MAXIM LIGHTING 32361 Huntington 1-Light Wall Sconce Instruction Manual
- June 9, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 32361 Huntington 1-Light Wall Sconce
Please consult a qualified electrician for hanging fixtures and wiring.
Light Source : 1 X E26 Medium Base 60W ( Not Included )
Made in China
PRODUCT NAME: Huntington 1-Light Wall Sconce
ITEM NUMBER: 32361
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain them for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all the required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over-tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation! Keep any packaging materials away from
children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
Caution thereisariskofshock. Disconnect from the power source before
assembling or cleaning.
Switch off, unplug, and allow the bulb to cool before replacing the bulb or
cleaning it.
Only use the recommended bulb type and do not exceed the maximum wattage that
could cause a fire.
Do not plug the product inifcord is torn or frayed.
For outdoor use, caulk around the fixture with silicone sealant to prevent
water intrusion.
Cleaning & Maintenance
Apply high-quality car wax to the fixture regularly to protect it from environmental factors that can damage the metal.
Clean with a soft cloth and mild detergent. Do not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting, and scorching,
or even cause the color to fade.
Contents
Before getting, started, ensure the package contains the following components
INSTALLATION
