MAXIM LIGHTING 32364 Huntington 4 LT Chandelier Instruction Manual
- June 9, 2024
- MAXIM LIGHTING
Table of Contents
PRODUCT NAME: Huntington 4 LT Chandelier
ITEM NUMBER: 32364
32364 Huntington 4 LT Chandelier
Please consult a qualified electrician for hanging fixture and wiring.
Light Source : 4 X E26 Medium Base 60W (Not Included)
Made in China
Before Getting Started
– Read the instructions carefully prior to assembling the product.
– When you open the package with a sharp tool like acuter knife, be careful
not to damage the components inside.
– Carefully remove all packaging materials and retain for future use.
– Keep all hardware parts and packaging out of reach of small children.
– Choose a clean, level, spacious assembly area.
– Avoid hard surfaces that may damage the product.
– Ensure that you have all required contents for complete assembly.
– Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
– Do not over tighten the screws and bolts as this may damage the threads.
– Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
– Carefully read through the instruction sheet before assembly and using the
product.
– Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
– Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
– Only use there commended bulb type and do not exceed the maximum wattage sit
could cause fire.
– Do not plug the product inifcord is torn or frayed.
Cleaning & Maintenance
– On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
– For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
– Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
– Periodically (every 90 days) make sure that the screws are fully tightened.
– Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting, started, ensure the package contains the following components:
| A | GLASS | x4 |
|---|---|---|
| B | FIXTURE | x1 |
| C | Socket Ring | x4 |
| D | CANOPY | x1 |
| E | SCREW COLLAR LOOP | x1 |
| F | CHAINS | x1 |
| G | MOUNTING BRACKET | x1 |
| H | SCREW | x2 |
| RED HAT | x3 |
Attach appropriate amount of chain to loop to achieve desired mounting height. Thread wire through every 3rd loop of chain. Remove ring from loop and slide down chain. Place canopy onto chain and let slide to top of fixture. Install nipple and cross bar into top of chain loop.