MECHKEYS V98PRO Three Way Switch Keyboard User Manual
- June 9, 2024
- MECHKEYS
Table of Contents
V98PRO Three Way Switch Keyboard
User Manual
Quick Start
-
The three-way switch in the upper left corner means 2.4G wireless mode, wired mode and Bluetooth mode.
-
2.4G wireless mode: Take out the receiver on the right side, insert it into the device, switch to 2.4G mode, and you can use it.
-
Wired mode: Universal plug and play.
-
Bluetooth mode:
a) Pairing: Switch to Bluetooth mode, long press FN+1/2/3 until the light flashes rapidly, enter the corresponding device pairing mode, and use it after successful pairing.
b) Switching: Switch to Bluetooth mode, short press FN+1/2/3, switch to the corresponding device to use. -
Device Sleep: In wireless or Bluetooth mode, three minutes does not work, enter the first level of hibernation, lights off but keep connected; ten minutes does not work, enter the second level of hibernation mode, disconnected at this time, need to enter after waking up automatically reconnect.
FN Function
FN+ESC: hold press 3S to Reset | FN+→: Adjust the light color |
---|---|
FN+F1: “This PC” | FN+↑: Light brightness + |
FN+F2: “Homepage” | FN+↓: Light brightness – |
FN+F3: “Calculator” | FN+1: VGN V98PRO BT1 |
FN+F4: “Player” | FN+2: VGN V98PRO BT2 |
FN+F5: Previous song | FN+3: VGN V98PRO BT3 |
FN+F6: Next song | FN+4: 2.4G |
FN+F7: Pause | FN+=: Light speed + |
FN+F8: Play | FN+-: Light speed – |
FN+F9: Mute | FN+PGUP: Switch light |
FN+F10: Voice + | FN+PGDW: Switch light |
FN+F11: Voice – | FN+WIN-L: Lock win |
FN+F12: Email | FN+S: MAC Mode |
FN+DEL: ON/OFF Backlight | FN+A: Windows Mode |
FN+←: Switch light direction |
Power Light
- When the battery is too low, the keyboard space bar indicator will flash red, prompting you to charge.
- Inserted into the USB charging, press and hold the FN + CTRL_R, spacebar indicator light blue to show charging, light green to show full.
- When not inserted into the USB, press and hold FN + CTRL_R, spacebar indicator light green to show high battery, light yellow to show medium battery, light red to show low battery.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection gainst harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.