PHILIPS Ultinon Pro H7-LED Car Head Light Installation Guide
- June 9, 2024
- Philips
Table of Contents
PHILIPS Ultinon Pro H7-LED Car Head Light
QR/CODE
Attention
Please check car installation manual and follow instructions for lamp replacement.
H7-LED
Variant 1 (spring)
Option 1 (spring)
Option 2 (spring clip)
Option 3 (centering ring)
Please check the allowed scope of application with the compatibility of your vehicle
Car model/Adapter ring type
-
1 “abc”
-
2 …
Detailed Information in the specific installation instructions of the adapter
H7-LED CANbus
Please check the allowed scope of application with the compatibility of your vehicle.
Car model/CANbus type
-
1 “xyz”
-
2 …
Detailed Information in the specific installation instructions of the CANbus.
General instructions – ABG certificate
How to get general type approval (ABG) for use in your vehicle on public roads:
- Scan the QR code on the top of the packaging to authenticate the product. www.philips.cz/LEDshomologace
- Print out the approval document (ABG).
- You are responsible to comply with all applicable legal requirements.
General instructions – Left-hand traffic
This LED replacement light source is only approved for right-hand traffic. Before entering a country with left-hand traffic, the LED lamp must be replaced by a halogen lamp. Please check car installation manual and follow instructions for lamp replacement.
Installation
The LED light source, cables and components must be mounted in a way that the headlamp won‘t be damaged and that its function is maintained. All parts must be fixed safely. Check correct position and safe fixation of LED lamp within the lamp holder The replacement of the lamp in the headlamp requires inspection and eventually adjustment of headlamp setting by a qualified garage.
Safety
- The replacement of the halogen lamp by an LED light source may affect the deicing and defogging behavior of the headlamp
- The LED light intensity is very high while turned on. Do not look directly into the beam to avoid damage to the eyes.
- Please wear safety glasses while replacing halogen lamps
- Lamps will heat up during operation. Do not touch. Please let it cool down in order to avoid potential injury due to contact with hot surface
- Please wear safety gloves to avoid injuries during mounting
- Keep out of reach of children.
Lumileds is the warrantor of this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. © 2023 Lumileds Holding B.V. All rights reserved.