Shelly Wifi Door Window Sensor User Guide

: June 9, 2024
: Shelly

Table of Contents

Shelly Wifi Door Window Sensor
Read before use
Product Introduction
Specification
Installation Instructions
Declaration of conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shelly Wifi Door Window Sensor

Shelly-Wifi-Door-Window-Sensor-product

Read before use

This document contains important technical and safety information about the device, its safety use and installation.

CAUTION! Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Allterco Robotics EOOD is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide.

Product Introduction

Shelly® is a line of innovative microprocessor-managed devices, which allow remote control of electric circuits through a mobile phone, tablet, PC, or home automation system. Shelly® devices can work standalone in a local Wi-Fi network or they can also be operated through cloud home automation services. Shelly Cloud is a service that can be accessed using either Android or iOS mobile application, or with any internet browser at https://home.shelly.cloud/. Shelly® devices can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet. Shelly® devices have embedded Web Interface accessible at http://192.168.33.1 when connected directly
to the device access point, or at the device IP address on the local Wi-Fi network. The embedded Web Interface can be used to monitor and control the device, as well as adjust its settings. Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Allterco Robotics EOOD. For more information, please visit:https://shelly- api-docs.shelly.cloud/#shelly-family-overview. Shelly® devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Allterco Robotics EOOD will provide the updates free of charge through the device-embedded Web Interface or Shelly Mobile Application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is the user’s sole responsibility. Allterco Robotics EOOD shall not be liable for any lack of conformity of the device caused by the failure of the user to install the provided updates in a timely manner.

Control your home with your voice
Shelly® devices are compatible with Amazon Alexa and Google Home supported functionalities. Please see our step-by-step guide on: https://shelly.cloud/support/compatibility/.

Initial Inclusion
If you choose to use the Device with the Shelly Cloud mobile application and Shelly Cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly App can be found in the “App Guide”. The Shelly Mobile Application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used stand-alone or with various other home automation platforms and protocols.

CAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the Devices for remote control of Shelly (mobile phones, tablets, PCs) away from children. Shelly® Door/Window Sensor main function is to indicate opening or closing of door or window, depending on where it is placed. The sensor can alert on open/close status of the door/window, or even alert to an opening attempt. The device is additionally equipped with LUX sensor and vibration alert*, and can be used as action trigger to other devices for your home automation. Shelly® Door/Window is battery powered device and may work as a standalone device, or as an addition to a home automation controller.

Some features will be available after device firmware update.

Specification

Battery Type: 2 x 3 V CR123A batteries (Batteries not included)
Estimated battery life: Up to 2 years
Temperature meas. range: -10°C÷50°C (± 1°C)
Working temperature -10°C÷50°C
Max RF output power: 12.71 dBm
Radio protocol Wi-Fi 802.11 b/g/n
Frequency: 2412-2472 МHz; (Max. 2483.5 MHz)
Dimensions:
- Sensor 82x23x20 mm
- Magnet 52x16x13 mm
Operational range (depending on local construction):
- up to 50 m outdoors
- up to 30 m indoors
Electrical consumption
- “Sleep” mode ≤10 μA
- “Awake” mode ≤60 mA

Installation Instructions

CAUTION! Use the Device only with batteries which comply with all applicable regulations. Inappropriate batteries may cause a short circuit in the Device, which may damage it.
CAUTION! Do not allow children to play with the device, espe-cially with the Power Button. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.

Batteries placement and Button controls (fig.1)
To open the device, remove the back cover and insert the batter-ies inside. Remove the sticker on the back of each component and carefully place the device at the desired door or window. The distance between the two components of the device should be less than 5 mm when the door or window is in closed position (fig.2). Access the button through the small hole on the device, close to the LED indicator. Use pin to press the button. Press the Button to turn on AP mode of the device. LED indicator should flash slowly. Press the Button again, the LED indicator will turn off and device will be in „Sleep“ mode. Press and hold the button for 10 seconds for Factory Settings Reset. Successful factory reset turns on the LED indicator to flash slowly. Shelly-
Wifi-Door-Window-Sensor-fig-3

Additional Features
Shelly® allows control via HTTP from any other device, home automation controller, mobile app or server. For more information about the REST control protocol, please visit: https://shelly.cloud or send a request to support@shelly.cloud

Declaration of conformity

Hereby, Allterco Robotics EOOD declares that the radio equipment type for Shelly Door/Window is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://shelly.cloud/knowledge- base/devices/shelly-door-window-2/

Manufacturer: Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Web: https://shelly.cloud

Changes in the contact data are published by the Manufacturer at the official website of the Device https://shelly.cloud All rights to trademark Shelly®, and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.