Troll 112 Panel Handler Instruction Manual
- June 9, 2024
- TROLL
Table of Contents
Troll 112 Panel Handler Instruction Manual
The Troll® Panel Handler Model 112 makes light work of hustling drywall,
plywood and other heavy building panels around the work site. Its unigue
design locks the load vertically for easy mobility. Patented omni-directional
design makes fast, safe handling of building loads in tight quarters a snap.
The 250 lb. capacity hauls 4 sheets of half-inch board as well as large
banquet tables and solid core doors.
Using the Troll® Model 112
Step 1
Position the Troll® in the middle of the load with the SLIDE CLAMP up and the
LEG PIPE down. Lift one end of the load and place it in the shoe of The
Troll®.
Step 2
Move the SLIDE CLAMP down on the SLIDE POLE to secure the load.
Step 3
Hold the SLIDE CLAMP down with one hand and use your other hand to pull up on
the SLIDE POLE. This raises the stand.
Step 4
You’re now ready to roll.
Step 5
Just tilt the Troll® back on the swivel caster, pull it away from the wall and
you’re off. You can use this same tilting action to position the Troll® for
easy off-loading when you reach your destination.
If you have questions about your Troll® Model 112, please call us toll free at
1800-448-0222. We can also be reached on the web at
www.telproinc.com or by mail at Telpro Inc., 7251
South 42nd Street, Grand Forks, ND 58201. Thank you for choosing the Troll®,
we hope you’re happy with your purchase.
SAVES YOUR BACK + SPEEDS YOUR WORK = MAKES YOU MONEY!
This product contains trace amounts of the following items which are known to
cause cancer and/or developmental harm in the state of California.
These chemicals are not hazardous under product’s intended use. Please review
CAS# for more information.
