TASCAM Portacapture X8 High Resolution Multi Track Handheld Recorder User Guide
- June 9, 2024
- TASCAM
Table of Contents
TASCAM Portacapture X8 High Resolution Multi Track Handheld Recorder
Overview
- Download the latest version of the dedicated software from the TEAC Global Site (https://teac-global.com/).
- Installing the dedicated software will install a driver and a settings application (Portacapture Settings Panel).
CAUTION
- Before starting to install software, quit other applications.
- With a Mac, the standard OS driver will be used, so there is no need to install any software.
Before using this software, read the Software Use License Agreement and agree to its terms.
Trademarks
- ASCAM is a registered trademark of TEAC Corporation.
- Microsoft, Windows and Windows Meida are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
- Apple and Mac are trademarks of Apple Inc.
- ASIO is a trademark and software of Steinberg Media Technologies GmbH.
- Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners.
System requirements
Check the TASCAM website (https://tascam.com/) for the latest information
about supported operating systems.
Supported operating systems
- Windows 11 64-bit
- Windows 10 64-bit
Computer hardware requirements
- Windows computer with a USB2.0 or USB 3.0 port
- Operation is not guaranteed using the TASCAM driver with ARM64 CPUs.
CAUTION
Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating conditions.
Installing the Windows dedicated software
Follow the procedures below to install the Windows dedicated software.
CAUTION
- Complete installation of the Windows dedicated software on the computer before connecting a Portacapture X6 or Portacapture X8 to it with a USB cable.
- If a Portacapture X6 or Portacapture X8 is accidentally connected to the computer with a USB cable before the dedicated Windows software is installed and the “Found New Hardware Wizard” launches, close the wizard and disconnect the USB cable.
Windows dedicated software installation procedures
-
Download the latest Windows dedicated software from the TEAC Global Site (https://teac-global.com/) and save it on the computer to be used with the unit.
-
ncompress the saved software (zip file) on the computer desktop or another location.
-
ouble-click the “TASCAM_Portacapture_Installer_x.xx.exe” file in the folder that appears after uncompression to launch the installation software.
CAUTION
If you open a zip file without decompressing it and doubleclick the “TASCAM_Portacapture_Installer_x.xx.exe” file in the folder that opens, installation will not start. Right-click the zip file and select “Extract All”, for example, to decompress it and then try again. -
When a Security Warning or User Account Control screen appears, click the “Yes” button.
-
Read the contents of the User License Agreement, and select “I accept the agreement” if you agree to the terms. Then, click the “Next” button.
-
Next, click the “Install” button.
-
The following screen appears when installation has completed. Click the “Finish” button.
The installer will quit and the Windows Settings Panel will launch.
NOTE
The first time you connect the unit by USB to the computer after installing
the software, installation of the device driver will be executed. Some time
might be necessary before the unit is recognized because Windows Update will
be automatically searched at this time. If the unit is still not recognized
after a while, open the software installation screen from the notification
area at the bottom right of the computer display, and click “Skip obtaining
driver software from Windows Update” to stop the search.
Uninstalling the Windows dedicated software
NOTE
Normally, there is no need to uninstall the dedicated software. Follow these
procedures if a problem occurs or you no longer intend to use the unit with
the computer.
- Open the “Uninstall or change a program” screen using the procedures for the operating system being used (Windows 10).
- Select “TASCAM Portacapture Series x.xx” from the list, and double-click it.
- Then, follow the instructions that appear on the screen.
Opening the settings application
Follow the procedures below to open the settings application.
- From the “Start” menu select “Portacapture Settings Panel” under “TASCAM”.
Settings application overview
Input latency
You can adjust the input latency of audio input and output signals transferred
between the unit and the computer. Smaller values result in less audio signal
delay, but require high-speed processing by the computer. f the processing
cannot keep up, for example, due to other system operations, clicking and
popping noises might occur and the audio signal might even drop out.
Increasing the value will stabilize operation and suppress negative effects on
audio signals, but the delay in audio signal transfer between the unit and the
computer will increase. You can adjust the amount of latency for this unit
according to your use conditions.
Setting Sound Properties
- Open the “Sound” screen using the procedures for the operating system being used (Windows 10).
- On the “Playback” page, right-click “Portacapture X6” or “Portacapture X8” and click “Set as Default Device” in the pop-up menu that appears.
When you do this, the green check mark appears next to the selected device.
NOTE
Set the default device according to the ASIO device being used on the
”Recording” tab in the same manner as on the ”Playback” tab.
After completing the setting, click the ”OK” button.
NOTE
- you change the setting while Windows Media Player is running, the software will not recognize that the device has been changed. In this case, restart Windows Media Player.
- if you still cannot hear sound after making the settings and completing the procedures above, restart the computer.
- If you make this setting, sound will be output through this unit, but no sound will be output from the computer’s speakers or headphone jack.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>