weber 51779 Smoke Fire Wood Pellet Grill Owner’s Manual
- June 9, 2024
- Weber
Table of Contents
51779 Smoke Fire Wood Pellet Grill
EX4 EX6
Wood Pellet Grill
OWNER’S MANUAL
A MAJOR CAUSE OF FIRES IS FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF UTMOST IMPORTANCE THAT THIS PRODUCT BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
51779
US 06/06/20
SAFETY
READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING THE APPLIANCE. This Owner’s
Guide contains important product dangers, warnings, and cautions. Please read
this entire manual before assembly and use of this pellet fuel-burning
appliance. Failure to follow these instructions could result in property
damage, bodily injury or even death. Contact local building or fire officials
about restrictions and installation inspection requirements in your area. For
assembly instructions, refer to the Assembly Guide. SAVE THESE INSTRUCTIONS.
Visit weber.com, select your country of origin, and register your grill today.
DANGER, WARNING, and CAUTION statements are used throughout this manual to
emphasize critical and important information. The statements are defined as:
m DANGER!: Indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
m WARNING!: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
m CAUTION!: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
m DANGER! Keep flammable vapors and liquids away from the grill. Never use
gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or
similar liquids to start or ‘freshen up’ a fire in this appliance. Keep all
such liquids well away from the appliance when in use.
m WARNING! For outdoor use only. The installation of the pellet grill shall be
located so flue gases including smoke will not communicate or enter any
building. Consult with the local fire or building codes for additional
requirements.
m WARNING! Creosote Formation and need for removal. When wood pellets are
burned slowly, they produce tar and other organic vapors that combine with
expelled moisture to form creosote. When ignited, this creosote makes an
extremely hot fire.
m WARNING! The ash and grease system and cookbox should be inspected before
each cook to determine when grease and/or creosote buildup has occurred. When
grease or creosote has accumulated, it should be removed to reduce the risk of
fire.
m WARNING! Disposal of ashes – Always wait for the grill to completely cool
after proper shutdown. Do not dispose of any grease or ash until they are
fully cooled.
m WARNING! Use only WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS in this
grill. Do not use pellet fuel labeled as having additives.
m WARNING! Remove pots and pans while the operating appliance is unattended,
to reduce the risk of fire.
m CAUTION! Do not use accessories not specified for use with this appliance.
m WARNING! Follow these guidelines to prevent carbon monoxide, a colorless,
odorless gas from poisoning you, your family or others.
· Know the symptoms of carbon monoxide poisoning: headache, dizziness,
weakness, nausea, vomiting, sleepiness, and confusion. Carbon monoxide reduces
the blood’s ability to carry oxygen. Low blood oxygen levels can result in
loss of consciousness and death.
· See a doctor if you or others develop cold or flu like symptoms while
cooking or in the vicinity of this appliance. Carbon monoxide poisoning, which
can easily be mistaken for a cold or flu, is often detected too late.
· Alcohol consumption and drug use increase the effects of carbon monoxide
poisoning.
m WARNING! Carbon monoxide is especially toxic to mother and child during
pregnancy, infants, the elderly, smokers, and people with blood or circulatory
system problems, such as anemia, or heart disease.
m WARNING! Do not use the grill in a confined and/or habitable space e.g.
houses, tents, caravans, motor homes, boats. Danger of carbon monoxide
poisoning fatality.
Only applicable to customers in Mexico:
m WARNING! This equipment is not intended for use by persons (including
children) whose physical, sensory or mental capacities are impaired or
reduced, or who lack experience and knowledge, unless such individuals receive
supervision or training on the operation of the equipment by a person
responsible for their security.
m WARNING! Children should be supervised to ensure that they do not use this
equipment as a toy.
DANGERS
m DANGER! Do not use indoors! This grill is designed for outdoor use in a
well-ventilated area and is not intended for and should never be used as a
heater. If used indoors, toxic fumes will accumulate and cause serious bodily
injury or death.
m DANGER! This grill is not intended for commercial use and is designed for
outdoor household use only.
m DANGER! Do not use this grill in a garage, building, breezeway, tent, lanai,
screened in porch, or any other enclosed area.
m DANGER! Never perform maintenance on this grill while it is plugged into a
power source. Always unplug the grill before servicing.
m DANGER! Hazardous voltage is present within the grill and can shock, burn or
cause death. Always unplug the grill from the power source before servicing or
cleaning.
WARNINGS
m WARNING! Do not use this grill unless all parts are in place. This grill
must be properly assembled according to the assembly instructions. Improper
assembly may be dangerous.
m WARNING! Never operate this grill without the ash and grease system in
place. Always use a drip pan to collect grease within the drawer.
m WARNING! Never remove the ash and grease system while operating the grill.
m WARNING! Do not use charcoal briquettes, liquid fuel or lava rock with this
grill.
m WARNING! Do not use this grill under any overhead combustible construction
including ceilings and overhangs.
m WARNING! The use of alcohol, prescription, or non-prescription drugs may
impair the consumer’s ability to properly assemble or safely operate the
grill.
m WARNING! Exercise caution when operating your grill. It will be hot during
preheating, cooking or cleaning, and should never be left unattended or moved
while in use.
m WARNING! Keep children and pets away.
m WARNING! This grill is not intended to be installed in or on recreational
vehicles and/or boats.
m WARNING! Do not use this grill within 2 feet (61cm) of any combustible
material. Combustible materials include, but are not limited to, wood or
treated wood decks, patios, porches, vinyl siding, and patio doors.
m WARNING! Keep the grill on a secure, level surface at all times, clear of
combustible materials.
m WARNING! Do not use the grill in high winds.
m WARNING! Do not wear clothing with loose flowing sleeves while lighting or
operating the grill.
m WARNING! Never touch the cooking grates, burn pot, glow plug, ash and grease
system, or grill to see if they are hot.
m WARNING! When finished cooking, use the main menu or push and hold the dial
to run the shutdown procedure and extinguish any fuel.
m WARNING! Use heat-resistant barbecue mitts or gloves while cooking and
handling lid, warming rack, thermometer, or temperature probes.
m WARNING! Maximum side table load is 40 pounds. Do not lean on or overload
the side table.
m WARNING! Do not move, cover or store the grill until all fuel is
extinguished and the grill is completely cool.
2
m WARNING! Do not use water to control flare ups or to extinguish fuel.
m WARNING! Use this grill only as described in this manual. Misuse may cause
fire, electric shock or injury.
m WARNING! This appliance should only be connected to a grounded outlet. Do
not use plug adapters. If an extension cord is needed, only use a 14-gauge
cable with a grounded plug, suitable for use with outdoor appliances. The
maximum length for the extension cord is 13 feet (4 meters). Keep the
extension cord as short as possible. Examine the extension cord before use and
replace if damaged. To minimize the risk of property damage and/ or personal
injury, do not use an extension power-supply cable unless it conforms to the
specifications listed in this manual.
m WARNING! Inspect the power cord and plug regularly for any signs of damage.
Do not operate appliance with damaged cord or plug.
m WARNING! Do not operate the unit if the electrical outlet is damaged.
m WARNING! Always unplug the grill by pulling from the plug. Do not pull from
the cord.
m WARNING! Do not use the grill within 10 feet (3m) of any body of water, such
as a pool or pond.
m WARNING! Keep the power cord and extension cord away from any heated
surfaces or water and arranged so as not to cause a tripping hazard. Use the
power cord management strap to avoid these hazards.
m WARNING! The food temperature probes are very sharp and can become hot when
in use. Use care when handling the probes to avoid the risk of injury.
m WARNING! Do not allow the hopper to empty during operation of this grill.
m WARNING! The power cord supplied with your grill has a three-prong
(grounding) plug for your protection against electrical shock hazard and
should be plugged directly into a grounded three-prong outlet. Do not cut,
remove or modify the plug in any way.
m WARNING! WEBER recommends that you regularly check the burn pot, auger and
cookbox for any obstructions that might block and prevent proper air flow. See
the RECOMMENDED CLEANING section for more details.
m WARNING! If the grill is stored outside during periods of non-use, rain or
high humidity, the wood pellets should be inspected within the hopper to
ensure they are dry. Hardwood pellets, when wet or exposed to high humidity,
can expand, break apart and clog or obstruct the auger feeding system.
m WARNING! If using the WEBER CONNECT app to monitor the operation of the
grill, make sure that all safety precautions otherwise applicable to the
operation of the grill have been observed prior to using the grill. Someone
familiar with the operation of the grill must be in close proximity of the
grill in order to address any emergencies that could arise. Do not leave the
grill unattended.
m WARNING! To decrease the chance of a grease fire, be sure the ash and grease
system, heat diffuser, and all FLAVORIZER bars are all properly installed.
CAUTIONS
m CAUTION! Make sure all electrical connections are kept dry and off of the
ground.
m CAUTION! Observe all local laws and regulations when using this appliance.
m CAUTION! When connecting this appliance to a power supply, ensure that the
supply voltage corresponds with the voltage rating marked on the appliance
label.
m CAUTION! Always unplug the grill from the outlet when not in use and before
cleaning. Allow the grill to cool before performing maintenance.
m CAUTION! Use extreme caution when removing the ash and grease system and
disposing of hot grease or ashes.
m CAUTION! Always store WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS in a dry
place located away from heat-producing appliances and moisture.
CALIFORNIA PROPOSITION 65
m WARNING! This product can expose you to chemicals including wood dust, which
is known to the State of California to cause cancer. For more information go
to www.P65Warnings. ca.gov.
m WARNING! This product can expose you to chemicals including combustion by-
products (including soot and carbon monoxide), which are known to the state of
California to cause cancer and birth defects or other reproductive harm. For
more information go to www. P65Warnings.ca.gov.
m WARNING! This product can expose you to chemicals including nickel, which is
known to the state of California to cause cancer. For more information go to
www.P65Warnings. ca.gov.
· 110 -127
· 50/60 Hz
· 85 W
· 2402.0 – 2480.0 MHz
Table of Contents
2 Safety
4 Warranty
5 Cooking System
6 Special Features
WEBER CONNECT Controller
8 Before Igniting
Choose a Proper Location to Cook Preparing Grill for First Time Startup Meal
to Meal Maintenance Every Time You Cook WEBER CONNECT App Connecting Your
Grill to Bluetooth® or Wi-Fi Network
11 Grill Operation
First Time Startup Procedure Every Time You Cook Cooking With Temperature
Probes Shutting Down Your Grill Changing Pellets / Purging Hopper Grilling
Methods Explore Your Settings
15 Controller Settings
Dashboard Main Menu Setting Up a Probed Cook Probed Cook Settings Cook
Programs Timers Regulatory Information
17 Troubleshooting
32 Maintenance
33 Grillmaster Tips
34 Replacement Parts
WARRANTY
Welcome to Weber
WEBER is proud to have you with us as you explore all of your future grilling
experiences. We pride ourselves on two things; making grills that last and
providing quality customer service care for a lifetime. Our commitment to
excellence and quality is unmatched and we stand by our products with a world
class warranty. Feel confident in your decision to buy a WEBER and enjoy your
journey to grilling happiness.
Warranty
Thank you for purchasing a Weber product. Weber-Stephen Products LLC, 1415 S.
Roselle Road, Palatine, Illinois 60067 pride ourselves on delivering a safe,
durable, and reliable product.
This is Weber’s Voluntary Warranty provided to you at no extra charge. It
contains the information you will need to have your Weber product repaired or
replaced in the unlikely event of a failure or defect.
Pursuant to applicable laws, the Owner has several rights in case the product
is defective. Those rights include supplementary performance or replacement,
abatement of the purchasing price, and compensation. These and other statutory
rights remain unaffected by this Warranty provision. In fact, this Warranty
grants additional rights to the Owner that are independent from statutory
Warranty provisions.
WEBER’s Voluntary Warranty
Weber warrants, to the purchaser of the Weber product (or in the case of a
gift (of a new grill) or promotional situation, the person for whom it was
purchased as a gift or promotional item) (“Owner”), that the Weber product is
free from defects in material and workmanship for the periods of time set
forth in the chart below, from the date of purchase when assembled and
operated in accordance with the accompanying Owner’s Manual, normal wear and
tear excluded. (Note: If you lose or misplace your Weber Owner’s Manual, a
replacement is available online at www. weber.com) Weber agrees within the
framework of this Warranty to repair or replace the part that is defective in
material or workmanship subject to the limitations, and exclusions listed
below. TO THE EXTENT ALLOWABLE BY APPLICABLE LAW, THIS WARRANTY IS EXTENDED
ONLY TO THE ORIGINAL PURCHASER AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS,
EXCEPT IN THE CASE OF GIFTS AND PROMOTIONAL ITEMS AS NOTED ABOVE.
PRODUCT WARRANTY PERIODS
Cook box and all components not covered below: 5 years
Electrical components: 3 years
Cooking grates, pellet slide, burn pot, heat baffle, pellet grate, controller
bezel: 3 years
Weber stands by its products and is happy to provide you with the Warranty
described for material defects in the grill or its relevant components, normal
wear and tear excepted.
·Normal wear and tear’ includes cosmetic and other immaterial deterioration that may come with ownership of your grill over time, such as surface rust, dents / scratches, etc. However, Weber will honor this Warranty for the grill or its relevant components where damage or dysfunction results from a material defect. ·Material defect’ includes rust through or burn through of certain parts, or
other damage or failure inhibiting your ability to safely / properly use your
grill.
Owner’s Responsibilities Under this Warranty / Exclusion of Warranty
To ensure trouble-free Warranty coverage, it is important (but not required)
that you register your Weber product online at www.weber.com. Please also
retain your original sales receipt and/or invoice. Registering your Weber
product confirms your warranty coverage, will expedite any Warranty claims you
may need to make, and provides a direct link between you and Weber in case we
need to contact you. If you have not had time to register your grill before
calling for Warranty service, please have the following information available
when you do call:
Name Address Phone Number Email Serial Number Purchase Date
Purchase Dealer Model Color Primary Issue
This Warranty only applies if the Owner takes reasonable care of the Weber
product by following all assembly instructions, usage instructions, and
preventative maintenance as outlined in the accompanying Owner’s Manual,
unless the Owner can prove that the defect or failure is independent of non-
compliance with the above mentioned obligations. If you live in a coastal
area, or have your product located near a pool, maintenance includes regular
washing and rinsing of the exterior surfaces as outlined in the accompanying
Owner’s Manual.
This WARRANTY lapses if there are damages, deteriorations, discolorations,
and/or rust for which Weber is not responsible caused by:
· Abuse, misuse, alteration, modification, misapplication, vandalism, neglect,
improper assembly or installation, and failure to properly perform normal and
routine maintenance;
· Insects (such as spiders) and rodents (such as squirrels).
· Exposure to salt air and/or chlorine sources such as swimming pools and hot
tubs/spas;
· Severe weather conditions such as hail, hurricanes, earthquakes, tsunamis or
surges, tornadoes or severe storms.
· Acid rain and other environmental factors
The use and/or installation of parts on your Weber product that are not
genuine Weber parts will void this Warranty, and any damages that result
hereby are not covered by this Warranty.
Weber Stephen Mexico may only claim exemption from honoring the warranty in
the following cases:
a) When the product has been used outside normal operating conditions.
b) When the product has not been used in accordance with the accompanying
instructions for use.
c) When the product has been altered or repaired by persons not authorized to
do so by the relevant domestic manufacturer, importer or retailer.
Warranty Processing
If you believe that you have a part which is covered by this Warranty, please
contact Weber Customer Service using the contact information on our website
(www.weber.com) Weber will, upon investigation, repair or replace (at its
option) a defective part that is covered by this Warranty. In the event that
repair or replacement are not possible, Weber may choose (at its option) to
replace the grill in question with a new grill of equal or greater value.
Weber may ask you to return parts for inspection, shipping charges to be pre-
paid by Owner.
When you contact Customer Service, please have the following information
available:
Name Address Phone Number Email Serial Number Purchase Date
Purchase Dealer Model Color Primary Issue
4
Disclaimers
APART FROM THE WARRANTY AND DISCLAIMERS AS DESCRIBED IN THIS WARRANTY
STATEMENT, THERE ARE EXPLICITLY NO FURTHER WARRANTY OR VOLUNTARY DECLARATIONS
OF LIABILITY GIVEN HERE WHICH GO BEYOND THE STATUTORY LIABILITY APPLYING TO
WEBER. THE PRESENT WARRANTY STATEMENT ALSO DOES NOT LIMIT OR EXCLUDE
SITUATIONS OR CLAIMS WHERE WEBER HAS MANDATORY LIABILITY AS PRESCRIBED BY
STATUTE.
NO WARRANTIES SHALL APPLY AFTER THE PERIODS OF THIS WARRANTY STATED ABOVE. NO
OTHER WARRANTIES GIVEN BY ANY PERSON, INCLUDING A DEALER OR RETAILER, WITH
RESPECT TO ANY PRODUCT (SUCH AS ANY “EXTENDED WARRANTIES”), SHALL BIND WEBER.
THE EXCLUSIVE REMEDY OF THIS WARRANTY IS REPAIR OR REPLACEMENT OF THE PART OR
PRODUCT.
IN NO EVENT UNDER THIS VOLUNTARY WARRANTY SHALL RECOVERY OF ANY KIND BE
GREATER THAN THE AMOUNT OF THE PURCHASE PRICE OF THE WEBER PRODUCT SOLD.
YOU ASSUME THE RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO YOU AND YOUR
PROPERTY AND/OR TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE MISUSE OR
ABUSE OF THE PRODUCT OR FAILURE TO FOLLOW INSTRUCTIONS PROVIDED BY WEBER IN
THE ACCOMPANYING OWNER’S MANUAL.
PARTS AND ACCESSORIES REPLACED UNDER THIS WARRANTY ARE WARRANTED ONLY FOR THE
BALANCE OF THE ABOVE MENTIONED WARRANTY PERIODS.
THIS WARRANTY APPLIES TO PRIVATE SINGLE FAMILY HOME OR APARTMENT USE ONLY AND
DOES NOT APPLY TO WEBER GRILLS USED IN COMMERCIAL, COMMUNAL OR MULTI-UNIT
SETTINGS SUCH AS RESTAURANTS, HOTELS, RESORTS, OR RENTAL PROPERTIES.
WEBER MAY FROM TIME TO TIME CHANGE THE DESIGN OF ITS PRODUCTS. NOTHING
CONTAINED IN THIS WARRANTY SHALL BE CONSTRUED AS OBLIGATING WEBER TO
INCORPORATE SUCH DESIGN CHANGES INTO PREVIOUSLY MANUFACTURED PRODUCTS, NOR
SHALL SUCH CHANGES BE CONSTRUED AS AN ADMISSION THAT PREVIOUS DESIGNS WERE
DEFECTIVE.
Weber-Stephen Products LLC Customer Service Center 1415 S. Roselle Road
Palatine, IL 60067 U.S.A.
For replacement parts, call:
1-800-446-1071
COOKING SYSTEM
A Porcelain Enameled Lid and Cookbox
Built to outlast the competition, SMOKEFIRE’s shine goes far beyond looks. The
exclusive WEBER Porcelain-Enameled finish withstands the elements and helps
prevent rusting and cracking over time.
B Large Hopper
The large capacity hopper holds an entire 20 pound bag of pellets, and then
some perfect size for all day smoking.
C Responsive Incline Drive Engine
This DC powered engine was built to heat hotter and faster than most pellet
grills in order to reach a 200º-600°F (93º-315°C) temperature range. This
gives you the versatility to sear steaks, smoke BBQ ribs, bake pizza, and
everything in between.
D Easy-Clean Ash and Grease System
With superior ash and grease removal, the ash and grease are channeled into an
external, contained drawer for a quick and easy cleanup. This means not having
to look at all that nasty grease in a bucket hanging from the side of your
beautiful new pellet grill. This unique system also prevents ash from blowing
up into the cookbox and onto your food.
E Large Grilling Area
Two large levels of cooking space will hold enough food to feed everyone at
the party.
F Glow Plug Ignition
The glow plug provides ignition for the fuel in your pellet grill, similar to
a heating element in a electric oven.
A
E C
B
12 3 4
F
D
5 weber.com
SPECIAL FEATURES
A WEBER CONNECT Controller
The WEBER CONNECT controller (A) gives you complete control over how your
WEBER SMOKEFIRE grill operates. Use the controller to start up your grill,
select temperature settings, monitor your cook, and more. Explore more options
within the main menu of the controller.
B Integrated Wi-Fi and Bluetooth®
Using your smartphone, login to the WEBER CONNECT app (B) to get the latest
software and connect to your grill. The WEBER CONNECT app tells you when it’s
time to flip, rest, and serve directly from your smartphone. The remote
grilling access feature gives you the freedom to walk away, monitor, and even
adjust the heat from the palm of your hand.
C FLAVORIZER Bars and Heat Diffuser
The FLAVORIZER bars and heat diffuser (C) direct heat to every inch of the
cooking grate so that your entire meal cooks evenly, with no worry of hot or
cold spots. While grilling at high heat, drippings are also caught and sizzle,
creating an amazing boost of flavor.
D Ambient and Food Temperature Probes
In order to remotely monitor your grill temperature and internal food
temperatures, your SMOKEFIRE grill comes with an attached ambient temperature
probe and a food temperature probe (D) that will directly connect and interact
with the controller (the controller can hold up to 4 separate food temperature
probes sold separately).
E Large Side Table with Tool Hooks
Use the side table (E) to keep platters, seasonings, and tools within arm’s
reach, or use it as a workspace for prep. The tool hooks are also a great
place to hang your grilling tools for when you need them.
F Accessories
Add on to your SMOKEFIRE grill to customize your grilling experience. Visit
www.weber.com to find all of your favorite WEBER accessories.
A
1
2
3
4
B
C
D
E
6
SPECIAL FEATURES
WEBER CONNECT CONTROLLER
B A
1
2
3
4
F
CG D E
A Dashboard
The LCD display dashboard on your controller is where you can visually check
temperatures, receive notifications, view connectivity status, explore menu
options, and check the status of your cook.
B Selection Dial
Turn the selection dial to adjust grill temperature, navigate through the
dashboard, select menu options, and more. Push the dial to confirm a
selection. Push and hold the dial to initiate the shutdown procedure.
C Main Menu / Back
From the dashboard, pressing the button takes you to the main menu. As you
navigate through menu options using the dial, pressing the button again will
take you one step back. Press and hold the button to return to the dashboard.
From the main menu, pushing the button takes you back to the dashboard.
D Cook Program
Push the button to engage with WEBER cook programs such as fish, poultry, red
meat, vegetables, and more. Download the WEBER CONNECT app using your
smartphone to follow the programed grilling steps displayed on the controller
and on your app.
E Timer
Push the button to start a new timer. Use the dial to increase or decrease the
desired amount of time. Push the dial to select and start your timer.
F Food Temperature Probes
Your new WEBER SMOKEFIRE grill can handle up to four separate food temperature
probes (one probe included) to gain superior control over your grill for
perfect results every time.
G SMOKEBOOST
A flavor mode that adds an extra kick of smoky, wood fired taste to your food
for low and slow cooks.
NOTE: Download the WEBER CONNECT app to get the latest grill software and
controller features.
7 weber.com
BEFORE IGNITING
Choose A Proper Location To Cook
In order to ensure a safe and enjoyable grilling experience, it is important to
B
remember these rules when choosing a location for your WEBER SMOKEFIRE:
· Do not use indoors! This grill is designed for outdoor use in a well- ventilated area and is not intended for and should never be used as a heater. If used indoors, toxic fumes will accumulate and cause serious bodily injury or death.
· Do not use in a garage, building, breezeway, tent, or any other enclosed area.
· Do not use this grill within 2 feet (70 cm) of any combustible material. Combustible materials include, but are not limited to, wood or treated wood decks, patios, and porches.
· Keep the cooking area clear of flammable vapor and liquids, such as gasoline, alcohol, etc.
· Do not use this grill under any overhead combustible construction including ceilings, overhangs, a lanai or screened in porch.
· Do not use the grill within 10 feet (3.05 m) of any body of water, such as a pool or pond.
C
· Do not use the grill in a confined and/or habitable space e.g. houses, tents, caravans, motor homes, boats. Danger of carbon monoxide poisoning fatality.
· Always store WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS in a dry place located away from heat-producing appliances and moisture.
Preparing Grill For First Time Startup
Before the first startup of your WEBER SMOKEFIRE grill, there are some necessary steps to be followed:
1. Remove all packaging materials from the grill.
2. Open the grill lid and make sure the heat baffle, heat diffuser, FLAVORIZER bars and cooking grates are properly installed inside the cookbox (A).
3. Plug the power cord into the bottom of the hopper before plugging it
into a grounded electrical outlet. With the power supply switch in the off
D
position, plug your grill into a grounded outlet (B).
4. Open the hopper lid and check the bottom inside of the hopper to ensure there are no foreign objects obstructing the auger and that the hopper finger safety guard is in place. (C).
NOTE: Make sure the hopper slide door is closed before filling the hopper with pellets.
5. Fill the hopper with your choice of WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (D). Close the hopper lid when filled.
6. Turn the power supply switch, located on the bottom of the hopper, to the ON position (E).
A
E
8
Meal to Meal Maintenance Every Time You Cook
To ensure that your WEBER SMOKEFIRE grill operates safely and smoothly every
time you start it up, here are some steps to follow before you start grilling:
1. Visually check the cookbox and clean the ash and grease system drawer
before every cook (A). If the disposable drip pan has grease in it, discard it
and replace with a new one.
NOTE: ALWAYS USE A DISPOSABLE DRIP PAN INSIDE THE ASH AND GREASE SYSTEM
DRAWER. WARNING: DO NOT REMOVE THE ASH AND GREASE SYSTEM DRAWER WHILE
OPERATING THE GRILL, OR IF STILL HOT AFTER SHUTDOWN. Frequently replace the
disposable drip pan before igniting the grill to reduce the risk of a grease
fire.
2. Make sure the hopper is filled with your choice of WEBER SMOKEFIRE ALL
NATURAL HARDWOOD PELLETS (B).
3. Check that the power cord is connected to the bottom of the hopper before
plugging it into an electrical outlet (C).
m WARNING! Keep the power cord and extension cord away from any heated
surfaces or water and arranged so as not to cause a tripping hazard. Use the
power cord management strap to avoid these hazards (D). 4. Turn the power
supply switch, located on the bottom of the hopper, to the on position (E).
A
BEFORE IGNITING
B
C
D
E
9 weber.com
BEFORE IGNITING
WEBER CONNECT App
First things first.
Download the WEBER CONNECT app.
To fully activate and update your new WEBER CONNECT controller, it is important to first download the WEBER CONNECT app.
Download, connect and register to receive:
· Flip and Serve Notifications
· Food Readiness Countdowns
· Custom Food Doneness Alerts
· Step-by-step Grilling Assistance
Connecting Your Grill To Bluetooth® or Wi-Fi Network
®
To connect your WEBER SMOKEFIRE grill via Bluetooth® or your local Wi-Fi network, follow these steps:
NOTE: WEBER recommends that your smartphone be running the latest version of its operating system before attempting to connect your grill to Bluetooth® or your Wi-Fi network.
1. Turn on the grill’s power supply switch located under the hopper.
2. Verify that your smartphone is connected to Bluetooth® or your local Wi-Fi network.
3. From your smartphone, download the WEBER CONNECT app from the App Store on Apple smartphones, or the Play Store on Android smartphones.
4. Open the WEBER CONNECT app and follow the in-app instructions for connecting to your SMOKEFIRE grill.
NOTE: In order to successfully connect your smartphone to your grill via a local Wi-Fi network, first make sure your grill is paired via Bluetooth® and that your grill is within range of your Wi-Fi router. If your attempts to connect have been unsuccessful, try moving the grill within range of the Wi-Fi router or adding a signal extender for a stronger signal. Be sure to locate the grill at least 2 feet away from any combustible materials and flammable liquids.
Remote Temperature Control
Whether prepping dessert from the kitchen or relaxing in the sun, you can now
adjust the temperature of SMOKEFIRE from wherever you are.
Remote Barbecue Shut Down
Whether setting the table, or way too comfortable on the couch, you can now
shut down SMOKEFIRE from wherever you are.
SMOKEBOOST
A flavor mode that adds an extra kick of smoky, wood fired taste to your food
for low & slow cooks. Use at the start of a low & slow cook with food such as
brisket, pork shoulder, poultry, and fish that will be smoked at low temps.
When activated, it cools and adjusts to a temperature range between 165º-200ºF
(74º-93ºC), dependent on ambient condition.
10
First Time Startup Procedure
Once all of the setup steps have been followed in the previous section, BEFORE
IGNITING, you can now initiate the startup procedure to preheat your SMOKEFIRE
grill for the first time.
NOTE: If this is the very first time starting your SMOKEFIRE grill, WEBER
recommends that you season your grill on the high temperature setting
(600°F/315ºC) for at least 30 to 40 minutes with the grill lid closed.
Please follow these steps the very first time you ignite your grill:
1. Make sure the hopper is filled with your choice of WEBER SMOKEFIRE ALL
NATURAL HARDWOOD PELLETS (A).
2. Open the grill lid.
3. Using the dial on the controller, choose the highest temperature available
(600°F/315ºC), and push the dial to select it (B).
NOTE: Do not push and hold the dial as it will begin the shutdown procedure.
4. Once smoke becomes visible, close the grill lid and let the grill run for
at least 30 to 40 minutes to season your grill (C).
5. When the grill has been seasoned, open the grill lid and clean the cooking
grates using a grill brush or wood scraper (D).
6. With the grill lid open, push and hold the dial to shutdown your grill.
Alternatively, you can push the main menu button . Using the dial on the
controller, scroll through the main menu and push to select “Shutdown”.
7. Once your grill has completed a proper shut down and completely cooled,
power off the grill and unplug from the power source.
WARNING: ALWAYS MAKE SURE THE GRILL IS COMPLETELY COOLED AND UNPLUGGED FROM A
POWER SOURCE BEFORE PERFORMING ANY MAINTENANCE OR CLEANING.
8. Remove internal grill components and clean your cookbox by pushing the ash
into the ash and grease system drawer with the provided WEBER scraper. Follow
the “RECOMMENDED CLEANING” section at the rear of this Owner’s Guide for
additional tips.
9. Now that your grill is cleaned and all internal grill components are
properly reinstalled, you can start cooking, connect food temperature probes,
start a timer, or select a cook program, all from the controller.
Every Time You Cook
Once all of the setup steps have been followed in the previous section, BEFORE
LIGHTING, you can now initiate the startup procedure to preheat your grill.
Please follow these steps every time you operate your SMOKEFIRE grill:
1. Make sure the hopper is filled with your choice of WEBER SMOKEFIRE ALL
NATURAL HARDWOOD PELLETS (A).
2. Clean any ash or grease from the ash and grease system drawer.
3. Open the grill lid.
4. Using the dial on the controller, select your desired temperature and push
the dial to select it (B).
NOTE: Do not push and hold the dial as it will begin the shutdown procedure.
5. Once smoke becomes visible, close the grill lid and let the grill preheat
to the selected temperature (C).
6. When the grill has been preheated, open the grill lid and clean the
cooking grates using a grill brush or wood scraper (D).
NOTE: WEBER recommends always cooking with the grill lid closed and letting
your grill preheat before cleaning your cooking grates.
7. Start grilling! You can now connect food temperature probes, start a
timer, or select a cook program all from the controller.
GRILL OPERATION
A
B
—
Turn dial to set grill temperature, push to confirm.
C
D
12 3 4 12 3 4
11 weber.com
GRILL OPERATION
Cooking with Temperature Probes
Use the included food temperature probe to gain complete control of your
A
WEBER SMOKEFIRE for the perfect food, every time.
WARNING: Handling the food temperature probes without hand protection will result in severe burns. Always wear heat protective barbecue mitts or gloves when handling temperature probes.
Please follow these steps for using food temperature probes:
1. Once the grill has been preheated, open the grill lid and clean the cooking
12 3 4
grates using a grill brush or wood scraper (A), then place your food on
the grates.
2. Plug the food temperature probe(s) into the bottom of the controller and, using heat resistant barbecue mitts or gloves, route the probe(s) between the grill lid and the top of the cookbox (B).
3. Insert food temperature probe(s) into the center of the thickest part of your food (C).
4. Close the grill lid.
B
NOTE: Be sure to route food temperature probe wires through the channel in the
grill lid to avoid damaging them.
5. From the dashboard on the controller display, select the corresponding tile to set a desired food temperature or select a cook program for each food temperature probe (D). Simply turn the dial left or right to navigate through menu options until the desired settings are displayed, then push the dial to select. On the controller display, and when connected to the WEBER CONNECT app, you will receive a notification when your food has reached the set temperature(s).
C
D
375°F 550°
76°
Probe 1
79°
Probe 2
12
Shutting Down Your Grill
When your cook has ended, your WEBER SMOKEFIRE must be properly powered down
to clear the auger and burn pot of any remaining pellets and ashes. This helps
your grill be ready to go the next time you want to start it up.
Please follow these steps to properly shut down your WEBER SMOKEFIRE:
1. When your food is cooked to your desired internal temperature, using heat
resistant barbecue mitts or gloves, open the grill lid, remove and unplug any
food temperature probes from the food and cookbox, and remove all food off of
the cooking grates (A).
WARNING: Food temperature probes, grill handles and grill surfaces will be
hot. Always use heat resistant barbecue mitts or gloves before handling,
cleaning, moving, or storing the grill or its parts.
NOTE: For food temperature probe cleaning instructions, see the MAINTENANCE
section later in this manual.
2. With the grill lid open, push and hold the dial to shutdown your grill
(B). Alternatively, you can push the main menu button . Using the dial on the
controller, scroll through the main menu and push to select “Shutdown”.
CAUTION: Always engage the shutdown procedure with the grill lid open to
properly shutdown your grill when finished cooking. Frequently interrupted
cook cycles could cause component failure.
3. Your SMOKEFIRE grill will run through a series of steps in order to
properly and safely shutdown your grill. Once the shutdown procedure is
complete and the grill has cooled, power off your grill (C) and unplug from
the power source.
4. Close the grill lid (D).
GRILL OPERATION
A
B
1
2
3
4
C
D
12 3 4
13 weber.com
GRILL OPERATION
Changing Pellets/Purging Hopper
There may be times when you want to change the WEBER SMOKEFIRE ALL
A
NATURAL HARDWOOD PELLET flavor for your next grilling session, or purge
the hopper for a thorough cleaning or maintenance.
1. From the rear of your SMOKEFIRE grill, set a large container underneath the middle of the hopper (A).
2. Pull the hopper slide door located on the rear of the hopper to release the pellets into the container below (B).
WARNING: Before filling your hopper with WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS, visually inspect the hopper finger safety guard to ensure it is in place and not damaged (C). If damaged, immediately contact the Customer Service Representative in your area using the contact information on our website for a replacement.
We recommend using WEBER SMOKEFIRE ALL NATURAL HARDWOOD
PELLETS with your SMOKEFIRE grill. For best results, store your pellets in an
air tight container to prevent moisture from impacting pellet performance.
Always check the condition of your pellets before grilling. The best way to
B
judge the freshness of pellets is to break one in half. Pellets should break
with a snap, not crumble in your hand. Pellets that crumble in your hand may
impact the performance of your grill.
Grilling Methods
Your WEBER SMOKEFIRE is capable of many different cooking methods such as
grilling, searing, smoking, baking, braising, and roasting. Part of the
excitement of pellet grilling is that you get to enjoy all of your favorite
recipes infused with real hardwood flavor. This element of flavor can elevate
your average meal and make it something extraordinary.
NOTE: When grilling or smoking over a longer period of time, WEBER encourages
the use of our large WEBER foil pans between the FLAVORIZER bars and cook
grates to catch drippings and grease for easier clean up.
Explore Your Settings
There are many more features to be explored on the controller and the WEBER
C
CONNECT app. From programmable timers to cook programs, there are more
reasons to love your WEBER SMOKEFIRE grill. Explore and experiment with all
of the possibilities.
14
CONTROLLER SETTINGS
NOTE: Download the WEBER CONNECT app to get the latest grill software and
controller features.
Dashboard
The dashboard shows all of the current grill info on the controller display.
Here you will find your current and target grill temperature, device
connectivity status, and separate tiles that can be setup to display guided
cook programs, timers and food temperature probe information.
375°F 550°
76°
Probe 1
Main Menu
Push the main menu button to navigate through all of the available settings on
the controller. Simply turn the dial and then push it to select your options.
Home Temperature SMOKEBOOST Language
Menu
350°F Off
English
Setting Up A Probed Cook
Once you plug a food temperature probe into any of the four available ports on
the controller, turn and push the dial to select the tile that corresponds
with the probe number you want to set options for.
375°F 550°
76°
Probe 1
79°
Probe 2
Probed Cook Settings
Once a food temperature probe is selected from the dashboard, you have the
option to select a cook program or simply set a temperature alarm to notify
you when your food has reached the desired temperature.
Probe 1
Add Program Set Temperature Alert Temperature
75°F
SMOKEBOOST
Add an extra kick of smoky, wood fired taste by selecting SMOKEBOOST on the
controller’s main menu. SMOKEBOOST is a flavor mode to use at the start of a
low & slow cook. When activated, it cools and adjusts to a temperature range
between 165º-200º F (74º- 93º C), dependent on ambient condition.
Menu
Home Temperature SMOKEBOOST Language
Off
350°F
On
Off
English
SMOKEBOOST
15 weber.com
CONTROLLER SETTINGS
Cook Programs
If selecting a guided cook program, push the button. Turn and press the dial
to select the type of food that you will be cooking. Recently used cook
programs will be saved within your controller for quick access to frequently
cooked foods.
After selecting your cook program, you can adjust the desired food settings to
your personal preference.
NOTE: Some foods will only allow you to select one temperature doneness choice
in order to ensure safe food temperatures when the food has completed cooking.
Once all of your desired settings have been chosen, turn and press the dial to
select the “Start Cooking” option.
NOTE: When using a guided cook program, you will receive timely tips and
notifications throughout your grilling experience to help guide you to
perfectly cooked food, every time.
Programs Beef Tenderloin Chicken Breast Chicken Wings Baked Potato
Beef Tenderloin
Start Cooking Doneness Thickness Probe
10-12m Medium
1″
Timers
Press the button to add a new timer(s). Turn the dial and press it to select
the amount of time desired. From the dashboard or through the main menu, you
can select your active timer to adjust the amount of time left or stop it.
New Timer
0:00
0 5 10 15 20
Regulatory Information
To access regulatory information, press the press the dial to select
“Regulatory”.
main menu button. Turn and
Language Get the App About Regulatory
Menu
English
16
TROUBLESHOOTING
NOTE: Download the WEBER CONNECT app to get the latest grill software and
controller features.
The controller uses advanced technology capable of troubleshooting your
SMOKEFIRE grill. If a problem is detected with your grill, your controller
will display and send an error code to notify you of the error before
automatically beginning the necessary procedure. Refer to this troubleshooting
section and follow the “SOLUTION” column associated with the error code
displayed, along with the following instructions to remedy and clear errors.
Error Code Cause
Solution
E1
Auger Jam
Auger jam has been detected. The grill will attempt to clear the auger jam.
Auger Jam Cleared or
Auger Jam Cannot Be Cleared
1. The grill will automatically run the shutdown procedure if the grill is
still hot. Open the grill lid and wait until the grill has completed the
shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug
from power source.
3. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle
from the cookbox.
4. Clean the cookbox and burn pot of any ash or debris using a grill brush or
scraper to direct it into the ash and grease system.
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning
the grill.
5. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox.
6. Remove and clean any ash or grease from inside the ash and grease system.
Once cleaned, reinstall the drawer. Replace disposable drip pans as needed.
7. Plug the grill into the power source and power on the grill to begin your
cook.
If the grill is unable to clear the auger jam, please refer to the following
instructions on how to manually clear the auger.
The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled.
E2
Fan Error
CAUTION: Do not unplug the grill or power it off during the shutdown procedure.
See the following instructions on how to check the fan’s electrical connection. If the fan is not operating after securing fan connection, contact the Customer Service Representative in your area using the contact information on our website for fan replacement.
1. The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown procedure.
E3
Grill Flame is Out
See the following instructions on the Grill Flame Out procedure. If your grill is still
unable to stay ignited after completing the procedure, contact the Customer Service
Representative in your area using the contact information on our website for further
troubleshooting assistance.
17 weber.com
TROUBLESHOOTING
Error Code
E4 E5
E6
18
Cause
Communication Failure Grill is too Hot
Start Up Failure
Solution
1. The grill will automatically run the shutdown procedure if the grill is
still hot. Open the grill lid and wait until the grill has completed the
shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug
from power source.
3. Wait one minute, then plug the grill back into the power source and power
on the grill to begin your cook.
1. The grill will automatically run the shutdown procedure if the grill is
still hot. Keep the grill lid closed and wait until the grill has completed
the shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug
from power source.
3. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat
diffuser, and heat baffle from the cookbox.
4. Clean the cookbox and burn pot of any ash or debris using a grill brush or
scraper to direct it into the ash and grease system.
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning
the grill.
5. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox.
6. Remove and clean any ash or grease from inside the ash and grease system.
Once cleaned, reinstall the drawer. Replace disposable drip pans as needed.
7. Plug the grill into the power source and power on the grill to begin your
cook.
1. The grill will automatically run the shutdown procedure if the grill is
still hot. Open the grill lid and wait until the grill has completed the
shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug
from power source.
3. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat
diffuser, and heat baffle from the cookbox.
4. Clean the cookbox and burn pot of any ash or debris using a grill brush or
scraper to direct it into the ash and grease system.
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning
the grill.
5. Remove and clean any ash or grease from inside the ash and grease system.
Once cleaned, reinstall the drawer. Replace disposable drip pans as needed.
6. Plug the grill into the power source and power on the grill.
7. Turn and push the dial on the controller to select 400°F as your grill
temperature.
8. As the grill starts to preheat, visually inspect the glow plug at the
bottom of the cookbox.
WARNING: Do not touch the glow plug to check if it is hot. If the glow plug is
operating correctly, it will start to glow in color as it heats.
If the glow plug is operating correctly:
9. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox.
If the glow plug is not operating correctly:
· The grill will remain cool and will not ignite. Shutdown the grill by
pressing and holding the dial on the controller. Contact the Customer Service
Representative in your area using the contact information on our website for
glow plug replacement.
TROUBLESHOOTING
Error Code
E7 E8 E9
Cause
Motor Failure Thermocouple Error Low Fuel Detection Error
Solution
The grill will automatically run the shutdown procedure if the grill is still
hot. Open the grill lid and wait until the grill has completed the shutdown
procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
See the following instructions on how to check the motor’s electrical
connection. If the motor is not operating after securing the motor connection,
contact the Customer Service Representative in your area using the contact
information on our website for motor replacement.
The grill will automatically run the shutdown procedure if the grill is still
hot. Open the grill lid and wait until the grill has completed the shutdown
procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
Contact the Customer Service Representative in your area using the contact
information on our website to replace the thermocouple.
The grill will automatically run the shutdown procedure if the grill is still
hot. Open the grill lid and wait until the grill has completed the shutdown
procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure.
See the following instructions on how to clean the low fuel sensor window. If
the low fuel sensor is not operating properly after cleaning, contact the
Customer Service Representative in your area using the contact information on
our website for low fuel sensor replacement.
CALL CUSTOMER SERVICE
If you are still experiencing any problems, contact the Customer Service
Representative in your area using the contact information on weber.com.
REPLACEMENT PARTS
To obtain replacement parts, contact the local retailer in your area or log
onto weber.com.
19 weber.com
TROUBLESHOOTING
E1 Auger Jam
Clearing an Auger Jam
B
To clear the E1 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and completely cooled, power off the grill and unplug from power source.
2. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. (A).
3. From the rear of your SMOKEFIRE grill, place a large bucket or container underneath the middle of the hopper (B).
4. Pull the hopper slide door located on the rear of the hopper to release the pellets into the container below (C).
5. From the rear of your SMOKEFIRE grill, remove the rear access panel by removing four screws (D).
6. Disconnect wire connection from the motor by pinching the clip and
pulling the quick disconnect plug. (E).
C
A
D
E
20
7. Remove the auger/motor assembly by first removing two screws and washers
from the mounting bracket (F). Carefully slide and twist the auger/motor
assembly out and away from the grill (G).
NOTE: Visually note the orientation of the motor when installed on the grill.
8. Clean the auger tube and auger/motor assembly to remove any pellets and
debris that may have been jamming the auger.
9. Before reinstalling the auger/motor assembly back into the auger tube,
verify that the shear pin is still intact (H). Both sides of the pin should be
fully engaged and visible. The auger should not pull away from the motor. If
the shear pin is broken, it should be replaced before reassembling. Contact a
WEBER Customer Service Representative in your area using the contact
information on our website for a replacement.
10. Reinstall the auger/motor assembly by sliding the auger through the auger
tube and fastening the assembly with two screws and washers (I).
CAUTION: Make sure the auger/motor assembly is in the correct orientation when
reinstalling into the auger tube. See illustration (J).
11. Connect the motor’s electrical connection. Make sure the connector is
securely joined to the motor (K).
TROUBLESHOOTING
H
I
F
J G
K
21 weber.com
TROUBLESHOOTING
Continued…
L
12. Reinstall the rear access panel (L). 13. Push the hopper slide door
closed (M). 14. Open the hopper lid and fill the hopper with your choice of
WEBER
SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (N). 15. Reinstall the heat baffle,
heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox. (O). 16. Plug in, power on the grill, and begin a
cook to allow the controller to run
diagnostics. If the E1 error code still remains on the controller, contact the
Customer Service Representative in your area using the contact information on
our website.
M
N
O
22
E2 Fan Error
Checking Fan Electrical Connection
To clear the E2 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and completely cooled,
power off the grill and unplug from power source (A).
2. From the rear of your SMOKEFIRE grill, remove the rear access panel by
removing four screws (B).
3. Check the electrical connection to the fan (C). Make sure the connector is
securely joined to the fan’s connection point.
4. Reinstall the rear access panel (D).
5. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics.
6. If the E2 error code still remains on the controller, contact the Customer
Service Representative in your area using the contact information on our
website for fan replacement.
TROUBLESHOOTING
A
B
C
D
23 weber.com
TROUBLESHOOTING
E3 Grill Flame is Out
Grill Flame Out Procedure
C
To clear the E3 error code from the controller, please follow these steps:
1. The grill will automatically run the shutdown procedure if the grill is still hot. Open the grill lid and wait until the grill has completed the shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug from power source (A).
3. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox (B).
4. Clean the cookbox and burn pot of any ash or debris using a grill brush or scraper to direct it into the ash and grease system (C).
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning
D
the grill.
5. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking grates inside the cookbox (D).
6. Remove and clean any ash or grease from inside the ash and grease system. Once cleaned, reinstall the drawer (E). Replace disposable drip pans as needed.
7. Plug the grill into the power source and power on the grill to begin your cook.
A
E
B
24
E7 Motor Failure
Checking Motor Electrical Connection
To clear the E7 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and completely cooled,
power off the grill and unplug from power source (A).
2. From the rear of your SMOKEFIRE grill, remove the rear access panel by
removing four screws (B).
3. Check the electrical connection on the motor (C). Make sure the connector
is securely joined to the motor.
4. Reinstall the rear access panel (D).
5. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics.
6. If the E7 error code still remains on the controller, contact the Customer
Service Representative in your area using the contact information on our
website for motor replacement.
TROUBLESHOOTING
A
B
C
D
25 weber.com
TROUBLESHOOTING
E9 Low Fuel Detection Error
Cleaning Fuel Sensor Window
A
To clear the E9 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and completely cooled, from the rear of your SMOKEFIRE grill, set a large bucket or container underneath the middle of the hopper (A).
2. Pull the hopper slide door located on the rear of the hopper to release the pellets into the container below (B).
3. Using a dry cloth or paper towel, wipe the low fuel sensor window until cleaned (C).
4. Push the hopper slide door closed (D), and refill the hopper with your choice of WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS.
5. Power on the grill and begin a cook to allow the controller to run diagnostics.
6. If the E9 error code still remains on the controller, Contact the
B
Customer Service Representative in your area using the contact
information on our website for low fuel sensor replacement.
C
4 3 12
D
26
Notification
Low Fuel Cook Complete Improper Shutdown
Replace Glow Plug
Shutdown Started
TROUBLESHOOTING
NOTE: Download the WEBER CONNECT app to get the latest grill software and
controller features. The controller will display and send notifications to
inform you of certain grill operations and preventative maintenance cautions.
Refer to this troubleshooting section and follow the “Sequence / Actions”
column associated with the notification displayed along with the following
instructions.
Sequence / Actions
Refill the hopper with WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS.
Your cook has ended. You now have the option to continue to cook at the same
grill temperature, change the grill temperature, or shutdown the grill.
The grill was improperly shutdown. 1. The grill will automatically run the
shutdown procedure if the grill is still hot. Open the grill lid and wait
until the grill has completed the shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure. 2. Once the shutdown procedure is complete, power off the grill and
unplug from power source. 3. Remove the cooking grates, FLAVORIZER bars, heat
diffuser, and heat baffle from the cookbox. 4. Clean the cookbox and burn pot
of any ash or debris using a grill brush or scraper to direct it into the ash
and grease system.
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning
the grill. 5. Remove and clean any ash or grease from inside the ash and
grease system. Once cleaned, reinstall the drawer. Replace disposable drip
pans as needed. 6. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars
and cooking grates inside the cookbox. 7. Plug in, power on the grill, and
begin a cook to allow the controller to run diagnostics.
Glow plug is about to reach the end of its life. Do you want to replace it? If
YES:
1. Open the grill lid and shutdown the grill by pushing and holding the dial
or using the main menu. Wait until the grill has completed the shutdown
procedure and completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown
procedure. 2. Contact a Customer Service Representative in your area using the
contact information on our website to replace the glow plug. 3. See the
following instructions on replacing the glow plug. 4. When the glow plug has
been replaced, confirm replacement within the main menu settings of the
controller.
If NO: You can continue to operate your grill. Glow plug replacement
notification will remain on list of outstanding error codes and notifications
until it has been replaced and confirmed.
Shutdown Sequence: 1. Burning off excess fuel 2. Preventing burn-back 3.
Clearing auger 4. Cleaning burn pot of ash 5. Cooling grill for storage 6.
Shutdown Complete
27 weber.com
TROUBLESHOOTING
Replacing the Glow Plug
Contact WEBER Customer Service at weber.com for a replacement glow
A
plug. To replace the glow plug, please follow these steps:
1. Open the grill lid and shutdown the grill by pushing and holding the dial or using the main menu. Wait until the grill has completed the shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or turn it off during the shutdown procedure.
2. Once the grill has completed the shutdown procedure, power off the grill (A) and unplug from power source.
3. Open the grill lid and remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the cookbox. (B).
4. From the rear of your SMOKEFIRE grill, remove the rear access panel by removing four screws (C).
5. Unplug the glow plug assembly wire by pinching and pulling the quick disconnect plug (D).
6. Carefully remove the glow plug assembly by removing the bracket
B
screw that holds it in place and sliding the assembly out from the
grill (E).
7. Remove the glow plug from the glow plug assembly by pulling it out and away (F).
8. Install the replacement glow plug into the glow plug assembly by firmly pushing it into the socket (G).
9. Carefully reinstall the glow plug assembly straight through the back of the grill, and secure it in place by tightening the bracket screw (H).
NOTE: Be sure that the tip of the glow plug has been properly installed by visually inspecting the glow plug at the bottom of the burn pot inside the cookbox. The tip of the glow plug must be inserted through the pellet grate for proper operation (I).
10. Reconnect the glow plug assembly wire connector (J).
11. Reinstall the rear access panel (K).
12. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
C
grates inside the cookbox. (L).
13. Plug the power cord into the grill located underneath the hopper, then plug the grill into a power source.
14. Power on the grill and confirm replacement of the glow plug within the main menu settings of the controller.
D
28
TROUBLESHOOTING
E
I
F
J
G
K
H
L
29 weber.com
TROUBLESHOOTING
Symptom
Grill will not power on
Cause / Actions
If the grill will not power on: 1. Check that the power cord is securely
plugged into the grill and into a power source. 2. If your grill is using a
GFCI outlet, reset the device. 3. If the grill will still not power on after
you have completed the above checks, it is likely that the fuse has blown. See
the following instructions on how to replace the grill’s fuse. 4. If the grill
will not power on after all steps have been followed, contact the Customer
Service Representative in your area using the contact information on our
website.
Inside of grill lid appears to have peeling paint
The flakes you see are accumulated cooking vapors that have turned into
carbon. This happens over time after repeated use of your grill. This is not a
defect.
Using a grill brush or the included grill scraper, gentley scrub and clean the
carbon flakes off of the lid and cookbox. Wipe clean with a soft cloth or
paper towel.
CALL CUSTOMER SERVICE
If you are still experiencing any problems, contact the Customer Service
Representative in your area using the contact information on weber.com.
REPLACEMENT PARTS
To obtain replacement parts, contact the local retailer in your area or log
onto weber.com.
30
Fuse Replacement
If your SMOKEFIRE grill is non-responsive even after securing all electrical
connections, it is possible that the grill’s fuse has blown. The grill’s power
supply utilizes a 5 Amp, 120 Volt Cartridge Fuse. This simple and inexpensive
part can be easily replaced with the following instructions:
CAUTION: Only use the properly sized and rated fuse when replacing. Failure to
do so will void your warranty. The correct fuse is:
1.6A, 250V
1. Make sure that the grill is completely cool, then power off and unplug the
grill from the power source (A).
2. The fuse is installed inside the fuse holder located on the underside of
the hopper. Use a flathead screwdriver to gently pry open the fuse holder and
remove the fuse (B).
NOTE: WEBER recommends replacing the fuse if there is suspicion of failure.
3. Install a new fuse into the fuse holder and reinstall the fuse holder into
the power module (C).
CAUTION: Make sure the fuse holder is fully installed and closed before
operating your grill.
4. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics.
TROUBLESHOOTING
A
B
C
31 weber.com
MAINTENANCE
Recommended Cleaning
In order to keep your WEBER SMOKEFIRE grill running smoothly for years of
barbecuing and smoking, WEBER recommends a thorough cleaning of the grill
after 20 hours of cooking or after every 12 cooks. Additional cleaning may be
required after the completion of low & slow cooks, before beginning a high
temperature cook, to remove fatty deposits not burned off at low temperatures.
WARNING: ALWAYS MAKE SURE THE GRILL IS COMPLETELY COOLED AND UNPLUGGED FROM A
POWER SOURCE BEFORE PERFORMING ANY MAINTENANCE OR CLEANING.
CAUTION: NEVER SPRAY THE GRILL WITH A STEADY WATER STREAM SUCH AS FROM A
GARDEN HOSE OR POWER WASHER. ELECTRONIC COMPONENTS COULD BECOME DAMAGED.
CAUTION: WEBER recommends the use of barbecue mitts or rubberized gloves to
protect your hands while cleaning your grill.
Please follow these steps for cleaning your grill:
1. Once your grill has completed a proper shut down and completely cooled,
power off the grill and unplug from the power source.
2. Open the grill lid and brush or scrape the lid clean with a grill brush or
the included scraper.
3. While in place, brush or scrape the cooking grates clean, then remove them
from the cookbox and set aside.
4. While the FLAVORIZER bars and heat diffuser are in place, brush or scrape
them clean, then remove them from the cookbox and set aside.
5. Hold the heat baffle steady with one hand and brush or scrape clean with a
grill brush or scraper with the other hand. Then remove from the cookbox and
set aside.
6. Brush or scrape the interior of the cookbox with a grill brush or scraper.
Direct all of the grease and debris towards the vents in the bottom of the
cookbox, and into the disposable drip pan.
7. Using the included scraper or a soft bristle brush, clean out the burn
pot, pushing any remaining ash or debris through the pellet grate at the
bottom of the burn pot.
8. Remove the ash and grease system drawer to clean out ash and replace the
disposable drip pan. In addition, clean the inside of the ash and grease
system housing to prevent a buildup of ash that could stop the drawer from
fully closing. Once the drawer and housing have been cleaned, reinstall the
drawer.
WARNING: DO NOT REMOVE THE ASH AND GREASE SYSTEM DRAWER WHILE OPERATING THE
GRILL, OR IF STILL HOT AFTER SHUTDOWN. Frequently replace the disposable drip
pan before igniting the grill to reduce the risk of a grease fire.
9. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox.
Annual Engine Cleaning
Every 12 months, your SmokeFire grill should have a thorough engine cleaning
performed in order to ensure proper grill operation.
WARNING: ALWAYS MAKE SURE THE GRILL IS COMPLETELY COOLED AND UNPLUGGED FROM A
POWER SOURCE BEFORE PERFORMING ANY MAINTENANCE OR CLEANING.
CAUTION: NEVER SPRAY THE GRILL WITH A STEADY WATER STREAM SUCH AS FROM A
GARDEN HOSE OR POWER WASHER. ELECTRONIC COMPONENTS COULD BECOME DAMAGED.
CAUTION: WEBER recommends the use of barbecue mitts or rubberized gloves to
protect your hands while cleaning your grill.
Please follow these steps for cleaning your SmokeFire engine:
32
1. Once your grill has completed a proper shut down and completely cooled,
power off the grill and unplug from the power source.
2. Remove the rear access panel located at the rear of the grill.
3. Unplug the glow plug electrical connection, remove the glow plug assembly,
and set it aside.
4. Open the grill lid and remove the cooking grates, FLAVORIZER bars, and
heat baffle from the cookbox.
5. Remove the 2 screws that secure the pellet slide to the top of the burn
pot, and remove the pellet slide from the cookbox.
6. Remove the burn pot and pellet grate from the cookbox.
7. Using the included scraper or a soft bristle brush, clean the burn pot
area by brushing or scraping any ash or debris down the vent into the ash and
grease managment system.
NOTE: Be sure to thoroughly clean any built up ash and debris that may have
occurred during grill operation.
8. Reinstall the pellet grate, burn pot, and pellet slide. Be sure to
reinstall the two screws that secure the pellet slide to the top of the burn
pot.
9. Reinstall the glow plug assembly through the rear of the grill.
NOTE: Visually inspect that the tip of the glow plug is installed properly
through the pellet grate located at the bottom of the cookbox. If it is not
through the pellet grate, you must remove the glow plug assembly again to
adjust and reinstall it.
10. Reconnect the glow plug assembly electical connection.
11. Reinstall the rear access panel located at the rear of the grill by
securing four screws.
12. Reinstall the heat baffle, FLAVORIZER bars, and cooking grates inside the
cookbox.
Cleaning the Exterior of the Grill
The outside of your grill may include stainless steel, porcelain enameled, and
plastic surfaces. WEBER recommends the following methods based on the surface
type.
Cleaning Stainless Steel Surfaces
Clean stainless steel using a non-toxic, non-abrasive stainless steel cleaner
or polish designed for use on outdoor products and grills. Use a soft, lint-
free cloth to clean in the direction of the grain of the stainless steel. Do
not use paper towels.
CAUTION: Do not risk scratching your stainless steel with abrasive pastes.
Pastes do not clean or polish. They will change the color of the metal by
removing the top chromium oxide film coating.
Cleaning Painted, Porcelain-Enameled Surfaces and Plastic Components
Clean painted, porcelain-enameled and plastic components with warm soapy water
and a soft, lint-free cloth. After wiping down the surfaces, lightly rinse and
dry thoroughly.
Cleaning the Outside of Grills that are in Unique Environments
If your grill is subject to a particularly harsh environment, you will want to
clean the outside more often. Acid rain, pool chemicals, and salt water can
cause surface rusting to appear. Wipe down the outside of your grill with warm
soapy water. Follow up with a light rinse and thorough drying. Additionally,
you may want to apply a non-abrasive stainless steel cleaner weekly to prevent
surface rust. Use only as directed.
GRILLMASTER TIPS
Cleaning the Temperature Probes
Your included temperature probes should be cleaned after every use to ensure
safe cooking practices. However, the temperature probes should never be
submerged in any type of liquid because it could damage them. WEBER recommends
gently wiping the temperature probes clean with warm soapy water and a soft
cloth or paper towel.
Wear Gloves
Always wear heat-resistant barbecue mitts or gloves when using your WEBER
SMOKEFIRE grill. Vents, handles, ash and grease system, and cookbox will all
get hot during the grilling process and can cause severe burns. Be sure to
keep your hands and forearms protected.
Preheat Your Grill
Preheating your grill with the lid closed prepares the cooking grates and
internal cookbox temperature for grilling. The heat loosens any bits and
pieces of food hanging onto the cooking grates, making it easy to clean them
off with a grill brush or wood scraper. Preheating your grill also gets the
cooking grates hot enough to sear properly and also helps prevent food from
sticking to them.
CAUTION: When using a stainless steel bristle grill brush, be sure to check
for loose bristles. Replace the brush if any loose bristles are found on
cooking grate or brush.
Put A Lid On It
It is important to remember to always cook with your grill lid closed. This
will keep your internal cookbox temperature where you want it to be and
throughly cook your food.
Mix It Up
There are many varieties of WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS like
Hickory, Apple, Cherry, and more. You can experiment by mixing different
flavors of pellets. Explore the possibilities.
Cook Time and Temperature
If you are grilling in a colder climate or in windy conditions, the cooking
times could be longer. These conditions will lower the grill’s temperature, so
always monitor your grill and use food temperature probes to ensure safe food
temperatures. Remember to keep the grill lid closed as much as possible during
cooking so the heat and smoke do not escape.
m WARNING! Always unplug the grill from a power source and wait for the grill
to completely cool before performing any maintenance or cleaning.
m WARNING! Never spray the grill with a steady water stream such as from a
garden hose or power washer. Electronic components could become damaged.
m WARNING! Over time, the development of rough surfaces can form on the heat
baffle, FLAVORIZER bars, heat diffuser, and cooking grates. Wearing protective
gloves is recommended when handling these parts.
m WARNING! Do not clean the heat baffle, FLAVORIZER bars, heat diffuser, or
cooking grates in a sink, dishwasher, or self-cleaning oven.
m WARNING! Do not place any grill parts onto the side table as they may
scratch the stainless steel.
m WARNING! Do not use any of the following to clean your grill:
· Abrasive stainless steel polishes or pastes
· Cleaners that contain acid, mineral spirits or xylene
· Oven cleaner
· Abrasive cleansers or pads
33 weber.com
REPLACEMENT PARTS
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19
20 21 22
23 21
34
Use only genuine WEBER replacement parts for any repair or replacement.
Visit weber.com
SmokeFire – EX4 – US 040320
24 25 26 27 28
29
30
31 32
33
34
1 2 3 4
35
36
37
38
39 40
41 42
43 44
45 46
47 48 49
50
51 52
23
53 54
Use only genuine WEBER replacement parts for any repair or replacement.
Visit weber.com
1
2 3 4 5 6 7 8 9
10
11 12 13 14 15 16
17 18 19
20 21 22
23 21
REPLACEMENT PARTS
SmokeFire – EX6 – US 040320
24 25 26 27 28
29
30 31 32
33
1 2 3 4
1 2 3 4
34 35 36
37
38 39 40
41 42
43 44 45 46
47 48 49 50 51
52
23
53
54
35 weber.com
FCC Compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the
manufacturer, dealer or an experienced radio/TV technician for help. Changes
or modifications not expressly approved by Weber could void the user’s
authority to operate this device. FCC Radio Frequency (RF) Exposure: This
equipment complies with FCC and ISED Canada radiation exposure limits set
forth for an uncontrolled environment. The user should avoid prolonged
exposure within 20cm of the antenna, which may exceed the FCC or RSS-102 radio
frequency exposure limits. IC Compliance: This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions: (1) This device may not cause interference; and (2)
This device must accept any interference, including interference that may
cause undesired operation of the device. IFETEL Compliance: Operation of this
unit is subject to the following two conditions: (1) this unit or device may
not cause harmful interference, and (2) this unit or device must accept any
interference, including interference that may cause undesired operation.
ULC/ORD-C2728 2013 UL2728A 2019 EN 1860-1:2017 EN 55014-1:2017 EN 55014-2:2015
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc. Android is a
trademark of Google LLC. Google Play and the Google Play logo are trademarks
of Google LLC. The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Weber-Stephen
Products LLC is under license. Other trademarks and trade names are those of
their respective owners. © 2020 Designed and engineered by Weber-Stephen
Products LLC, 1415 S. Roselle Road, Palatine, Illinois 60067 USA.
WEBER-STEPHEN PRODUCTS LLC www.weber.com
© 2020 Designed and engineered by Weber-Stephen Products LLC, 1415 S. Roselle
Road, Palatine, Illinois 60067 USA.