CONNECT CSH-PLGPM-001 Smart WI-Fi Plug User Manual
- June 9, 2024
- CONNECT
Table of Contents
User Manual Smart Wi-Fi Plug
with Power Monitoring
CSH-PLGPM-001
What’s In The Box
- Smart Plug
- User Manual
Specifications
| Power Supply: | AC100 ~ 240V |
|---|---|
| Input Frequency: | 50/60Hz |
| Load Current: | 10A max 2400W Resistive load |
| Wi-Fi: | Wi-Fi 802.11 b/g/n |
| Wi-Fi Frequency: | 2.4GHz |
| Security: | WAP/WAP2 |
| Encryption Type: | WEP/TKIP/AES |
| Working Consumption: | <0.9W |
| Standby Consumption: | <0.6W |
| Working Temperature: | -20°C – 50°C, < 80% Humidity |
| Storage Temperature: | -20°C – 60°C, < 80% Humidity |
| Weight: | 7 0 g |
| Dimensions: | 66 x 43.5 x 57.5mm |
Product Diagram
Power & Pairing Button Controls
-
Press and hold the pairing button for 5 seconds.
-
A LED indicator light will start flashing.
There are 2 flashing states: -
Fast Flashing = EZ pairing mode.
-
Slow Flashing = AP pairing mode.
Note: In this manual we cover the EZ pairing mode instructions.
Getting Started with the App
- Install the Connect SmartHome App for your Smartphone from the iOS App Store or Google Play.https://smartapp.tuya.com/connectsmarthome
- Log in with an existing Connect SmartHome account or create a new account.
Connecting to the App
- Turn on the Bluetooth function on your Smartphone.
- Press and hold the Pairing Button on the smart plug for 5 seconds till you get a fast-flashing indicator light.
- Open the Connect SmartHome_ App and tap the “+” icon to add a device.
- The smart plug icon should appear. Select “Add” under “Discovering Devices’.
- Enter your Wi-Fi details.
- Tap the “+” icon next t o the smart plug
- When finished pairing tap “Done”, then the device will appear on the Connect SmartHome App home screen.
NOTE: If you are unable to pair successfully with the smart plug, please check your Wi-Fi password and make sure you are only usinga 2.4GHz Wi-Fi connection. 5GHz connections are not supported.
Using the Plug
Adding Connect SmartHome to the Google Home App
- Open the Google Home App.
- In the “Google Home” main screen, select the “+” icon t o set up device.
- Select “Set up device” t o add new device, then select “Works with Google”.
- A list will appear showing actions and a search function to access more apps: from here, search for the Connect SmartHome App.
- Log into your Connect SmartHome account with your email address.
- Once linked, it will show the devices linked t o your account: you can assign them t o rooms. You will be prompted to authorize apps to sync.
- Click “Done” and then it will give you a list of commands available.
- When successful linked, you will see the smart plug on your “Home Control ” screen.
Troubleshooting
The Smart Plug is not connecting to the App.
- Check your Wi-Fi username and password are correct.
- Make sure you are only using a 2.4GHz Wi-Fi connection as the 5GHz band is not supported.
- I f you are unsuccessfully connecting using Bluetooth with EZ Mode. Switch the pairing mode to “AP Mode” by pressing and holding the Pairing Button for 5 seconds till you get a slow flashing light . On the app select the + icon to add device, select the Electrical category, then select Socket (Wi-Fi). Enter you Wi-Fi credentials then on the next screen in the top right change the selection from EZ Mode t o AP Mode. Follow the remaining instructions outlined i n the app to connect via AP Mode.
I cannot see any Power Monitoring data.
- Check you have a device connected t o the smart plug and that it has been switched on.
- Power usage data take 12 — 24 hours t o display in the app. You may need t o leave your device running longer for the data to update in the app.
My device is turned on but not showing any signs of power.
- Check the power is switched on i n the app.
- Check your mobile phone has a network or data connection and that it can connect to the internet.
- Check any individual power switches o r overload switches on connected devices.
“Veale for youn pecrchase!
We are 100% Australian owned & operated. To get the most out of your
product please read the user manual carefully and keep for future use.
For specific information relating t o your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
https://www.laserco.com.au/support
Visit our website
www.connectsmarthome.com.au
https://connectsmarthome.com.au/
Check us out athttps://www.youtube.com/@connect6719/videos
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>