Jackery Explorer 1500 Pro Portable Power Station User Manual
- June 9, 2024
- Jackery
Table of Contents
Explorer 1500 Pro Portable Power Station
User Manual
Explorer 1500 Pro Portable Power Station
Contact us:hello@jackery.com
Version: JAK-UM-V1.0
Model: JE-1500B
More language versions are supported.
Other language versions of the manual can be downloaded on our official
website: https://de.jackery.com/pages/user-guides
Congratulations on your new Jackery Explorer 1500 Pro. Please read this manual
carefully before using the product, particularly the relevant precautions to
ensure proper use. Keep this manual in an accessible place for frequent
reference.
In compliance with laws and regulations, the right of final interpretation of
this document and all related documents of this product resides with the
Company.
Please note that no further notifications will be given in case of any update,
revision or termination.
TECHNICAL SPECIFICATIONS
Product Name: | Jackery Explorer 1500 Pro |
---|---|
Model No.: | JE-1500B |
Capacity: | Lithium-ion 35Ah / 43.2V DC(1512Wh) |
Dimensions: | 38.4×26.9×30.75cm / 15.12×10.59×12.11 in |
weight: | About 17kg / About 37.48 lbs |
Lifecycles: | 1000 cycles to 80% + capacity |
2 x AC Output: | 230V ~ 50Hz, 7.83A, 1800W Rated, 3600W Surge peak |
2 x USB-A Output: | Quick Charge 3.0, 18W Max 5-6V⎓3A,6-9V⎓2A,9-12V⎓1.5A |
2 x USB-C Output: | 100W Max 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓5A |
Car Port: | 12V⎓10A |
AC Input: | 230V ~ 50Hz, 5.65A Max |
DC Input: | 11V-17.5V⎓8A Max, Double to 8A Max |
17.5V-60V⎓12A, Double to 24A / 1400W Max
Charge Temperature:| 0~40 °C (32~104 ℉)
Discharge Temperature:| -10~40 °C (14~104 ℉)
CERTIFICATIONS:
UN38.3
Qualcomm quick charge 3.0
※ USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
※ Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm and Quick Charge are trademarks or registered trademarks of Qualcomm
Incorporated.
PACKAGE LIST
| Jackery Explorer 1500 Pro
---|---
| Car Charge Cable
| AC Charge Cable
| DC7909 To DC8020 Adaptor x 2
| Quick Start Guide
GET TO KNOW YOUR GEAR
Product Appearance
LCD DISPLAY
1 | Input Power | 2 | Remaining Charge Time | 3 | Solar Charging Indicator |
---|---|---|---|---|---|
4 | AC Wall Charging Indicator | 5 | Car Charging Indicator | 6 | Low Battery |
Indicator
7| Remaining Battery Percentage| 8| Output Power| 9| Remaining Discharge Time
10| Error Code| 11| High Temperature Warning| 12| Low Temperature Warning
13| Low Power Mode| 14| AC Power Indicator| 15| Battery Power Indicator
Battery Power Indicator
When the product is being charged, the orange circle around the battery
percentage will light up in sequence. When charging other devices, the orange
circle will stay on.
Low Battery Indicator
When the battery is less than 20%, the Low Battery Indicator will stay on.
When less than 5%, the Low Battery Indicator will flash. When it is being
charged, the Indicator will be off.
Low Power Mode
To avoid forgetting to turn off the output during use that results in battery
consumption, the product turns the Low Power Mode off by default. This occurs
when no device is connected or the connected device is less than or equal to a
certain value. (Refer to the table below for more details), the device will
automatically shut down after 12 hours.
Output | Output Power | Defaults |
---|---|---|
AC Output | ≤25W | The device will automatically shut down after 12 hours. |
USB Output | ≤2W | |
Car Output | ≤2W |
To turn on the Low Power Mode
Long press the AC Button and DISPLAY Button until the Low Power Mode icon
lights up. In Low Power Mode, please remember to turn off the output to avoid
battery consumption.
To turn off the Low Power Mode
Long press the AC Button and DISPLAY Button until the Low Power Mode icon
disappears on the screen.
Fault code
In order to quickly solve the user’s feedback, we set up common fault codes
F0-F9 in the system: if you find any fault code of F0、F1、F2、F3、F4、F5、F6、F7 on
the display screen, please contact us for after-sales treatment; If F6 code
appears, please remove the load or unplug the charging plug, the product can
restore by itself, if not, please contact after-sales treatment; If F9 fault
code appears, please remove the load and the product can recover by itself, if
not, please contact after-sales service.
High-temperature warning
If it appears on the screen, do not worry, the battery will restore
automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore
after the ambient temperature is restored.
BASIC OPERATIONS
Power On/Off
AC Output On/Off: Press the AC Button, the AC Output operation indicator
lights up. Then you can connect the equipment that needs AC charging. Press
the AC Button again to turn off the AC Output.
USB Output On/Off: Press the USB Button, the USB Output operation indicator
lights up. Then USB-A and USB-C Output Ports can be connected to external load
devices. Press the USB Button again to turn off the USB Output.
Car Port On/Off: Press the Car Port Button, the Car Port operation indicator
lights up. Then the Car Port can be connected to the external load devices.
Press the Car Port Button again to turn off the output.
LCD Screen On/Off
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light
Button. Or, when there’s a charging input, the screen display will light up
automatically.
To Turn Off, press the DISPLAY Button again and the screen display will turn
off. Or, if there is no operation in 30 seconds, the product will enter a
sleep state and the screen display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow
these steps: After the display screen lights up, double-click the DISPLAY
Button and the mode of Always-On Display will be on.
To turn off Always-On Display, follow these steps: Press the DISPLAY Button
and the screen will be turned off in 30 seconds.
Tip: During Always-On mode, the screen automatically turns off after 2 hours
without charging or discharging.
LED Light On/Off
There are three modes of LED Light: Low Light mode, Bright Light mode, and SOS
mode.
The operations are as follows: Press the LED Light Button, the LED will be
turned on. The light will always turn on in Low Light mode and the output
power on the screen is 1W. Press again to enter the Bright Light mode and the
output power on the screen is 3W. Press the third time to enter the SOS mode
and the output power on the screen is 3W. Then, press again to turn off the
LED Light. In any of these modes, the light can be turned off by a long press.
CHARGING YOUR JACKERY EXPLORER 1500 PRO
Green energy first: We advocate to use the green energy first. This product
supports two modes of charging at the same time: solar charging and AC wall
charging.
When AC wall charging and solar charging are turned on at the same time, the
product will give priority to solar charging and both methods will be used to
charge the battery at the maximum permissible power.
CHARGING FROM THE WALL
Please use the AC cable included in the package.
SOLAR ENERGY CHARGING
Jackery Solar Saga 200 or 100 or 60 Solar Panel Connection Guide
If one or two solar panels are connected, you can directly connect the DC8020
port of the solar panel to the DC8020 port of Jackery Explorer 1500 Pro for
charging. If three or four solar panels are connected, please refer to the
method shown in the following figure to charge through the solar series
connector ( Note: The solar series connector is not in standard
configuration, so you need to purchase it separately. Please refer to the
detailed operation instructions of the solar series connector before using
it.)
Caution: When the two inputs are used
at the same time, please make sure to use the same type of solar panel and the
number of solar panels in the two inputs must be the same to avoid damage or
charging problems of the equipment due to inconsistent voltages of the two
channels.
The following way of connections are prohibited to charge this
product:
Jackery Solar Saga 80 Solar Panel Connection Guide
Users who have purchased Jackery Solar Saga 80 can charge the product by
referring to the connection mode shown below. The Jackery Solar Saga 80
supports the parallel connection or the parallel and then series connections
to charge the product. The single input port of the Jackery Explorer 1500 Pro
supports the input of up to six pieces of Solar Saga 80 solar panels, and two
input ports support the input to up to 12 pieces of Solar Saga 80 solar
panels. (When the power is connected with six solar panels in a single input
port, the solar panels shall be divided into two groups, and each group of
three solar panels shall be self-connected in parallel and then connected to
Jackery Explorer 1500 Pro through the solar series connector. The solar series
connector needs to be purchased separately.) For detailed operation
instructions on the self-parallel connection of the Jackery Solar Saga 80
solar panel, please refer to the user manual.
Warm Tip: Users can enter the number of solar panels in their own
combination according to the number of solar panels they purchased. Currently,
the product supports charging with 1, 2, 3, 4, 5, 6, 8, and 12 80W solar
panels in combination.
DC7909 to DC8020 Adaptor Operation Guide
All of our solar panels on sale have been upgraded to include a DC7909 to
DC8020 adapter. If you have purchased a Jackery solar panel without a DC7909
to DC8020 adapter, you can charge your Jackery Explorer 1500 Pro by following
the connection instructions below.
CHARGING IN THE CAR
This product can be charged with a 12V car charger. Please start the vehicle before charging to prevent draining the car battery and prevent your vehicle from being unable to start.![Jackery Explorer 1500 Pro Portable Power Station
- Figure 5](https://manuals.plus/wp-content/uploads/2023/03/Jackery- Explorer-1500-Pro-Portable-Power-Station-Figure-5.jpg)
Meanwhile, please ensure that the car charger and the car cigarette lighter
provide a good connection, and ensure that the car charger is fully inserted.
In addition, if the vehicle is running on bumpy roads, it is forbidden to use
the car charger in case it burns due to a poor connection. The Company will
not be responsible for any loss caused by non-standard operation.
Safety Precautions When Charging
- Vehicle charging is only applicable in 12V vehicles, not in 24V ones. Please do not charge this product in 24V vehicle to avoid personal injury and property loss.
- It is recommended to use Jackery accessories – solar panels for solar charging. We will not be responsible for the losses caused by using other brands’ solar panels.
SAFETY PRECAUTIONS WHEN USING
The basic safety precautions should be followed when using this product,
including:
a. Please read all instructions before using this product.
b. Close supervision is required when using this product near children to
reduce the risk.
c. Risk of electric shock may occur if using accessories recommended or
sold by non-professional product manufacturers.
d. When the product is not in use, please unplug the power plug from the
product’s socket.
e. Do not dismantle the product, which may lead to unpredictable risks
such as fire, explosion or electric shock.
f. Do not use the product through damaged cords or plugs, or damaged
output cables, which may cause electric shock.
g. Charge the product in a well ventilated area and do not restrict
ventilation in any way.
h. Please put the product in a ventilated and dry place to avoid rain and
water to cause electric shock.
i. Do not expose the product to fire or high temperature (under direct
sunlight or in vehicle under high heat), which may cause accidents such as
fire and explosion.
WARRANTY
Note: We only provide our warranty for the buyer who purchased on Amazon
(Jackery Inc), Jackery website or local authorized dealers.
Limited Warranty
Jackery Inc. warrants to the original consumer purchaser that the Jackery
product will be free from defects in workmanship and material under normal
consumer use during the applicable warranty period identified in the ‘Warranty
Period’ section below, subject to the exclusions set forth below. This
warranty statement sets forth Jockey’s total and exclusive warranty
obligation. We will not assume, nor authorize any person to assume for us, any
other liability in connection with the sale of our products.
Warranty Period
3 Years Standard Warranty: The standard warranty period for Jackery
Explorer 1500 Pro is 36 months.
In each case, the warranty period is measured starting on the date of purchase
by the original consumer purchaser. The sales receipt from the first consumer
purchase, or other reasonable documentary proof, is required in order to
establish the start date of the warranty period.
2 Years Extended Warranty: To activate the Warranty Extension, you must
register your product online or contact our customer service team at
hello@jackery.com to extend the standard warranty
runtime.
Exchange
Jackery will replace (at Jockey’s expense) any Jackery product that fails to
operate during the applicable warranty period due to defect in workmanship or
material. A replacement product assumes the remaining warranty of the
original product.
Limited to Original Consumer Buyer
The warranty on Jockey’s product is limited to the original consumer purchaser
and is not transferable to any subsequent owner.
Exclusions
Jockey’s warranty does not apply to:
Misused, abused, modified, damaged by accident, or used for anything other
than normal consumer use as authorized in Jockey’s current product literature.
Attempted repair by anyone other than an authorized facility.
Any product purchased through an online auction house.
Jockey’s warranty does not apply to the battery cell unless the battery cell
is fully charged by you within seven days after you purchase the product and
at least once every 6 months thereafter.
JACKERY UK LTD
SUITE B FAIRGATE HOUSE, 205 KINGS ROAD , TYSELEY ,
BIRMINGHAM , UNITED KINGDOM , B11 2AA
Jackery Technology GmbH
Str. 70 FRANKFURT 60528 Germany
E-mail: hello@jackery.com
Website: www.jackery.com
References
- 华宝新能
- Jackery Best Solar Generator, Portable Power Station & Solar Panels
- Benutzerhandbuch – Jackery Deutschland