behringer GO VIDEO Professional Video Production Microphone Kit User Guide
- June 9, 2024
- Behringer
Table of Contents
behringer GO VIDEO Professional Video Production Microphone Kit User Guide
Safety Instruction
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. -
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat. -
Use only attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. -
Correct disposal of this product:
This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law.
This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE).
The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE.
At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources.
For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. -
Do not install in a confined space, such as a book case or similar unit.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
Features
- Premium microphone kit for high-quality videography on-the-go
- Excellent choice for vlogs, podcasts, interviews, live-streaming, field recordings and more
- Noise-canceling capsule eliminates background noise
- High-resolution 32-bit / 96 kHz audio codec
- Zero-latency direct monitoring headphone output
- Tripod with tilting neck for easy positioning
- Extension for recording selfie videos
- Multi-device compatibility via adjustable smartphone clamp
- USB-A and USB-C connection cables for computer and smartphone
- Customized foam windscreen and durable carry case included
Accessories List
- Tripod with smartphone holder
- USB connection cables
- Zipper case
Basic on-the-go setup
To set up the basic configuration, follow these steps:
-
Gently screw down the smartphone holder onto the tripod’s threaded mounting point until secure.
-
Attach microphone clip with the smartphone holder’s shoe mount and twist the nut until secure.
-
Adjust the smartphone holder to fit your smartphone by loosening the rear knob.
Re-tighten the rear knob to secure the smartphone in place. -
Insert the microphone body into the microphone clip and place the windscreen over the microphone capsule.
-
Connect the smartphone with the microphone with Type-C cable.
Selfie video setup
When recording selfie videos that require extra height for your smartphone, install the selfie rod by following these setup steps:
- Gently screw down the selfie rod onto the tripod’s threaded mounting point until secure.
- Gently screw down the smartphone holder onto the selfie rod’s threaded mounting point until secure.
- Complete the rest of the setup as described in Steps (2) – (5) of the Basic on-the-go setup.
Specifications
| Capsule type | Dual condenser |
|---|---|
| Capsule size | 10 mm (0.4″) |
| Polar pattern | Cardiod, bi-directional |
| Frequency range | 50 Hz to 16 kHz |
| Max. SPL | 115 dB |
| A/D conversion | 32-bit / 96 kHz |
| Sensitivity | -32 dB (±3 dB), 0 dB = 1 V/Pa @ 1 kHz (cardioid) |
-36 dB (±3 dB), 0 dB = 1 V/Pa @ 1 kHz (bi-directional)
Signal-to-noise ratio| 65 dB
Headphone out| 3.5 mm (1/8″) TRS, stereo
Interface connector| USB, type C
Cable length| 1.2 m (4.0 ft)
Accessories| Tripod, USB connection cables
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein.
Technical specifications, appearances and other information are subject to
change without notice.
All trademarks are the property of their respective owners.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC
Helicon, Behringer, Bugera,
Aston Microphones and Coolaudio are trademarks or registered trademarks of
Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2022 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at: community.musictribe.com/pages/support#warranty
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1,
8th Floor NY, NY 10168,
United States
Email Address: legal@musictribe.com
GO VIDEO KIT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU,
Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at:
https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>