ucocare B1 Baby Camera User Manual

ucocare B1 Baby Camera User Manual

We are a customer-oriented company. We are keeping to optimize our products and improve our customers service. If there are any questions or problems, please feel free to email us, we will solve your problem within 24 hours. In
addition, your product ideas and any suggestions will be much appreciated!

Appearance Brief

Warning: 10t length cable is provided in package. If it is not long enough, please use extension cord (not included) to ensure the best performance of the camera, not the USB extension cable.

Power port DC 5V+10%
Status light « Solid red light on: The camera is turning on or malfunctional
« Red Light Blinking: Awaiting WiFi connection(Slowly Blinking)
Connecting the WiFi (Quickly Blinking)
= Blue Light Blinking: It in connecting
« Solid Blue Light On: The camera runs correctly
SDcardslot «Support local SD card storage (Max.128G)
Reset « Press and hold on for 5 seconds to reset the camera

Product Instruc

APP Download and Installation
CloudEdge s available for both i0S and Android OS. Search the name ‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the App.

Notice: Please allow al the permission required during the installation, otherwise some functions cannot be used properly.

Accounts Registration

Registration process
Step1: Open the App, click “Sign up now” to register. I you already have an account, click “Log in”.
Step2: Input alegal Email address and tick the privacy aggreement. Then enter the nickname and password.
Notes: 1) Please tick “Agree” the “User Agreement and Privacy Policy’; 2) fthe verification code is sent out over time due to network problems, please try again later; 3) f register with mailbox, please check the verification code in spam mailbox f you didn’t receive.

Before you start to pair the camera to the Wi, please make sure your smartphone s in 2.4G WiFi Signal.

on from your router. All routers, no matter 5G or dual channel comes with 24G signal,

Device Adding

Step1: Click “Add Device” or “+”, and then select the corresponding camera icon to add.
Step2: Select the WiFi network and input the password, and then click “Next” Note : All routers, contains 5G router comes-with 2.4G signal as well, you just need choose the 2.4G signal during the configuration. No problem for you to switch back to 5G signal on your smartphone after pairing the camera on the app if you want.
Note: 1) Camera only supports 2.4GHz WiFi network. 2)The number of bits in the ssid and passwords of the router should not exceed 24 digits. Step3: View the operation instructions of scanning, and then click “Next”. Scan the QR code in your phone with the camera and click “Next”, when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
Step4: When connecting, you should make sure your router, mobile, and camera are as close as possible.
Step5: Al done. You have added the camera successfully to your phone Begin to monitor your home.
Step6: In live view interface, click * © “, and then you can set up the camera common functions.

4.Motion Detection Setting

1. After turning it on, you can monitor the human movement who standin front of the device and send alarms.
2. Itis possible to choose different detection sensitivities.
3. Choose different alarm methods.Sound and light alarm is only valid atnight.

5.How to Store Recordings

1. Stored By Manual Go to live video, manually record the video by clicking ‘Record” buton to start or end, existing the live view will automatically stop recording.
2.  Memory Card The camera supports micro SD card(NOT INCLUDED), up to 128GB.
3. Cloud Storage Plan
   It optional to pay for cloud storage.With a cloud subscription, you can record and save all video ciips to the cloud andview them in your CloudEdge APP. You could choose Monthly VIP, Season VIP, or Annual VIP (A newly registered account hasa7-day free trial.)

6.Video Playback

1. Video Playback in SD Card ® Go to the main interface, click”History-Alert”icon, you wil see today’s motion detected events. Tap any of these videos to playback.
   Open the ‘Calendar’ to trace back and playback early recorded videos.

2.  Video Playbackin CloudGo to the main interface, click”Cloud-Alert”icon, you will see today’s motion detected events. Tap any of these videos to playback.
   7.Camera SharingIf you need to view the camera with other family members or friends, you can usethis device sharing function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members only view theliveor playbacks of the device . Note: Please make sure the registered regions of all shared accounts are same with the administrator’s account.

Step 1: Click ‘Device Share’ on setting page.
Step 2: Click ‘Scan QR Code’
Step 3:
Scan the QR code of the sharedaccount and you will receive the confirmation notification after success. The sharing will be completed after you agree. (
Fyou choose ‘enter account, you could search the account you would like to add. )
8.Alarm Management If you need crying detection,click “Alarm Management” and open “Crying Detection’”

Installation Instructions

Installation Method 1: Use the 2 large screws included in the box to fix the bracket to the position where you need to install it.

Installation Method 2: Put the product directly on a clean and flat table.

Installation Method 3: Use the bundled soft bracket in the box to fix the camera where you need it.

Troubleshooting

1.  APP can’t be registered successfully
2.  Please check if the network of the mobile phone is normal; © Please tick the software service agreement and privacypolicy;
3. Please check if the verification code is in the spam mail;
4. Please use WIFI to register if mobile network cannot be registered. If the mobile network and WIFl prompts cannot obtain the server address, please check if other software can be used normally; © During installation, please allow the app to obtain your location and allpermissions, the system will automatically arrange the best server;
5. Ifabove solutions still can’t be effective, we recommend you to uninstall and install the app again, the current location and all permissions are allowed during the installation)

Unable to connect to the network

Unable to connect to Wifi: © Please enable the DHCP of the router; © Please make sure the camera is not in the blacklist in MAC settings of the router; © Tum offthe SGHz wifiin the router (Note: Please contact the. router manufacturer if you can’t tur off the 5Ghz wifi; © After connecting to the 2.4GHz wifi, please check your mobile phone if can access the Intenet; © Make sure the network of your mobile devices are under the same network router of the camera; © Afterthe network is normal, reset the camera and reconnect. Unable to connect to wired © Please enable the DHCP of the router; © Please make sure the camera is not in the blacklist in

MAC settings of the router;

Connect the network cable to your computer firstly, then check the computer and obtain the IP address. If the IP address of the computer is setted by manual, please go to the router and enable the DHCP server to obtain the IP address; After enable the DHCP server, check if the computer can access the Internet normally. (Note: I the computer displays the DHCP mode, then it can get the IP address and access the Internet normally); Connect the network cable to the device and reset the new connection. Wifi password reason Check the WiFi password connected of the camera s same as the WiFi password of the connected router. Check ifthe entered WiFi password has space or special characters(@,#.%8). Disconnected 5Ghz WIF, unable to connect to wifi Turn off the SGhz network and keep the 2.4Ghz network. Disconnect the router and then restart the camera; WiFi name naming cannot have “5Ghz” words.
Camera match the wifi successfully, but can’t hear
the voice of camera
Reset the camera, then power off and reconnect the camera (Because only reset can remove local data ); Put the phone as close as possible to the camera and router whenitis connecting; Please tun off the 5GHz wifi.
No pop-up message for motion detection alarm
Open permission setting in the system settings of mobile device to allow APP to receive message push notification; Some Android phones can not receive the alarm push
information; Please tur on the motion detection in APP; SMS and emal reminders are not supported at this time.

Motion detection messages prompt frequently

If motion detection sen:also can cause alarm; © Reduce sensitivity of alarms (recommended low level).ity is too high, light changes

After inserting SD, it displays damaged

Before inserting the SD card, Disconnect the power. Connect the power to start after plugging in the card; © The SD card must be formatted on the computer before using the SD card; © When choosing SD, please choose genine.

Watch videos with the same camera on differentdevices

The master account can share the video to other account without limit quantity, but the shared accounts only have the rights to watch, snapshot and record video; © The App name and password of the main account also could be logged in on other devices to view the video anduse any function.
The scenarios for the reset key
Reset wifi information. Wiff exception before connecting to the camera wifi password error wifidrop.eeeeereplace new wifi

How to view camera on web browser?

https://web.meari.com.cn/ Choose your location, input your account and password to view it from web browser.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>