GIANT Contact SLR Trail Integrated Handlebar User Manual

June 9, 2024
GIANT

GIANT Contact SLR Trail Integrated Handlebar

INTRODUCTION

Intended for mountain bikes with an integrated cockpit, a steerer diameter of 1 1/8″ and external cable routing.

INDEX PARTS SPEC QTY
1 Handle bar   1
2 Ti stem bolt M6x20mm 2
3 Top cap   1
4 Bolt M6x32mm 1
5 Top cover   1
6 Bolt M3x8mm 2
7A One piece sleeve 45mm/0° 1
7B Two pieces sleeve 40mm & 50mm/±3° 1
8A Angle spacer 45mm/0° 1
8B Angle spacer 40mm/-3° 1
8C Angle spacer 50mm/-3° 1
8D Angle spacer 50mm/+3° 1
8E Angle spacer 40mm/+3° 1
9 Mid spacer   6
10 Con spacer   1
11 Dust wiper   1
12 Height adjust spacer 40mm& 50mm/±3° 1
13 Camera mount   1
14 Bolt M3x8mm 1
15 GPS mount   1
16 Top cover for GPS mount   1

INSTALLATION

For full installation and safety instructions please use the QR codes below:

VIDEO TUTORIALS:
https://myagi-2.wistia.com/medias/1tkqskn1gj

WEB PAGE:
https://www.giant-bicycles.com/global/showcase/contact-slr-trail-integrated- bar

SPACER FOR MEASURING BEFORE CUTTING THE STEERER TUBE (40MM/50MM ±3°

EXCLUSIVE)

![Spacer For Measuring

Before Cutting The Steerer Tube

(40mm/50mm ±3° Exclusive)](https://manuals.plus/wp-content/uploads/2023/03 /GIANT-Contact-SLR-Trail-Integrated-Handlebar-User-Manual-7.png)

GPS MOUNT INSTALLATION

Gps Mount Installation

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals