FS TA1910-4GVC-W High End Integrated Broadband Access Device User Manual

TA1910-4GVC-W User Manual

TA1910-4GVC-W User Manul

1.1 Introduction
TA1910-4GVC-W is a high-end integrated broadband access device that is flexible and user-friendly, conforming to the IEEE802.11b/g/n and 802.11a/n/ac standards. It can provide high-performance broadband access services for home users and individual businesses. Its main characteristics:

• Comply with ITU-T G.984/988 standard and adopt GPON uplink;
• Set and monitor the device through the WEB page;
• Remote configuration and management through TR069 protocol;
• Set the network with NAT and DHCP and help users easily connect to the network;
• Strong firewall function;
• Customize the online security performance for your device with MAC and URL filter functions;
• Surf the internet by wireless.

1.2 Hardware Connection

Check the indicator status after connection.

system is not powered on.
PON| PON status indicator| Green| Oft. The ONU is not activated. On:The ONU has been activated. Flicker: The ONU is being activated.
LOSS| Optical signal indicator| Red| Off:The optical power is received normally.
Flicker: The received optical power is lower than the threshold of the optical receiver.
2AG| 2.4GWifil status indicator| Green| Oft The system is not powered on or the Wifi port is not connected to a network device.
On: The Wifi port is connected, but there is no data transmission.
Flicker: There is data transmission.
SG| SGwifi status indicator| Green| Off: The system is not powered on or the Wifi port is no: connected to a network device.
On: The Wifi port is connected, but there iz no data transmission.
Flicker:There is data transmission.
LAN1-4| Ethernet port status indicator| Green| Off: The system is not powered on or the Ethernet port does not connect to the terminal.
On: The Ethernet port has been connected, but there is no data transmission.
Flicker:There is data transmission through the port.
FXS1-2| Voice port status indicator| Green| Oft The system is not powered on or the voice port is not registered.
On: The voice port is registered successfully, but there is no data transmission.
Flicker: There is data transmission on the voice port.
WPS| WPS status indicator| Green| Off: The system is not powered on or the WPS is not enabled.
Flicker:The WPS connection is ongoing.
On:The WPS connection is successful.
LOOP| Loop status indicator| 3| Oft The system is not powered on or there is no loop on the port. On:The Ian port has a loop.
CAN| Optical signal receiving indicator| 3| On:The input optical power is lower than -1 SdBm. Flicker:The input optical power is higher than 3dBm. Off:The device is not powered on.
CAN| Optical signal receiving indicator| Green| On:The input optical power is between -1SdBm and 3dBm.

Warning:

1. Make sure the device is put on a horizontal and flat surface.
2. To avoid thunder-strike, disconnect all power lines from the power supply in thunder and rainy days.
3. Make sure that the workshop is well-ventilated, the heat of electrical devices is well-discharged and sufficient air circulation is provided for device cooling.
4. Use the rated power adapter equipped with the device.

1.3 Computer Setting

1. Click “Start→Control Panel→Network and Internet→Network and Sharing Center→Local Area Connection”, select “Local Area Connection”, and click “Properties”.
2. Double click “Internet Protocol 4 (TCP/IPv4)” as shown in the following figure:
3. On the page of Internet Protocol 4 (TCP/IPv4) Properties, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, and then click “OK”.

1.4. Wizard Setting

1. Open the web browser, for instance: IE

2. Enter 192.168.123.1 in the address bar and click “Enter” to the the web interface. Then enter the UserName (user by default) and Password (123456 by default) respectively in the interface UserLogin.

3. After Login, click “Status” on top of the navigation. Click “Device Basic Info” on the left navigation bar.
   Basic information of the device is shown in the following page.

4. Click “WLAN” in “Network” to select whether to enable wireless. And you can also modify the wireless name, authentication mode and password.

5. Click “Apply Changes” to proceed to the next step.

1.5. System Wireless Setting
If you want to use the wireless network, please make sure your PC is equipped with the wireless adapter card, then do as following steps. Here takes Windows 7 System as an instance:

1. Select “Network” and “Properties”.
2. Click “Wireless Network Connection”.
3. Click the “Refresh” button, select the wireless network name of the terminal device, and double-click the name.
4. Enter the password and click “OK”.

Reset
Please reset your router if you forget its username and password. Reset method: Keep your router powered on and press the reset key “RESET” with a toothpick or a clip for 10 seconds and the router will reboot.
Caution:
The configuration parameters of the router will return to the default setting after reset. Please re-configure your router as your requirement.

1.6. User Tips

1. If there is WiFi signal on the PC but it cannot connect to the Internet,

1. check whether the WiFi name is the same with SSID of the wireless router;
2. check the strength of the wireless signal. Adjust the location of the wireless router, if the wireless signal is weak.
3. refresh the network list and re-connect to the WiFi;
4. consult the manufacturer of the notebook or wireless adapter card and re- connect according to the relevant guidelines;
5. Restart the PC.

2. If there is no WiFi signal on the laptop,

1. check whether the wireless adapter card is enabled;
2. check whether the driver of the wireless adapter card is successfully installed. If not, please reinstall;
3. check whether the WiFi function of the wireless router is enabled and access to SSID broadcast;
4. check whether the WiFi service is enabled. Right-click “My computer” on the desk of home screen (take Windows 7 as an example) and select “Management”. Then select “service and application program”, and select “service” after the page is unfolded. Find “WLAN AutoConfig” and ensure it is enabled;
5. check whether there is wireless signal if keep the laptop closer to the wireless router.
6. retry to connect other wireless adapter card if the above solutions are unsatisfactory. If not, reset the wireless router.

Warranty Statement

FS warrants that FS’s products contained in the original packaging against defects in materials and workmanship when used normally according to FS published specifications for a period of 1 year from the date of purchase as stated on your proof-of-purchase. The warranty is subject to following conditions:

1. The Warranty Certificate takes effect after being stamped by FS or the authorized distributor.
2. The Warranty Certificate is non-replicable and irrevocable, and there is no copy provided.
3. Should the product prove to be defective within the warranty period, return the product with its Warranty Certificate and sales invoice with its Serial Number, and FS will, at its option, repair or replace the product, to whatever extent FS deems necessary to restore the product to proper operating condition, without any charge to you.

The warranty does not cover damages to the product caused by:

1. Shipping or handling or other physical abuse of the product;
2. Repair or service to the product by anyone other than FS or technicians without FS’s authorization;
3. Using the equipment in an environment not meeting the product requirements;
4. Force majeure, such as thunder, floods or abnormal voltage;
5. Misapplication, misuse or inappropriate maintenance;
6. Natural wear and tear in use, such as worn-out hull and power supply;
7. Inconformity of serial number on the warranty certificate and the product, or the altered warranty certificate.

FS offers a paid maintenance service to the product out of warranty. If maintenance service is needed, please contact our local maintenance teams or call on our technical service hot line. FS reserves the rights to final interpretation of the
Product Warranty.

Warranty Certificate

Dear customer, thank you for choosing FS products. For better service, please fill in the following Warranty Certificate and keep it well.

Customer name|
---|---
Client address/Zip Code|
Phone number|
Model|
Serial number|
Date of Purchase|
Invoice No.|
Sales representative|
Sales address/Phone number|

The Warranty Certificate is non-replicable and irrevocable, please keep your Warranty Certificate safe.
Distributor: (stamp)
Trademark Notice
Other trademarks, product, service and company names mentioned are the property of their respective owners.
Disclaimer
Please note that the manual shown here are for reference purposes only. It does not constitute a legal contract or a commitment between FS and any person or entity. Although every effort has been made to ensure all the information in this manual is correct, inaccuracies or typographical errors may still occur. In no event shall FS be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the manual.
FS reserves the right to alter, update and otherwise change the information contained in the manual from time to time without notice.

References

• FS.com - HPC, Data Center, Enterprise, Telecom

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>