MECHKEYS Z2 Zaopin Wireless Mouse User Manual
- June 16, 2024
- MECHKEYS
Table of Contents
MECHKEYS Z2 Zaopin Wireless Mouse
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Installation
- Ensure the device is placed in a well-ventilated area.
- Connect the necessary cables following the provided diagram.
- Power on the device using the designated power button.
Operation
- Familiarize yourself with the device’s controls and settings by referring to the user manual.
- Use the device according to its intended purpose and recommended guidelines.
- In case of any malfunctions or unusual behavior, refer to troubleshooting section in the manual.
Maintenance
- Regularly clean the device using a soft, dry cloth to prevent dust buildup.
- Avoid exposing the device to extreme temperatures or moisture.
- Periodically check for software updates to ensure optimal performance.
Frequently Asked Questions
- Q: What should I do if the device stops working suddenly?
- A: Check the power source, connections, and consult the troubleshooting section of the manual for guidance.
- Q: Can I modify the device for enhanced performance?
- A: Any modifications not approved by the manufacturer may void warranty and could lead to unsafe operation. It is recommended to\ use the device as intended.
Mouse Schematic Diagram
- Left button
- Right button
- Scroll wheel/Middle button
- Forward
- Backward
- Mouse status indicator
- DPI
- Wired/ Charging port
- Bluetooth/OFF/2.4G switch
Installation and Use
Installation instruction
- Open the package and take out the receiver, and connect it to the USB interface of the computer motherboard.
- Turn the switch at the bottom of the mouse to BT or 2.4G position.
- For the first installation, please use it after the computer has finished detecting the mouse automatically.
- Through the TYPE-C cable, the mouse and the computer can be connected to the wired mode of operation.
- If more personalized settings are needed, please visit the official website and download the driver.
Usage
- For 2.4G mode, the mouse and receiver have been well paired from the factory and can be used directly.
- For Bluetooth mode, it is necessary to pair the computer with the mouse before using it.
Bluetooth pairing method:
Turn the switch on the bottom of the mouse mode to BT gear, and then press and hold the left, middle and right buttons of the mouse at the same time for three seconds, at this time, the indicator light shows a blue light flashing rapidly, the mouse enters the Bluetooth to be searched, then open the Bluetooth addition interface of the computer, select the “zaopinZ2” and add it, and then you can use it after successful addition.
Low power and charging indication
- When the power of the mouse is too low, the status indicator shall flash in red, at this time, it is necessary to charge the mouse through the TYPE-C cable.
- When charging, the mouse status indicator shall flash in purple to indicate that it is charging, and the power indicator shall turn off when it is full.
- If you do not use the mouse for a long time, it is recommended to turn off the mouse power.
About warranty
- The whole machine shall be warranted free of charge for 12 months from the date of purchase.
Exemption clause:
- Exceed the warranty period
- Abnormal use and human damage
- Natural consumption, abrasion and aging of the casing, plug-in parts and mechanical devices, etc.
- Failure or damage caused by repair or disassembly by unauthorized professional organizations or personnel
- Failure or damage caused by natural disasters and other irresistible factors
- Private alteration or damage to the product traceability marking
- Gifts attached to the product during the sales process.
- Official website: www.zaopinworld.com
- Service hotline: 0755-33239618
- E-mail: [email protected]
After-sales service address:
To Mr. Zhu, Zaopin After-sales Service Department, Room 1303, Dahong Hi-Tech Park, No.6-18, Xinqiao Street, Bao’an District, Shenzhen vv
Product parameter
Microswitch replacement diagram
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cmbetween the radiator and your body