Other Features

ALEXA SETTINGS

• Step 1: Creang your Magic Home Pro cloud account
  In order to control your smart light with the Amazon Echo, you need to create a Magic Home Pro cloud account and signed in

• Step 2: Add your light and modify the name
  Make sure there is at least one smart light in device list. On “Home” page, long press the light to rename.

• Step 3: Enable Alexa Skill
  The next step is to download the Amazon Alexa app , open the Amazon Alexa app and under the skills section, search for the“ Magic Home” skill. The account and password must be same as you created in Magic Home Pro APP.

• Step 4: Login and Discover Devices
  Use your Magic Home cloud account you created in step 1 to sign in to “Magic Home” Skill.
  The next step is to discover your smart lights from Alexa app. You can say“ Alexa, discover devices”. Once Alexa has completed discovering your smart lights, they will be shown in the Smart Home section in Alexa app.

• Step 5: Control your light
  At this point, you’re all setup. You can now control your lights by issuing voice commands.

ALEXA Commands

Now, you can control your smart device using voice commands on Alexa.
Below are a few commands you can use:

• Alexa, set [light name] to [0-100%].
• Alexa, turn [light name] on/off.
• Alexa, dim/brighten [light name].
• Alexa, increase/decrease [light name].
• Alexa, set the [light name] light to red.
• Alexa, change the [light name] to the color blue
• Alexa, make the [light name] warm white.
• Alexa, change the [light name] to the white.
• Alexa, set the [light name] to daylight.

Changing colors on your lights
Color Options for Alexa control of your smart device:

• Blue
• Crimson
• Cyan
• Fuchsia
• Gold
• Green
• Lavender
• Lime
• Magenta
• Orange
• Purple
• Red
• Salmon
• Sky Blue
•  Teal
• Turquoise
• Violet
• Yellow.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION

1. Magic Home Pro App & Amazon Alexa App
2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
3. Smart Device
4. Stable Wifi network

GOOGLE HOME SETTINGS

• Step 1: Creating your Magic Home Pro cloud account
  In order to control your smart light with the Google Home, you need to create a Magic Home Pro cloud account and signed in

• Step 2: Add your light and modify the name
  Make sure there is at least one smart light in device list. On “Home” page, long press the light to rename.

• Step 3: Add Home Control Action
  Add device in Home Control of the Home a pp. Select “Magic Home WiFi”.

• Step 4: Login with your app account
  Enter your app account and password to finish the account linking. (using your Magic Home cloud account, you used in step 1). Your device should be listed in Home Control device list now.

• Step 5: Control your light
  At this point, you’re all setup. You can now control your lights by issuing voice commands.

Google Commands:

Now, you can control your smart device using voice commands on Google Home. Below are a few commands you can use:

Say “Ok Google” or “Hey Google”, then.

• Turn on
• Dim
• Brighten
• Set to [50%]
• Dim/Brighten by [50%]
• Turn [color]
• Turn on/off all the lights
• Is on?

Changing colors on your lights
Color Options for Google Home control of your smart device:

• Blue
• Crimson
• Cyan
• Fuchsia
• Gold
• Green
• Lavender
• Lime
• Magenta
• Orange
• Purple
• Red
• Salmon
• Sky Blue
• Teal
• Turquoise
• Violet
• Yellow.

THINGS TO REMEMBER BEFORE STARTING INSTALLATION

1. Magic Home Pro App & Google Home App
2. Make sure you have Google Home Device
3. Smart Device
4. Stable Wifi network

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEA SE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>