ZEISS DTI 6-20 Digital Thermal Imaging Camera User Manual

: June 9, 2024
: Zeiss

Table of Contents

ZEISS DTI 6-20 Digital Thermal Imaging Camera
SAFETY AND REGULATORY INFORMATION
Regulatory information for USA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEISS DTI 6-20 Digital Thermal Imaging Camera

SAFETY AND REGULATORY INFORMATION

Safety instructions for handling

Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.
Avoid touching the metal surface (cooling fins) after exposure to sunlight or cold.
The protection classes IPX5 and IPX7 are only achieved when all rubber covers are firmly closed.
Take breaks after longer periods of use to avoid wrist pain.

Danger of swallowing

Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed.

Safety instructions for battery

Handle the device with care: rough handling can damage the internal battery.
Do not subject the battery to impacts, blows, etc., do not crush it or drop it.
Keep metal objects away from the battery terminals. It may cause a short circuit.
Do not touch damaged or leaking Lithium-ion batteries.
Stop using the battery and disconnect it from the power supply if it smells strange, emits smoke, deforms, shows any other visible damage or exhibits unexpected behavior. Continued use may result in injuries.
Only replace the battery with the same battery type.
Do not expose the device or the battery to fire or high temperatures above 60°C.
We recommend charging the battery only at ambient temperatures between 10°C to 45°C.
The battery capacity decreases when operated in a cold ambient temperature. This is not a fault and occurs for technical reasons.
Do not store the device for long periods at temperatures below 0°C or above 35°C. This permanently reduces the capacity of the battery.
Dispose of used batteries as explained below.

Safety instructions for the power supply unit

Check the power supply unit and cable for visible damage before use.
Do not use defective parts and observe the safety instructions for your power supply unit.

For further information, please refer to the user manual and Quick Guide provided. Both are available on our website in the download center: www.zeiss.com/hunting/downloads

Intended use
The device is intended for displaying heat signatures during nature observation, remote hunting observations and for civil use. This device is not a toy for children. Use the system only as described in this instruction manual. The manufacturer and the dealer accept no liability for damage which arise due to non-intended or incorrect use.

Legal and regulatory information
Frequency range of WLAN radio module: 2,400–2,473 MHz Maximum power of WLAN radio module: 6.3 mW Frequency range of Bluetooth LE radio module: 2,402–2,480 MHz Maximum power of Bluetooth LE radio module: 1.47 mW Carl Zeiss AG hereby declares that the radio equipment types ZEISS DTI 6/20 and DTI 6/40 comply with the directives 2014/53/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: www.zeiss.com/cop/conformity The limits of electromagnetic compatibility have been complied with and certified for the enclosed USB cable. It is not possible to provide reliable information regarding other cables. The latest safety instructions and regulatory information can be found at: www.zeiss.com/cop/downloads Some certification marks for standards supported by the ZEISS DTI 6 can be displayed on the screen of the ZEISS DTI 6. Select “Settings” in the main menu. Then navigate to “Information”.

Disposal of batteries
In the European Union, this symbol indicates that the battery used in this product may not be disposed of in domestic waste and must be collected for disposal separately. When returning used batteries, please use a collection system that may exist in your country. The materials and substances in the batteries may have a detrimental impact on health and the environment. By depositing empty batteries at a recycling facility, you are contributing to the protection, maintenance, and improvement of the quality of our environment. Please only return discharged batteries. Due to the risk of short circuits, please cover the poles of the battery with tape. The battery used does not contain mercury, cadmium or lead in quantities exceeding the limits defined in Directive 2006/66/EC.

User information on the disposal of electrical and electronic devices (private households)
The WEEE symbol on products and/or accompanying documents indicates that used electrical and electronic products must not be mixed with ordinary household waste. For proper treatment, recovery and recycling, take these products to the appropriate collection points where they will be accepted without charge. In somecountries, it may also be possible to return these products to your local retailer when you purchase a corresponding new product. The proper disposal of this product serves to protect the environment and prevents possible harmful effects on human beings and their surroundings, which may arise as a result of incorrect handling of waste. More detailed information on your nearest collection point is available from your local authority. In accordance with state legislation, penalties may be imposed for the improper disposal of this type of waste. Please note that it is your own responsibility to delete personal data before disposing of the device.

For business customers within the European Union
Please contact your dealer or supplier regarding the disposal of electrical and electronic devices. They will provide you with further information.

Information on disposal in other countries outside of the European Union
This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option.

Regulatory information for USA

Contains FCC ID: 2AMSP-DTI6

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

NOTE: To assure continued compliance, use the included interface cable with ferrite core when connecting to computer or peripheral devices. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Name of Responsible Party
Carl Zeiss SBE, LLC / Consumer Products ZEISS Group One North Broadway, Suite 1501 White Plains, NY, 10601 USA Phone +1 800 858 6745 We, Carl Zeiss Inc., hereby declare that this product was tested conforming to the applicable FCC rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the Commission’s requirements.

Regulatory information for Canada

Contains IC: 22938-DTI6 Manufacturer’s self-declaration of compliance with IED’s ICES standard:\ CAN ICES-3 (B)/NMB-3(B)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

NOTE: To assure continued compliance, use the included interface cable with ferrite core when connecting to a computer or peripheral devices. This device complies with ISED RF radiation exposure limits set forth for an uncontrolled environment.

This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). Contains IC: 22938-DTI6

Carl Zeiss AG