hama 00053686 4 Way Charging Station for Nintendo Switch Joy Con Instruction Manual

hama 00053686 4 Way Charging Station for Nintendo Switch Joy Con

Controls and displays

1. A) Charging contact for Nintendo Joy-Con 1
2. B ) Charging contact for Nintendo Joy-Con 2
3. C ) Charging contact for Nintendo Joy-Con 3
4. D ) Charging contact for Nintendo Joy-Con 4

Thank you for choosing a Hama product! Take your time and read the following instructions and information completely. Please keep these operating instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package contents

• 1x charging station for Nintendo Switch Joy-Con
• 1x USB-A – USB-C cable
• These operating instructions

Safety instructions

• The product is intended for private, noncommercial use only.
• Use the product only for the intended purpose.
• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Route all cables so that there is no risk of tripping.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any major shocks.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Children should be supervised to ensure that they do not play with the product.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.

Warning – charging station

• Do not continue to operate the product if it is visibly damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Note

• Only charge Original Nintendo Switch Joy-Cons with the four charging contacts
• Remove the device from the charging station once charging is complete.
• When inserting the devices, take care to ensure that the corresponding sockets and plugs match perfectly to avoid possible damage.
• Only use suitable chargers or USB connections for charging.

Start-up and operation

Connecting the charging station and devices

• Connect the USB cable to a suitable USB socket
• Connect the USB-C plug to the USB-C socket on the charging station.
• Plug your Nintendo Joy-Con into the charging contact(s) (A/B/C/D) on the charging station
• When charging is active, the LED display on the charging station lights up red.
• The charging process is finished once the controller LED display lights up green.

Note
If the power consumption of all connected devices exceeds the maximum power (see 7. Technical data) of the product, the devices may charge more slowly or not at all.

Warranty disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation, mounting and improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-115 (German/ English) Further support information can be found here: www.hama.com

Technical data

Charging Station IN / OUT 5.0 V 850mA

Hama GmbH & Co KG 86652 Monheim/Germany

Service & Support
www.hama.com +49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>