OLIGHT Array 2 USB-C Rechargeable LED Headlamp User Manual
- June 9, 2024
- OLIGHT
Table of Contents
OLIGHT Array 2 USB-C Rechargeable LED Headlamp
IN THE BOX
SPECIFICATIONS
- All above specifications are test results based on ANSI/NEMA FL1-2009 Standards. The tests are performed using the 1600mAh 3.6V battery pack integrated with the product.
SPECIFICATIONS (BATTERY PACK)
-
INPUT
5V 1A -
CHARGING METHOD
Constant Current -
MAXIMUM CHARGING CURRENT
1A -
FULLY CHARGED VOLTAGE
4.2V -
TIME TO FULLY CHARGE
Maximum: 2h(5V/1A)
PRODUCT OVERVIEW
BEFORE FIRST USE
Before your first use, please remove the protective film on the lens. The headlamp arrives in lockout mode for shipping purposes. To unlock, please press and hold the switch (over 1 second).
CHARGING
Before first use, please fully charge the battery pack. Remove the charging port protective cover, then connect the battery pack to the USB adapter or USB charging port via the provided USB A-C charging cable. The battery pack indicator will flow in red continuously while charging and it will fully light up once it is fully charged. After charging, please remove the cable and close the port cover.
NOTE:
- When the headlamp is on, the battery pack indicator will light up simultaneously for 3 seconds, and then it will flash continuously to remind the battery level.
- It comes without USB power source in the package, please note that it can be charged by PC or any other USB power source with output of 1A or above.
- It takes no more than 2 hours to fully charge the light (For reference only. When the USB power source is insufficient to provide 5V 1A power capacity, the charging time will be longer).
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the headlamp when it is on. The heat built-up may cause close objects to burn or even result in unexpected disasters.
WARNING
Keep out of reach of children.
NOTICE
If the headlamp is left unused or carried and transported, please lock it to
avoid accidentally activating the headlamp.
HOW TO OPERATE
- ON/OFF: Single press the headlamp switch to turn on/off, the default output is the last mode when turned off. (Please note: SOS is not memorized).
- CHANGE BRIGHTNESS LEVEL: When the headlamp is on, press and hold the switch to change brightness level. The output brightness will cycle through Low Medium→High→Low… until the switch is released.
- SOS: In the unlocked state, quickly triple click the switch to enter the SOS mode and single click to return the previous mode.
- LOCKOUT/UNLOCK: When the headlamp is off, press and hold the switch (over 1 second) to access the lockout mode. Under the lockout mode, press and hold the switch (over 1 second) to unlock. When unlocking, it will output low light.
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>