VOVO VM-001D Stylement Non-Electric Bidet Attachment Instruction Manual

VOVO VM-001D Stylement Non-Electric Bidet Attachment

• Thank you for purchasing our manual bidet.
• The manual includes a warranty card, so please keep it carefully.
• Please read the manual carefully and use it correctly.

Safety Precautions

• Be sure to follow these safety precautions for your safety.
• This caution is to prevent any physical or material harm so please follow the safety precautions.

Caution: Violation of the indications may result in minor injury or damage. Always be careful.

• After using any function, please return the bidet control to the stop position.
  • Unnecessary water flows until the next use.
• Never disassemble, repair, or modify the product yourself.
  • It may cause malfunction.
• Do not place near flammable items such as cigarettes.
  • It may cause malfunction or injury.
• Do not spread or block the nozzle hole or between the product with your fingers.
  • It may cause malfunction or injury.
• Never step on the product, subject it to impact, or place heavy objects on it.
  • You may fall and be injured.
  • It may damage the product or cause malfunction.
• When cleaning, do not use bleach, benzine, thinner, or a scrubber, and wipe with a soft cloth moistened with diluted dishwashing detergent (neutral).
  • It may cause product damage.
• Please install the product by connecting to the water supply tightly.
  • If it is not tightened, it may cause water leakage.
  • In the event of a leak, shut off the water supply to stop water supply.
  • (Turn the lever to clockwise to lock it.)
• Close supervision is necessary when this appliance is used by or near infants, elders, or handicapped persons.
  • Children should not be permitted to use or touch this appliance without adult supervision.

Name of the Components

NAMES AND FUNCTIONS OF PARTS

VM-001D / VM-001S

1. Bidet controller
2. STOP
3. Feminine water pressure control (Adopted in VM-001D) Posterior self- nozzle cleaning (Adopted in VM-001S)
4. Posterior water pressure control Posterior self-nozzle cleaning (Auto)
5. Rigging screw
6. Detachable dual nozzle

Parts

Installation Method

Install the body on the toilet

1. Close the water supply
   • Turn the water supply valve clockwise to close it.
   • Avoid water splashing before installing the product.
2. Empty the toilet tank
   • Press the lever to drain the water from the tank until it is completely empty.
   • It is not a problem even if there is a little water left before installing the product.
3. Disassembling the existing toilet seat
   • Unscrew the toilet seat fixing cap by flipping it upwards.
   • While unscrewing, hold the bolt on the underside of the screw with your other hand to secure the screw to loosen.
   • (Please follow the instruction of your toilet seat manufacturer if need assistance)
4. Water connection
   • Disconnect the toilet hose connected to the water supply valve.
   • Connect the T-Connector to the water tank supply inlet.
   • Connect the T-Connector with the toilet hose.
   • Tightly connect the water supply valuve, T-Con nectar, and toilet hose to prevent any leakage.
   • Combine Metal Hose and T-Connector.
5. Finish the connection
   • Attach to the Metal Hose connector to the product.
   • Tightly connect the product and the Metal Hose so that there is no leakage.
6. Attached to the toilet
   • After placing the product on the toilet, adjust the position of the product up/down and left/right.
   • Make sure the nozzle is centered.
   • Put the toilet seat on top of the product and reassemble it.
   • Check again that the product does not move or fall out.
7. Open the water supply
   • Turn the water supply valve counterclockwise to open it.
   • Please check on each connection that make sure there are no water leakeage.

How to use

VM-001D / VM-001S

1. Feminine water pressure control (Adopted in VM-001D)
   • The water pressure will be increased by turning the knob counterclockwise.
2. Posterior water pressure control
   • The water pressure will be increased by turning the knob clockwise.
3. Posterior nozzle cleaning (Adopted in VM-001D)
   • The nozzle will cleans itself automatically while using the ‘Posterior wash.
4. Posterior nozzle cleaning (Adopted in VM-001S)
   • The nozzle will clean itself by turning the knob counterclockwise.

• After washing gently at first and gradually adjust the strength, remove the remaining water with a little toilet paper or towel. Because the water pressure can be easily adjustable during use, you can also experience the massage effect by quickly adjusting the intensity
• Use your function to your preference.
• If you rotate the posterior water pressure control slowly from ‘low ➔ high’, the nozzle will be drawn out and water will be sprayed.
• If you rotate the feminine water pressure controls lowly from ‘low ➔ high’, the nozzle will be drawn out and water will be sprayed.
• After each function, return the water pressure control to its original position.

Product Specification

• Size
• Product: 401x250x50(mm)
  • 15.7×9.8×1.9(in)
• Package: 440x200x75(mm)
  • 17.3×7.8×2.9(in)
• Weight
  • N.W: 448g / 0.9lb
  • G.W: 906g / 1.9lb
• Usable Water Pressure Range
  • 12.80 – 99.56 psi
  • 0.9-7.0 kgf/C2m

Product Maintenance

Limited Warranty

The product is warranted for one year according to the description written in this warranty. Please submit the below form online at www.vovo- us.com.

• Complete the above warranty card when purchasing the product.
• Check the information and keep it safe.

This warranty does not apply to the following

1. Defects and/or malfunctions from failure to properly install,operate and/or maintain the unit in accordance with the installation manual.
2. Damage from abuse, fire, flood, freeze, electrical surges, lightning strikes or any other acts of nature.
3. Damage resulting from unauthorized alterations, attachments and/or repairs.
4. If the product was not installed properly for residential use.
5. Damage from installing the unit in an environment with animals, mice or insects.
6. Damage caused by excess moisture or from water clogging the water closet.
7. Damage from not being installed in accordance with all applicable local codes, ordinances and good trade practices.
8. Color fading due to use in wrong environment.
9. Damage from consumable chemicals.
10. The warrant will be covered only when providing the date of purchase with original receipt.
11. Damage from misuse due to not following the installation manual.

VOVO USA

• 377Van Ness Ave Suite 1205-1206, Torrance, CA90501
• If you have any questions, please contact us through live chat at www.vovo-us.com or send us an email at support@imunsen.com
• Customer Support E-mail: support@imunsen.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>