MARVO HZ-04 RGB Permium Headset Stand with 4 X USB port User Manual

: June 9, 2024
: MARVO

Table of Contents

MARVO HZ-04 RGB Permium Headset Stand with 4 X USB port
Product Presentation
Technical Specifications
Safety Notes
Installation
**Use
Troubleshooting
Warranty Conditions
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARVO HZ-04 RGB Permium Headset Stand with 4 X USB port

MARVO-HZ-04-RGB-Permium-Headset-Stand-with-4-X-USB-port-
product

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cza.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Product Presentation

Features

Conveniently store your headphones and keep them always in reach.
4-port USB hub with data transfer rates up to 300 MB/S.
RGB illumination with seven special effects.

Technical Specifications

IC GL3510+EM103
Operating Voltage 5V
Operating current ≤ 200 mA
Connectors 4x USB (output)
Backlight RGB
Cable length 1 m
Dimension 255 x 95 x 95 mm

Safety Notes

To prevent possible hearing problems, do not use the headphones at high volume for long periods of time.
Keep the equipment dry. Keep away from Precipitation, humidity and all types of liquids or condensation may contain minerals that corrode electronic circuits.
Never use the product with wet hands.
Do not use or store the equipment in dusty or dirty areas. Do not store the equipment under high temperature conditions (this may damage it).
Do not store the equipment under low temperature conditions (when it returns to normal temperature, condensation may form inside it which may damage the equipment).
Do not drop, knock, or shake the equipment (use may result in breakage).

Installation

Insert the USB plug connector into the USB socket.
The system will automatically install the identification device

**Use

MARVO-HZ-04-RGB-Permium-Headset-Stand-with-4-X-USB-port-fig
1 **

Insert the headset stand into the attachment slots. Connect to PC using the USB cable.

Press the LED power button to turn ON lighting or cycle through the 6 different colors and rainbow mode. Press and hold the LED power button for 3 seconds to turn off lighting. MARVO-HZ-04-RGB-Permium-Headset-Stand-with-4-X
-USB-port-fig 3

Place your headset on the stand.
NOTE: Headset not included. Do not drop or press down on the headset stand with excessive force.

Troubleshooting

In case of incorrect operation follow the steps below:

Check the integrity of the connectors.
Check the connection to the computer correctly.
Check the correctness of your computer settings.
Disconnect and reconnect the equipment; restart the computer.

If the problem persists, please contact your local seller.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This product complies with the essential requirements of Directives 2014/30/EU and 2011/65/EU including amendments

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.