baybee PISTACHIO BS101 Chair Mounted Seat Instruction Manual

baybee PISTACHIO BS101 Chair Mounted Seat

Overview

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING!

• Never leave the child unattended.
• Always use the restraint system and ensure it is correctly fitted.
• Always use the chair attachment system and ensure it is correctly fitted before use.
• Always check the security and the stability of the product on the adult chair before use.
• Do not use this product on stools or benches.
• This product is intended for children able to sit unaided (minimum 6 months) and up to 36 months or a maximum weight of 15 kg.
• Be aware of the risk of tilting when your child can push its feet against a table or any other structure. Make sure that the adult chair with the chair mounted seat is placed in a position where the child is not able to use its feet to push against the table or any other structure as this can cause the tip over of the adult chair supporting the chair mounted seat.
• Do not use the chair mounted seat if any part is broken, torn or missing.
• Do not use accessories or replacement parts other than those supplied or approved by the manufacturer. Otherwise, the booster chair may lose stability.
•  The booster seat is only to be used with standard kitchen or dining room chairs. Never use the booster seat on a tabletop, stool, swivel chair, or any other seating surface where the straps can not be secured properly.
• This product is intended to be mounted on an adult chair with minimum dimensions: backrest height 44 cm, seat length 32 cm, seat width 33 cm.
• Use the booster seat only for its intended purpose. Never use the booster seat in motor vehicles as a car seat.
• Do not use the product before making sure that all parts are in good condition, correctly placed and fixed.
• Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
• The product should only be assembled and fit to adult chair by an adult.
• Never lift, move, fold, adjust or repair the seat when there is a child in it. This can injure the child.
• Do not make changes, improvements or modifications to the construction, because this may risk the safety of your child. If a problem arises during the use and operation with the product, contact an authorized repair shop or the sales agent you bought the high chair from for consultation or repairs.

ASSEMBLY INSTRUCTIONS

IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only. Check the securing of the fixation after each operation

COMPONENTS

A. Booster seat; B. and C. Double tray (outer and inner parts); D. Toys for being fitted on the tray surface (2pcs); E. Feet (4pcs).

BOOSTER SEAT ASSEMBLY

Strictly follow the instructions and sequence for assembling the product as shown in the diagrams.

WARNING! Make sure that the base is assembled correctly and is stable, this ensures the safety of your child!

1. Installing of the booster seat’s feet Insert the four booster feet (E) into the allocated holes in the bottom of the booster (A). Align the feet with the fixed grooves inside the holes when inserting. To adjust the feet height press in the button and adjust feet to one of the three heights available.
2. Fitting the tray Slide the tray (B) onto the holders either side of the booster seat. The deeing tray can be adjusted into 3 positions. Gently slide the tray back and forth untildesired position is chosen. Insert the inner tray (C) into the feeding tray. Attention! Use the tray always in combination with safety belts! The tray is not intended to protect the child from falling.
3. Mounting toys on the feeding tray Insert the toys (D) into the holes located on the tray. With light pressure, fix them, making sure that they are securely attached to the tray. To remove the toys, clench the bottom of the toy and pull it out of the slot.

FITTING THE BOSSTER SEAT TO THE ADULT CHAIR

1. Place the booster seat on an adult chair with minimum dimensions indicated in Figure 8.

2. Wrap the webbing strap around the back of the adult chair and fasten buckle to secure.

3. Wrap the webbing strap around the seat of the adult chair and fasten buckle to secure.

4. Adjust the webbing straps to tighten if required. Tighten the belts from the length adjustment buckles so that the booster seat is securely fixed and stationary in relation to the chair.
   Important! Things on which to pay attention when isntalling the booster seat on the adult chair:

   • Always use both sets of chair straps to completely secure booster to the chair.
   • Make sure all pieces are assembled and fixed correctly.
   • If chair is cushioned and cushion cannot be removed, be certain that the bootom chair strap is fastened snugly after putting child in the seat.

INSTALLING THE RESTRAINT SYSTEM

Always secure child in booster seat using restraint straps. Never place the child on the booster seat without the safety belts. Unbutton the mechanism before placing the baby. Place the baby and fasten the belts (you will hear a “click” sound when properly fixed in the buckle). Fasten the belts around the child’s waist in a position that is comfortable for him. Check the restraint system by pulling it slightly away from your child. The restraint system must remain attached.

INSTRUCTIONS FOR MAINTENANCE AND CLEANING

Cleaning and storing the product:

• Wipe the plastic and metal parts of the product only with soft cloth wetted with warm water.
• Never clean with agents that contain abrasive particles, ammonia, bleach or alcohol.
• Leave the product to dry out completely after cleaning before storing it.
• Do not place any items on top or inside the high chair in order to avoid damage of the frame.
• Store the product indoors, in dry and well-ventilated places. Do not leave or store the high chair exposed to the negative effects of the external factors – direct sunlight, rain, snow, damp or harsh temperature fluctuations.

Maintenance

• In order to ensure the security of your child and the extended period of use of this high chair, we recommend you to regularly check the locking mechanisms, safety belts and the fasteners, connectors and mechanisms for adjustment of the seat and the fixing mechanisms for wearing, damage or breaking.
• If you find any lose connections, broken, cracked or damaged parts, they must be repaired or replaced with original parts from an authorized repair service. For this purpose, contact the commercial site you bought the product from.
• If you find any damage or that any function of the high chair does not work, you must stop using it, until the damage is found. For this purpose, contact the commercial site you bought the product from Clean only with a soft, slightly damp cloth.

Manufactured for Moni in PRC Manufacturer and Importer: Moni Trade Ltd. Address: Bulgaria, Sofia, Trebich, 1 Dolo Str., Phone number: 003592/936 07 90 Website: www.moni.bg

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>