LACIE Rugged Mini SSD 2TB User Manual

: June 16, 2024
: LaCie

Table of Contents

Rugged Mini SSD 2TB
Welcome
Geng Started
Use Toolkit to Set Up Backups and More
Works with iPad USB-C
Safely Remove Device From Your Computer
Oponal Formang
Frequently Asked Quesons
Regulatory Compliance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rugged Mini SSD 2TB
User Manual

Rugged Mini SSD 2TB

Click here to access an up-to-date online version of th is document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.

Welcome

Durable, fast, and portable, LaCie Rugged Mini SSD brings a seamless workflow to your project with USB and Thunderbolt 4 compatibility.
For common questions and answers about your device, see Frequently Asked Questions or visit LaCie Support France.
Box contents

LaCie Rugged Mini SSD
USB-C cable (USB 3.2 Gen 1)

Minimum system requirements
Ports
Use the included cable to connect your LaCie device to a computer with a USB-C port.
Operang system
Go to Operating System Requirements for Seagate Hardware & Software.
Minimum free disk space
600MB recommended.
Ingress Protecon rang
The Ingress Protection (IP) rating is a standard for defining the types of protection supported by equipment and devices. The two-digit code for IP lets users know the conditions that the device can withstand. The two digits are independent, with each number representing a different level of protection.
LaCie Rugged Mini SSD is rated IP54.
5: Dust protected—Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment.
4: Spraying of water—Water splashing against the enclosure from any direction shall have no harmful effect, utilizing either: a) an oscillating fixture, or b) a spray nozzle with no shield.
Rugged Mini SSD has also been tested for the following:

Drop resistance—Dropped from heights up to 3 meters (in non-operating mode).

Geng Started

Connect LaCie Rugged Mini SSD

Remove the top port cover from Rugged Mini SSD.
Plug one end of the USB-C cable into the USB-C port on Rugged Mini SSD.
Plug the other end of the cable into a USB-C port on your computer.

Set up LaCie Rugged Mini SSD
The setup process lets you:

Register your LaCie Rugged Mini SSD| Get the most from your drive with easy access to information and support.
---|---
Install Toolkit| Manage mirror folders, backup plans (Windows only), and more.

Your computer must be connected to the internet to register your device and install Toolkit.
Start here
Using a file manager such as Finder or File Explorer, open LaCie Rugged Mini SSD and launch Start Here Mac or Start Here Win. If your drive no longer has a Start Here icon, you can register your device on lacie.com. Toolkit can be downloaded from the Toolkit support page.
Register your device
Enter your information and click Register. Download Toolkit
Click the Download button. Install Toolkit
Using a file manager such as Finder or File Explorer, go to the folder where you receive downloads.

Mac—Open the LaCieToolkit.zip file and click on the LaCie Toolkit Installer to launch the application.
Windows—Click on the LaCieToolkit.exe file to launch the application.

Use Toolkit to Set Up Backups and More

Toolkit provides useful tools that let you easily create and manage mirror folders, backup plans, and more.
Start a backup plan (Windows only)
Create a plan customized for the content, storage device, and schedule of your choosing.

Click here for details on setting up a backup plan.

Create mirror folders
Create a mirror folder on your PC or Mac that is synced to your storage device. Whenever you add, edit, or delete files in one folder, Toolkit automatically updates the other mirror folder with your changes.

Click here for details on creating a mirror folder.

Works with iPad USB-C

Your LaCie storage devices can be used with higher-end iPads. This is a great option for moving files between computers, cloud services and external storage. The iPad is also a perfect mobile editing station for importing media to more advanced imaging and video apps.
See External Storage and iPadOS for details on the following:

Connecting Storage to Compatible iPads
Available Actions
Selecting Multiple Items
Accessing Storage Devices in an App
Supported External Storage Devices and USB Hubs
External Storage Performance on iPad Versus a Computer
Thunderbolt Storage Devices
Battery Use
Ejecting
Storage Formats
Password Protection
Toolkit and First Use Connections

Safely Remove Device From Your Computer

Always eject a storage drive from your computer before physically disconnecting it. Your computer must perform filing and housekeeping operations on the drive before it is removed. Therefore, if you unplug the drive without using the operating system’s software, your files can become corrupt or damaged.
Windows
Use the Safely Remove tool to eject a device.

Click the Safely Remove Hardware icon in your Windows System Tray to view the devices you can eject.
If you don’t see the Safely Remove Hardware icon, click the Show hidden icons arrow in the system tray to display all icons in the notification area.
In the list of devices, choose the device you want to eject. Windows displays a notification when it is safe to remove the device.
Disconnect the device from the computer.

Mac
There are several ways you can eject your device from a Mac. See below for two options.
Eject via Finder window

Open a Finder window.
On the sidebar, go to Devices and locate the drive you want to eject. Click the eject symbol to the right of the drive name.
Once the device disappears from the sidebar or, the Finder window closes, you can disconnect the interface cable from your Mac.

Eject via Desktop

Select the desktop icon for your device and drag it to the Trash.
When the device icon is no longer visible on your desktop, you can physically disconnect the device from your Mac.

Oponal Formang

Your device is preformatted exFAT (Extended File Allocation Table) for compatibility with both Mac and Windows computers.
Choosing a ﬁle system format
When choosing a file system format, consider whether compatibility or performance is more important in your everyday use of the drive.

Compatibility—You need a cross-platform format because you connect your drive to both PCs and Macs.
Performance—You connect your drive with only one type of computer, so you can optimize file copy performance by formatting the drive in the native file system for your computer operating system.

Compability with both Windows and Macs
exFAT is a lightweight file system compatible with all versions of Windows and modern versions of macOS.
If you use your drive with both PCs and Macs, format your drive in exFAT. While exFAT offers crossplatform access to both computers, keep in mind the following: exFAT is not compatible or recommended for built-in backup utilities such as File History Windows) and Time Machine (macOS). If you want to use one of these backup utilities, you should format the drive in the native file system for the computer running the utility. exFAT is not a journaled file system, which means it can be more susceptible to data corruption when errors occur or the drive is not disconnected properly from the computer.
Opmized performance for Windows
NTFS (New Technology File System) is a proprietary journaling file system for Windows. macOS can read NTFS volumes, but it can’t natively write to them. This means your Mac can copy files from an NTFSformatted drive, but it can’t add files to or remove files from the drive. If you need more versatility than this one-way transfer with Macs, consider exFAT.
Opmized performance for macOS
Apple offers two proprietary file systems. Mac OS Extended (also known as Heirarchical File System Plus or HFS+) is an Apple file system used since 1998 for mechanical and hybrid internal drives. macOS Sierra (version 10.12) and earlier use HFS+ by APFS (Apple File System) is an Apple file system optimized for solid state drives (SSDs) and flash-based storage systems, though it also works with hard disk drives (HDDs). It was first introduced with the release of macOS High Sierra (version 10.13). APFS can only be read by Macs running High Sierra or later.
When choosing between Apple file systems, consider the following:

Windows cannot natively read or write to APFS or HFS+ volumes. If you need cross-platform compatibility, you should format the drive in exFAT.
If you intend to use your drive with Time Machine:
The default format for macOS Big Sur (version 11) and later is APFS.
The default format for macOS Catalina (version 10.15) and earlier is HFS+.
If you intend to use your drive to move files between Macs running older OS versions, consider formatting your drive in HFS+ rather than APFS.
macOS file systems and Android: Formatting your drive for macOS may not be supported with connections to Android mobile devices.

Learn more
For additional considerations when choosing a file system format, see File System Format Comparisions.
Formang instrucons
For instructions on formatting your drive, see How to format your drive.

Frequently Asked Quesons

For help setting up and using your LaCie hard drive, review the frequently asked questions below. For additional support resources, go to LaCie customer support.
All users
Problem: My ﬁle transfers are too slow

Q: Are both ends of the USB cable firmly attached?

A: Review troubleshooting tips for cable connections below: Check both ends of the USB cable and make sure that they are fully seated in their respective ports. Try disconnecting the cable, waiting 10 seconds, and then reconnecting it. Try a different USB cable.

Q: Are there other USB devices connected to the same port or hub?

A: Disconnect other USB devices and see if the hard drive’s performance improves.

Problem: I have an older computer with USB 3.0 (Type A) ports

Q: Will my hard drive’s USB 3.2 Gen 1 port work with my computer’s USB 3.0 port?

A: Yes, the device is compatible with USB 3.0 ports, however, the product does not include a cable with a USB Type A connector.

Problem: I must use a USB hub for my USB devices

Q: Can I use my hard drive with a USB hub?

A: Yes, the hard drive can be connected to a USB hub. If you use a hub and encounter detection problems, slower than normal transfer rates, random disconnection from your computer or other unusual issues, try connecting the hard drive directly to the computer’s USB port. Some USB hubs are less than efficient with power management, which can be problematic for connected devices. In such a case, consider trying a powered USB hub that includes a power cable.

Problem: The provided USB cables are too short

Q: Can I use my hard drive with a longer cable?

A: Yes, provided it is certified according to USB standards. However, LaCie recommends using the cable shipped with your hard drive for the best results. If you use a longer cable and experience problems with detection, transfer rates or disconnection, use the original cable included with your hard drive.

Problem: I’m receiving ﬁle transfer error messages

Q: Did you get an “Error -50” message while copying to a FAT32 volume?

A: When copying files or folders from a computer to a FAT32 volume, certain characters in the names cannot be copied. These characters include, but are not limited to: ? / : Check your files and folders to ensure that these characters are not in the names. If this is a recurring problem or you cannot find files with incompatible characters, consider reformatting the drive to NTFS (Windows users) or HFS+ (Mac users). See Optional Formatting and Partitioning.

Q: Did you get an error message telling you that the drive has been disconnected when coming out of sleep mode?

A: Ignore this message since the drive remounts on the desktop despite the pop-up. LaCie drives conserve power by spinning down when you set your computer to sleep mode. When the computer awakes from sleep mode, the drive may not have enough time to spin up, causing the pop-up to appear.

Mac
Problem: The hard drive icon does not appear on my desktop

Q: Is your Finder configured to hide hard drives on the desktop?

A: Go to Finder and then check Preferences | General tab | Show these items on the desktop. Confirm that Hard Disks is selected.

Q: Is your hard drive mounting in the operating system?

A: Open Disk Utility at Go | Utilities | Disk Utility. If the hard drive is listed in the left-hand column, check your Finder preferences to see why it is not displayed on the desktop (review the question above).

Q: Does your computer’s configuration meet the minimum system requirements for use with this hard drive?

A: Go to the following link for a list of supported operating systems: www.lacie.com/os.

Q: Did you follow the correct installation steps for your operating system?

A: Review the installation steps in Getting Started.

Problem: I want to use Mobile Drive with Time Machine.

Q: Can I use Mobile Drive with Time Machine?

A: Yes. The drive is preformatted exFAT for use with both PC and Mac. For Time Machine, it must be reformatted to Mac. Reformatting will delete all data previously stored on the drive. Go to www.lacie.com/time-machine for more details.

Windows
Problem: The hard drive icon doesn’t appear in Computer

Q: Is the hard drive listed in Device Manager?

A: All drives appear in at least one place in Device Manager. Type Device Manager in Search to launch it. Look in the Disk Drives section and, if necessary, click the Plus (+) icon to view the full list of devices. If you’re uncertain that your drive is listed, safely unplug it and then reconnect it. The entry that changes is your LaCie hard drive.

Q: Is your hard drive listed next to an unusual icon?

A: Windows Device Manager usually provides information about failures with peripherals. While the Device Manager can assist with troubleshooting most problems, it may not display the exact cause or provide a precise solution. An unusual icon next to the hard drive can reveal a problem. For example, instead of the normal icon based on the type of device, it has an exclamation point, question mark or an X. Right click this icon and then choose Properties. The General tab provides a potential reason why the device is not working as expected.

Regulatory Compliance

Product Name	LaCie Rugged Mini SSD
Regulatory Model Number	LRD0SV3

China RoHS 2
China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, we determined this product’s Environmental Protection Use Period (EPUP) to be 20 years in accordance with the Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products, SJT 11364-2014.

Part Name	Hazardous Substances
(Pb)	(Hg)
SSD	X
Bridge PCBA	X
Power Supply (if provided)	X
Interface cable (rf provided)	X
Other endosure components	0

This table is prepared in accordance with the provisions of SJ/T 11364-2014
0: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/126572.
X: Indicates that the hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/126572.

Taiwan RoHS
Taiwan RoHS refers to the Taiwan Bureau of Standards, Metrology and Inspection’s (BSMI’s) requirements in standard CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Beginning on January 1, 2018, Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663. This product is Taiwan RoHS compliant. The following table meets the Section 5 “Marking of presence” requirements.

Product Name: LaCie Rugged Mini SSD, Model: LRDOSV3

Unit| Restricted Substance and its chemical symbol
(Pb)| (Hg)| (Cd)| (Cr’)| (PBB)| (PBDE)
SSD| | 0| 0| 0| 0| 0
Bridge PCBA| —| 0| 0| 0| 0| 0
Power Supply (if provided)| —| 0| 0| 0| 0| 0
Interface cable (if provided)| —| 0| 0| 0| 0| 0
Other enclosure components| 0| 0| 0| 0| 0| 0
Note 1. “0” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 2. ” —” indicates that the restricted substance corresponds to the exemption.