UGREEN SM493 AC1300 High-Gain Dual-Band Wireless Adaptor User Manual
- June 9, 2024
- UGREEN
Table of Contents
UGREEN SM493 AC1300 High-Gain Dual-Band Wireless Adaptor
Product Overview
Package Contents
How to Use
How to Use (Take Windows 10 as an Example)
Step 1. Driver Installation
-
Plug the device into the USB port of your PC.
-
Insert CD into the CD drive of your PC.
Note: If the CD-ROM is unavailable in your computer, please go to UGREEN official website, click on “Support”> “Download” and search 50341 (Product number) to download the corresponding driver. -
Double click Setup.exe and run it, then follow up the steps to finish the installation.
Tip: If the popup window doesn’t show up, please select “This PC” and
double click “Ugreen Wireless icon.
Note:
“This PC may have different names on different Windows systems: Windows 8.1/10
“This PC”, Windows XP “My Computer”, Windows Vista to Windows8 “Computer”
Step 2. Connect Your Wi-Fi
- Click on the lower right corner of your PC device.
- Select your WiFi name and enter password to proceed.
- Once you have finished all steps, you’ll be able to use the wireless network.
Specifications
Notes
- Do not leave the product in the moist environment.
- Do not forcibly plug or unplug the product in case of connector damage
- Keep out of reach of children.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must aCCen unuesieEupea
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
Bdigital device, pursuant to Part 15 of the FCC Rules. Ihese limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Ihis equipmentgenerates uses and can radiate radio
frequency energy and, it not installed and used in accordance with the
instructions, may cause harmful interterence to radio communications. However,
there iIs no guarantee that interterence will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try tO correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation betvween the equipment and recenver
- Connect the equipment into an outlet on a circuit difterent from that to which tne receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
NOTE: The manutacturer is not responsible for any radio or TV interterence caused by unauthorized modifications or changes to this equipment.such modifications or changes could void the user’s authority to operate the equipment.
RF warning statement
- This device comply with FCC SAR requirements. The highest reported lg-SAR for body is 0.55W/kg, the SAR limit is 1.6 W/kg averaged over 1g of tissue.
- Body-worn octed for typical Douyration distance of ecories that do
- Body-worn Operation his device was tested Tor typical body-Worn operations. Io comply with RF between the users body, including the antenna.tody-wom accessories that do not meet these requirements may not comply with Kh exposure requirements drid sfioud De avoded. Use Ony tne suppued of drl dpproved dnteriid.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the follwing two conditions:
- this device may not cause interterence, and
- this device must accept any interference, including interference that may cause undesired operation of the device
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This device has been tested for compliance with SAR values at typical body-
worn operation. To ensure that RF exposure levels are below tested levels, use
accessories with this equipment to maintain a minimum separatior distance of
5mm between the user’s body and the device. The highest SAR value reported
during product certification for use when properly worn on the body is
0.7OW/kg.
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased trom UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.
- Product name: AC1300 High-Gain Dual-Band Wireless Adapter
- Product model: CM493
- Manutacturer: Ugreen Group Limited
- Operation frequency(Max power): 2.4G WiFi: 2412-2472MHz(17dBm);
- 5G WiFi: 5150-5350MHz(17dBm); 5725-5875MHz (14dBm)
- Operating lemperature: 0°C-40°C
The device for operation in the Band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
This product can be used across EU member states.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, Ugreen Group Limited declares that radio equipment type CM493 is in
compliance with Directive 2014/53/EU, and this product is allowed to be used
in all EU member states.
The full text of the EU declaration of conformity is available at following
company website: https://www.ugreen.com/download/
SIMPLIFIED GB DECLARATION OF CONFORMITY
Hereby, Ugreen Group Limited declares that radio equipment type CM493 is in
compliance with Directive UK Radio Equipment Regulations (SI 2017 No.1206),
and this product to be used in all UKThe full text of the UK declaration of
conformity is available at following company website:
https://www.ugreen.com/download/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>