Haylou GT6 True Wireless Earbuds User Manual
- June 9, 2024
- Haylou
Table of Contents
GT6 True Wireless Earbuds
User Manual
Overview
How to Wear
Gently insert the earbud into the ear canal, adjust the earbud to the most
comfortable wearing state.
When calling, adjust Mic towards mouth to gain better talking experience.
How to Charge
For first time use, please remove the isolation film on the charging contacts
of both earbduds. Then fully charge the charging case and earbuds.
Plug in the charging cable to charge the earbuds and the charging case at the
same time. The charging indicator light will be solid red when the charging
case is not fully charged. The indicator light goes out after fully charged.
Power-on
- When the earbuds are in the case, take them out to auto power on.
- If earbuds are out of case and in power-off state,keep touching the MFB button for about 1.5s to power on.
Power-off
- Put back to charging case to auto power off
- When in power-on state, keep touching the MFB button for about 4.5s (LED glows solid red for 2s).
How to Pair
Automatic connection: Take two earbuds out from the charging case
simultaneously, the earbuds will power on and connect with each other within
5s. When lights on both earbuds flash white slowly, open device Bluetooth and
search “Haylou GT6”, finally click it to complete the connection.
Put the earbuds back to the charging case and repeat the above operation if
the connection fails. After the first connection, the earbuds can be
automatically connected to the last paired device (Bluetooth needs to be
turned on).
Switch between mono and stereo mode: It is stereo mode after two earbuds are
successfully connected. Put one back into the case to power off, the other
will enter mono mode. Or pick it up again to resume stereo mode.
Manual connection:
When earbuds are turned off, manually turn on the two earbuds. Wait 5s for the
earbuds to turn on and connect with each other. When lights on both earbuds
flash white slowly, turn on device Bluetooth to connect.
Functions
Answer the Second Call
When there is a new incoming call during a call, click the MFB button to keep
the first call and answer the second call, then double click the MFB button to
switch back to the first call and keep the second call. During a three-party
call, click the MFB button to hang up the current call.
Factory Setting
- The earbuds are charging in the charging case (light glows solid red or white after fully charged within 1 minute).
- Long press the two earbuds simultaneously for about 10s, release after LED alternately flashes red and white 3 times.
- Take the earbuds out from the charging case until LED flashes white slowly.
- Clear phone pairing records, follow the pairing steps to complete Bluetooth connection.
Audio only Outputs from Single Earbud
It’s unusual indeed, please refer to the following operation steps if the
situation occurs:
- Put the earbuds back into the charging case, and then take them out again to connect.
- Refer to the reset steps to reconnect the Bluetooth device.
Other Charging Problems
- White indicator light goes out after 1 minute. The earbuds have been fully charged.
- When the charging case is out of power, the earbuds cannot be charged and keep the original connecting status.
- The indicator light will go out after the charging case is fully charged.
Package List
Earbuds, charging case, user manual.
Basic Parameters(earbuds)
Operation range: 10m (open space with no obstacle)
Battery capacity: 35mAh(single earbud)
Charging time: approx. 1.5h
Talk time: approx. 4h
Standby time: approx. 60h
Input parameter: 5V = 100mA
Battery type: li-ion
Bluetooth version: V5.2
Basic Parameters(charging case)
Input parameter: 5V = 500mA
Output parameter: 5V = 150mA
Charging time: approx. 2h
Battery capacity: 310mAh
Battery type: li-ion
Caveats
Warning
- Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
- Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
- Keep the indicators away from the eyes of children and animals while using the earphones.
- Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
- Do not wipe and dean the earphones or their case with alcohol or other volatile liquids.
- Avoid any contact with liquids.
Note
- Please read this user manual carefully before using the product and please properly store it.
- When using for the first time, please fully charge this product.
- Please charge the product, in case it has not been used over two weeks.
- Please use certificated charger.
- Do not wear earphones for a long term to protect your hearing.
- Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.
FCC Requirement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user ‘s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth.
Warranty Card
Warranty Period 12 months after you purchase this item. ( or you may inquire
your local shopper for more details.) Free Service Supposing any defects
caused by quality issues occur within the warranty period, please take this
warranty card and purchase receipts to your distributor for free exchange
service.
Model Number………………..
Date of Purchasing……………………
User’ s Name………………………………
User’ s Phone……………………………….
Use? s Address……………………………
Shops s Name……………………
Shop’ s Address……….
Comments
Free exchange service will not be accessed under following circumstances:
- Damages caused by unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
Manufacturer:
Dongguan Liesheng Electronic Co., Ltd.
Address: Room 401-410,
Building 1, No. 86 Hongtu Road,
Nancheng District, Dongguan City,
Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>