hakel PIIIM PV 200-2 V Series Surge Arrester for Photovoltaics Instruction Manual
- June 9, 2024
- hakel
Table of Contents
hakel PIIIM PV 200-2 V Series Surge Arrester for Photovoltaics Instruction
Manual
Instruction
CENTRAL POINT: FOR MEASURING
TECHNICAL DATA
Type PIIIM PV 200/2 PIIIM PV 200 DS/2 Vseries
Max. continuous operating voltage (L+,L-)Max. continuous operating voltage
(L,PE)| UCPV| 200 V DC100 V DC
Open circuit voltage of PV generator (L+,L-)| UOCSTC| UOCSTC < UCPV/1,2 = 167
V
Short circuit withstand| ISCWPV| 25 A
Max. discharge current (8/20)| Imax| 40 kA
Nominal discharge current (8/20)Application| In| 15 kAL+/L-, L+/PE, L-/PE
Voltage protection level at In (L+/L-)Voltage protection level at In (L+/PE)|
UP| < 800 V< 400 V
Response time| tA| < 25 ns
Weight| m| 180 g
Lifetime| | min.100 000 h
Article number| |
PIIIM PV 200/2PIIIM PV 200 DS/2| | 27 063
27 064
TEST
REMOTE MONITORING
RECOMMENDED CONNECTION
NOTE: For the PV inverters, acceptable overvoltage is linked to maximum open circuit voltage and to technological choice of the manufacturer. If no other information is given, the overvoltage withstanding can be estimated to 5x U . 0CSTC
Safety Instruction
The device may only be connected and installed by an electrically skilled staff. National standards and safety regulations must be abided The device must be checked for external damage prior to installation. If any damage or other defects are found, the device must not be installed. Its use is only permitted within the limits stated in these installation instructions. If the device is overloaded above the given values, it can be destroyed a n d a l s o o t h e r e q u i p m e n t connected to the device can be damaged. Opening or otherwise tampering with the device invalidates the warranty.
