LG 98UH5J Digital Signage Monitor Owner’s Manual

June 9, 2024
LG

98UH5J Digital Signage Monitor
Owner’s Manual 98UH5J
OWNER’S MANUAL

98UH5J Digital Signage Monitor

LG Digital Signage
(MONITOR SIGNAGE)
Please read the user manual before using this product to ensure safe and convenient use.
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

BASIC

NOTE

  • The accessories provided with your product may vary depending on the model or region.
  • Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
  • SuperSign Software & Manual
    – Visit https://partner.lge.com to download the latest SuperSign software and manual.

Checking the Accessories

LG 98UH5J Digital Signage Monitor - fig 16

Learning the Buttons

The illustrations may differ depending on the model.LG 98UH5J Digital
Signage Monitor - fig 15LG 98UH5J Digital Signage
Monitor - icon 8 : Adjusts up and down.
LG 98UH5J Digital Signage Monitor - icon 7: Moves left and right.
• :  Displays the current signal and mode.
• : Accesses the main menus, or saves your input and exits the menus.
• : Change the input signal.
• : Turns the power on or off.

GETTING READY

Connecting the IR Sensors

Connecting the cable to the product allows it to receive signals from the remote control.
The IR and light sensor is magnetic. Attach it to the front edge of the product for use.
– The illustrations may differ depending on the model.
Basic installationLG 98UH5J Digital Signage Monitor - fig
14 **NOTE**
• The signal strength of the IR and Light sensor will decrease if the sensor is not placed in front of the product.

Connecting the Eye-Bolt Bracket

The eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the two screws provided.LG 98UH5J Digital
Signage Monitor - fig 13

Attaching the LG Logo Bracket

Use one screw, inserted from behind, to attach the LG Logo Bracket to the monitor. You can position the logo according to the monitor’s direction.
LG 98UH5J Digital Signage Monitor - fig 12 Kensington Lock Device
(This feature applies only to some models.)
The Kensington lock device connector is located on the back of the monitor. For more information on installation and use, refer to the user manual provided with the locking device.
Connect the Kensington security system cable between the monitor and a table.LG 98UH5J Digital Signage Monitor - fig 11 **NOTE**

  • The Kensington lock device is an optional specification.
  • This is a general illustration of installation and may look different from the product held by the customer.

CHECKING BEFORE INSTALLATION

We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.
LG 98UH5J Digital Signage Monitor - fig 10Tilt Angle
LG 98UH5J Digital Signage Monitor - fig 9Ceiling, Floor Orientation
LG 98UH5J Digital Signage Monitor - fig 8

Installation Location

We are not responsible for product damage caused by failure to follow the guide.
Indoor
Installing on a Wall
LG 98UH5J Digital Signage Monitor - fig
7A : 100 mm or more
• The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Installing on a Recessed WallLG 98UH5J Digital Signage Monitor - fig
6 A : 100 mm or more
B : 100 mm or more
C : 100 mm or more
• The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Outdoor
Outdoor Enclosed
LG 98UH5J Digital Signage Monitor - fig 5

**Wall Mount Holder

**

To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follow s.
LG 98UH5J Digital Signage Monitor - fig 4

Model| VESA Dimensions (A x B) (mm)| Standard Dimensions| Length (Maximum) (mm)| Quantity
---|---|---|---|---
98UH5J| 800 x 400| M8| 15| 4

CAUTION

  • Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
  • If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
  • Damage to the monitor by tightening the screws too tightly may void your warranty.
  • Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.

NOTE

  • Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
  • For more information on installation, please refer to the user manual for the wall mount.

PRECAUTIONS FOR USE

Dust

The warranty will not cover any damage caused by using the product in an excessively dusty environment.

Afterimage

  • After-image appears when the product is turned off.
    – Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screensaver function.
    – Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product.

  • When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.

  • Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter  cycles are better for preventing afterimages.

• Recommended Usage Condition
1 Change the background colour and text colour at equal intervals.
– Afterimages occur less when the colours to be changed are complementary to one another.LG 98UH5J Digital Signage Monitor - fig 32 Switch the screen at equal time intervals.
– Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.LG 98UH5J Digital
Signage Monitor - fig 2

PRODUCT SPECIFICATIONS

Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

Input/Output Ports| HDMI IN 1, HDMI IN 2, HDMI IN 3, DP IN, HDMI OUT, DVI-D IN, RS-232C IN/OUT, LAN, IR & LIGHT SENSOR, USB 2.0 IN, AUDIO IN/OUT
---|---
Resolution| Recommended Resolution| HDMI1,2/ DisplayPort: 3840 x 2160 @ 60 Hz
HDMI3: 3840 x 2160 @ 30 Hz
DVI-D: 1920 x 1080 @ 60 Hz
– This may not be supported on some OS or graphics card types.
Max Resolution
Embedded battery| Applied
Environmental Conditions| Operating Temperature Operating Humidity| 0 °C to 40 °C
10 % to 80 % (Condition for preventing condensation)
Storage Temperature Storage Humidity| -20 °C to 60°C
5 % to 85 % (Condition for preventing condensation)

  • Product box packaging storage conditions
    Audio| Input Sensitivity| 0.7 Vrms

NOTE

  • Video Daisy Chain can be configured through HDMI OUT, and Input Resolution can support up to 3840 x 2160 at 30 Hz, and it cannot be above 30 Hz.

98UH5J

Power Voltage 100-240 V- 50/60 Hz 6.5 A
Power Consumption On Mode
Sleep Mode Standby Mode .1 0.5 W
Size (Width x Height x Depth) (mm) / Weight (kg) 2191.8 mm x 1246.8 mm x 86.1

mm / 66 kg

HDMI/ DVI-D/ DisplayPort (PC) Support mode

Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
800 x 600 38. 60.
1024 x 768 48. 60
1280 x 720 45. 60.
1280 x 1024 64. 60.
1680 x 1050 65. 60.
1920 x 1080 68. 60
3840 x 2160 68. 30 HDMII/2/3, DisplayPort
3840 x 2160 135 60 HDMII/2, DisplayPort

HDMI/ DisplayPort (DTV) Support mode

Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark
480/60p 32. 60
576/50p 31. 50
720/50p 38. 50
720/60p 45 60
1080/501 28. 50
1080/601 34. 60
1080/50p 56. 50
1080/60p 67. 60.
1080/60p 68. 60
2160/30p 68. 30 HDMI1/2/3, DisplayPort
2160/50p 113. 50 HDMII/2, DisplayPort
2160/60p 135 60 HDMI1/2, DisplayPort

NOTE

  • Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz.
  • Vertical frequency: The product display functions by the screen image changing dozens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.

Wireless module (LGSBWAC92) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)
frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5
5150 to 5725
5725 to 5850| 18
18
I 2
Bluetooth
Frequency range (MHz)| Output power (Max.) (dam)
2400 to 2483.5| 8
•As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

(Only Nigeria)
Connection and use of this communication equipment is permitted by the Nigerian
Communications Commission.
(Only Hong Kong)

Wireless module (LGSBWAC92) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5
5150 to 5350
5725 to 5850| 18
18
12
Bluetooth
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5| 8
•As band channels can vary per countiy, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
Wireless module (LGSBWAC92) Speciflca

Wireless LAN (IEEE 802.11 a/b/g/n/ac)
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5
5150 to 5350
5725 to 5850| 17.5
17.5
12
Bluetooth
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5| 8
•As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

(Only Philippines)

(LGSBWAC92) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5
5150 to 5725
5725 to 5850| 18
18
18
Bluetooth
Frequency range (MHz)| Output power (Max.) (dBm)
2400 to 2483.5| 8
•As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
•For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
•FCC ID: BEILGSBWAC92 / IC: 2703H-LGSBWAC92

LICENCE

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.
MODEL……………………
SERIAL NO………………
Temporary noise is normal when powering ON or OFF this device.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals