TASCAM DR-22WL Handheld Recorder with Wifi Functionality User Manual
- June 3, 2024
- TASCAM
Table of Contents
- TASCAM DR-22WL Handheld Recorder with Wifi Functionality
- Remote Wi-Fi operation eliminates handling noise
- Built-in X-Y cardioid stereo mies enable high-quality audio recording
- Large LCD and scene dial make the interface simple and easy to understand
- Overdubbing and reverb can be used
- Smartphone can be used with unit to send recorded files
- Multiple automatic features allow simplified operation
- Other convenient features
- Features at a glance
- Supported Operating Systems
- Options
- Related products
- Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TASCAM DR-22WL Handheld Recorder with Wifi Functionality
Remote Wi-Fi operation eliminates handling noise
TASCAM has once again revolutionized handheld recording! The DR-22WL creates
its own Wi-Fi network, and a free dedicated app can be used for remote
operation without touching the unit. Since the Wi-Fi transmission range is
about 20m/65 feet, this feature can be used with the recorder in places that
are normally out of reach. Not only does the app allow recording to be started
and stopped, it can also be used to check and adjust input levels from an iOS
or Android device. Everything related to recording can be done by Wi-Fi.
In addition, audio can be checked by Wi-Fi after recording. The audio quality
can be checked through headphones connected to a smartphone. With operation
capabilities and flexibility that exceeds infrared remotes – and reliability
that approaches that of wired remotes – this hand held recorder allows freedom
of placement that far surpasses that of previous models.
Starting with firmware version 2.0 it is also possible to connect via an
existing router or access point. Advantages are that (1) you can use other web
services like e-mail or sharing portals at the same time with your mobile
device, and (2) Wi-Fi range thus control range might be larger, depending on
the router capabilities. A direct connection, in contrast, is ideal when there
is no WiFi available or you don’t have permission to use it.
Note: Checking audio via Wi-Fi is intended for use after recording.
- Choose which type of Wi-Fi connection to use: Simple direct connection (no router necessary) or connection via an existing Wi-Fi network (local router or access point)
- Remote control using the free DR CONTROL app (iOS/Android)
- Check recorded audio using wireless playback
Built-in X-Y cardioid stereo mies enable high-quality audio recording
Two unidirectional mic units are utilized together for stereo recording in an
X-Y format. They are arranged so that their diaphragms overlap in the same
axis. X-Y format recording can capture sound with a good stereo image and no
sense of emptiness at the center. Since the mic units will not distort even at
high volumes, recording with a great sense of nearness is possible even in
high-volume situations.
In addition, a shock mount structure is used to hold the mic capsules. This
absorbs vibrations effectively even when mounted on a digital SLR camera.
- Cardioid condenser mies in an X-Y configuration for impeccable stereo recordings
- Designed to handle high sound pressures of up to 120 dB
- Low noise realized through the use of high-performance audio codec
Large LCD and scene dial make the interface simple and easy to understand
Two unidirectional mic units are utilized together for stereo recording in an
X-Y format. They are arranged so that their diaphragms overlap in the same
axis. X-Y format recording can capture sound with a good stereo image and no
sense of emptiness at the center. Since the mic units will not distort even at
high volumes, recording with a great sense of nearness is possible even in
high-volume situations.
In addition, a shock mount structure is used to hold the mic capsules. This
absorbs vibrations effectively even when mounted on a digital SLR camera.
- Scene dial allows instant recall of settings suitable for different scenes
- Large 128×128 LCD and 4 function keys enable simple operation
- Input level adjustment dial designed for usability
Overdubbing and reverb can be used
In addition to recording, this unit also has functions that can be used for
music creation. The overdubbing function allows new sounds to be layered over
existing recordings. This can be used to add solo parts to karaoke and to
create harmonies by recording the same instrument multiple times.
By using the reverb effect, users can create sounds that are even more
appealing using just the DR-22WL.
Smartphone can be used with unit to send recorded files
The benefits of Wi-Fi are not limited to recording. Audio files can be
transmitted via Wi-Fi to smartphones and computers. They can also be uploaded
to SoundCloud using a dedicated application. SoundCloud is tightly linked with
other social networking services. For example, if a recording is shared to
Facebook, it will appear on the user’s timeline. By uploading a live recording
immediately after performance, audience members could listen to the concert
again on their way home.
Note: An Internet connection is necessary to upload files to the Internet from
a smartphone.
- Dual-format recording function allows simultaneous recording of both WAV and MP3 files
- Share audio files from SoundCloud to other social networking services
- Transfer files to computers wirelessly
Multiple automatic features allow simplified operation
Even though the DR-22WL is a professional recording device, it also has numerous automatic functions that make capturing high-quality recordings easy for anyone. In addition to automatic recording functions, the unit also has functions that simplify file management. Users can create high-quality recordings without complicated operations.
- Automatic level optimization functions (peak reduction and limiter)
- Automatic track incrementation functions (new file creation) can be set according to the application
- Automatic recording function that starts recording when a preset audio input level is detected
- Automatic mark function that adds marks according to set conditions
- Automatic division function that divides files at pre set marks (V1.10)
Over-level peaks can be marked automatically
The new Peak Mark function automatically places a mark two seconds before a
detected peak (PEAK LED) during recording, which is useful for post-recording
confirmation. When there are no problems found after confirmation, the mark
can be deleted. In the BWF format (in the same way as with other types of
marks) the peak mark can be utilized in corresponding DAWs. To avoid multiple
marks for the same overload event, new marks are only set 10 seconds after the
previous peak mark.
Other convenient features
Recording settings and GPS information can be saved with BWF files
A major improvement since firmware version 1.2 is the XRI (extended Recording
Information) feature that can be used with BWF format recordings. It stores
the recording settings after each recording and allows the user to identify
the recorder as well as the settings used for a certain recording. In
addition, a smartphone’s GPS information can be embedded while connected to
the recorder via Wi-Fi and using the DR CONTROL app. Storing GPS data is
useful when working in multiple locations, e.g. when making outdoor sound-
gathering recordings. XRI information can be displayed on the main unit, on
the DR CONTROL app or on other XRl-compatible models and applications.
Protection for important files
The new Protect function prevents important recorded files from being
mistakenly deleted by operating the main unit. Protection can be switched on
or off for each recording file individually.
Features at a glance
Key features
- Supported WAV recording formats: 44.1/48/96 kHz, 16/24 bits, WAV/BWF format
- Supported MP3 recording format: 44.1/48 kHz, 32-320 kbps MP3
- Scene dial for instant setup of common recording applications
- Wi-Fi connection supports monitoring, transport control, level control, file transfer and more
- Easy Wi-Fi direct connection with Android/iOS or through an existing router or access point
- Dedicated Wi-Fi file transfer application for Windows/Mac available
Recording hardware
- Unidirectional (cardioid) condenser microphones in X-Y configuration
- Can handle high sound pressure levels up to 120 dB SPL
- Improved microphone preamps for higher-quality audio
- Cirrus Logic AD/DA codec for low-noise, high-performance audio recording and low power consumption
- Recording media: SD/SDHC/SDXC card (up to 128GB SDXC card)
Recording functions
- Dual format recording function (WAV and MP3)
- Four-position low-cut filter (40/80/120/220 Hz)
- Peak-reduction function automatically sets the optimal level when peaks are detected in music recordings
- Limiter for overload protection
- Auto-recording function to automatically start recording based on input level
- Pre-recording function that can record up to 2 seconds prior to actual record start
- Self-timer recording function
- Mark function (manual or automatic by peak or by time)
- Information on the recording settings used and the current GPS position derived from a connected smartphone can be embedded in BWF files
Playback functions
- Variable Speed Audition (VSA) is ideal for practice and arrangement (50-150% change of speed)
- Key changing function with fine-tuning (±6 halftones)
- 1-0 loop playback function – ideal for rehearsal
- Resume function retains the last stop position when power is turned back on
- Audio files created on computer can be played back (only in formats compatible with this product)
Editing functions
- Divide function (manual or automatic by markers)
- Track division function creates new files during recording (manual or automatic by time or by level)
- Files and empty folders can be deleted
- Reverb effect for acoustic instruments and vocals
- Automatic power-saving function that prevents unnecessary use of battery power
- Metronome for rehearsal
- File name format can be set to use a user-defined word or date
- Long-time operation of over 17 hours using the internal batteries
- Stereo-mini headphones/line output with 20 mW output power per channel
- 128×128 graphic LCD with backlight
- Screw hole for tripod attachment
- USB 2.0 high-speed file transfer to/from computer
- Included accessories: SD card, 2 AA batteries, micro USB cable
- Powered by two AA batteries, optional AC adapter or USB bus power
- Reverb effect for acoustic instruments and vocals
- Automatic power-saving function that prevents unnecessary use of battery power
- Metronome for rehearsal
- File name format can be set to use a user-defined word or date
- Long-time operation of over 17 hours using the internal batteries
- Stereo-mini headphones/line output with 20 mW output power per channel
- 128×128 graphic LCD with backlight
- Screw hole for tripod attachment
- USB 2.0 high-speed file transfer to/from computer
- Included accessories: SD card, 2 AA batteries, micro USB cable
- Powered by two AA batteries, optional AC adapter or USB bus power
Supported Operating Systems
Windows
- Windows 10 (May 2020, version 2004)
- Windows 8.1
- Windows 7
Mac
- macOS Catalina (10.15)
- macOS Mojave (10.14)
- macOS High Sierra (10.13)
Options
AK-DR11: Accessory Pack for DR Series Audio Recorders
DR Control: Remote app for DR-series recorders
TM-10L: Lavalier Microphone With Screw-Lock Connector
PS-P520U: 5-Volt AC Adapter
Related products
DR-OSX: Stereo Handheld Audio Recorder and USB Audio Interface
DR-07X: Stereo Handheld Audio Recorder and USB Audio Interface
Specifications
General
-
Recording media
- microSD card (64 MB – 2 GB)
microSDHC card (4-32 GB)
microSDXC card (64-128 GB)
- microSD card (64 MB – 2 GB)
-
Recording/playback formats
- BWF: 44.1k/48k/96kHz, 16/24 bit
WAV: 44.1k/48k/96kHz, 16/24 bit
MP3: 44.1k/48 kHz, 32/64/96/128/192/256/320 Kbit/s
- BWF: 44.1k/48k/96kHz, 16/24 bit
-
Number of channels 2 channels (stereo)
Analogue audio inputs and outputs
- MIC/EXT IN jack (can provide plug-in power)
- Input impedance 3.5-mm stereo mini jack
- Reference input level 25 kO
- Maximum input level – 4 dBV
- Phones/LINE OUT jack
- Output impedance 3.5-mm stereo mini jack 12 n
- Reference output level -14 dBV (at 10 kO load)
- Maximum output level 20 mW + 20 mW (at 32 n load)
Approximate battery operation time (continuous operation)
-
WAV, 96kHz, 24bit
- About 9 hours
(Recording with built-in microphone)
- About 9 hours
-
WAV, 44.1kHz, 16bit
- About 17.5 hours
(Recording with built-in microphone)
- About 17.5 hours
-
MP3 format, 44.1kHz, 128kbps
- About 12 hours
(Recording with built-in microphone)
- About 12 hours
-
MP3 format, 48kHz, 320kbps
- About 11 hours
(Recording with built-in microphone)
- About 11 hours
-
WAV, 96kHz, 24bit
- About 11 hours
(Playback using headphones)
- About 11 hours
References
- Tascam AK-DR11 | Accessory Pack for DR Series Audio Recorders
- Tascam BP-6AA | Battery pack
- Tascam DR Control | Remote app for DR-series recorders
- Tascam DR Control | Remote app for DR-series recorders
- Tascam DR-05X | Stereo Handheld Audio Recorder and USB Audio Interface
- Tascam DR-07X | Stereo Handheld Audio Recorder and USB Audio Interface
- Tascam PS-P520U | 5-Volt AC Adapter
- Tascam PS-P520U | 5-Volt AC Adapter
- Tascam TM-10L | Lavalier Microphone With Screw-Lock Connector
- tascam.eu/pics/dr-22wl.jpg