DEWENWILS Wireless Light Switch Remote Control Outlet User Guide
- June 9, 2024
- dewenwils
Table of Contents
DEWENWILS Wireless Light Switch Remote Control Outlet
Specification
- Brand DEWENWILS
- Input Voltage 125VAC 60HZ
- Max. Current 15A Resistive; 5A Tungsten Lamp; 1/3 HP
- Max. Load Power 1875W
- Transmission Frequency 433.92MHZ
- Remote Battery 23A, 12V
- Remote Control Range 100 Feet (Free Area)
- Operation Mode ON-OFF-ON
- Current Rating 15 Amps
- Operating Voltage 125 Volts (AC)
- Contact Type Plugin
- Switch Style Push Button
- Terminal Through Hole
- Material Copper
What’s In the Box
- AC Grounded Outlet Switch
- Wireless Wall Switch
- Battery (Installed)
Introduction
DEWENWILS has maintained scientific rigor to produce highly useful, practical, and aesthetically pleasing items. Our products span from Timer Series, Outlet Switches, and Light Sockets to Extension Wires, Lamps, and Consumer Electronics, with a focus on Tools and Home Improvement, Consumer Electronics, and Outdoor Equipment. Since 2016, our goods have gained popularity over the world, providing you with fresh energy and intuitive convenience.
Saves Space
Expandable and Programmable
Create your own remote-controlled lighting setups at will.
But, you are free to add additional Dewenwils remote controls, plugs, and light sockets (Same Model Only) to expand your remote system or alter the combinations after the remote controller and receiver have been pre- programmed.
Remote That is Detachable And Easy to Install
Dimension
Product Description
Using a wall-mounted remote control to remotely manage home appliances or interior lighting can simplify your life. It is also possible to manually turn on and off the wireless receiver equipment. Ideal for hard-to-reach switches, plug-in pendant lights, lamps, ceiling lighting, fans, Christmas trees, and other electrical accessories.
3 Prong Side Outlet Plug that Saves Room
Receivers that plug electrical devices in from the side can easily fit in
small places or behind furniture.
enables furniture to be pushed up against a wall, which is perfect for
cramming into small spaces behind furniture like a sofa, nightstand, or
headboard. One bottom wall socket is required for small size.
Create a Bespoke RF Remote System
Permit adding additional handheld remote controls, plugs, and light sockets
(The same model from Dewenwils only).
Increase the freedom to expand your remote system.
Note: Before using the wall switch, please remove the battery insulation.
100 feet in open space for remote control range
A powerful RF signal can pass through doors and walls. No line of sight is
necessary between the plug-in receiver and the remote control. The wireless
range may be somewhat shorter than 100 feet in actual use due to electronic
gadgets, walls, and other physical obstructions.
Make Your Life More Comfortable and Simple
Making your life convenient, safe, and energy-efficient is ideal for the
elderly, pregnant women, those with restricted mobility, and people who suffer
from back discomfort. Eliminate Unstable and Troublesome WIFI Control Switches
There is no complicated setup required, and WIFI signal strength is
unimportant.
Features
-
Wall switch wireless
Wall mounted wireless on/off switch suits any room’s décor effortlessly; mounting bracket provided; easy installation; add wall light switches without rewiring; More versatility is offered with a detachable remote switch; both ETL and FCC approved -
RF Wireless Remote Range of 100 Feet
Powerful RF signal has a 100-foot range in open spaces and can pass through walls and doors without causing any interference. It also doesn’t need to be in line of sight between the remote control and the outlet plug to turn it on or off. -
Heavy Duty High Power 15A/1875W
Ideal for indoor lighting fixtures, Christmas tree lights, lamps, fans, hard- to-reach outlets, and other electrical devices; high power rating of up to 15A/1875 watts, 1/3HP; compatible with most home appliances. -
Small size and a side outlet
only requires one wall outlet socket; smaller than the majority of other indoor remote control outlets; convenient side plug receiver is small enough to fit behind furniture and in tight areas; ETL certification and FCC acceptance
FAQs
What is the difference between single-channel and multi-channel remote controls?****
The single-channel remote control can control one outlet, while the multi- channel remote control can control multiple outlets.
How do I set up my remote control?****
Please refer to the user manual for detailed instructions.
How far away from the outlet can I place my remote control?****
The range of our remote control is about 100 feet in open area. However, it may vary depending on your environment.
What is the battery life of the remote control?****
The battery life depends on how often you use your remote. If you use it daily, expect it to last for a year or more; if you use it sparingly, it may last for several years
How does a remote wireless light switch work?****
A high-tech alternative to lighting a room in your house is a wireless switch. A receiver implanted in the light source receives a signal from a transmitter embedded in the light switch instructing it when to turn on and off.
How does a remote control switch work?****
These switches use radio frequency to communicate with a transmitter. The transmitter is a tiny battery-operated wireless remote. The junction box of your light switch would benefit most from having a receiver linked to it as well. This switch doesn’t require you to replace your light bulbs.
Is there a way to control a light switch remotely?****
Since they are designed to replace your existing light switches, remote control light switches provide you the ability to operate them from a distance using an app on your smartphone after connecting to your wifi network.
Do wireless light switches have batteries?****
The wireless switch is then mounted on the wall. With merely a push of a button, the switch activates or deactivates the light by transmitting a wireless signal to this antenna.
Do smart light switches work without Wi-Fi?****
Even if your home network is down, smart switches for lights will still work. Although they won’t have any high-tech features, you can still use them to turn on and off the lights like you would a regular light switch.
How do I connect a wireless light switch?****
Set the discovery mode on your smart switch. Your mobile device must be connected to the smart switch. Use the mobile device to connect your smart switch to your wireless internet.
Why does my smart light switch turn on then off?****
If your Smartwave light switch sometimes goes ON and OFF, make sure the timer settings are set up properly. Try reconfiguring the timing settings if they are already set up correctly.