BLACK DECKER BXIR1000E Contact Grill Instruction Manual

: June 9, 2024
: Black Decker

Table of Contents

BLACK DECKER BXIR1000E Contact Grill
SAFETY ADVICE AND WARNINGS
DESCRIPTION
INSTRUCTIONS FOR USE
CLEANING
ANOMALIES AND REPAIR
WARRANTY AND TECHNICAL ASSISTANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK DECKER BXIR1000E Contact Grill

BLACK-DECKER-BXIR1000E-Contact-Grill-PRO

SAFETY ADVICE AND WARNINGS

The appliance must be used and rested on a flat, stable surface.
When the appliance is placed on its support, make sure that the surface on which it is placed is stable.
This is a travel iron and it is not intended or designed for regular use.
Never leave the appliance unattended while it is connected to the supply mains.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they are supervised.
Keep the appliance and its cord out of reach of children less than 8 years of when it is energised or cooling down.
This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance.
Do not use the appliance if it has been dropped, if there are visible signs of damage or if it has a leak.
Unplug the appliance from the mains before filling the water tank.
The temperature of the accessible surfaces may be high when the appliance is in use.
If the supply cord has been damaged, it must be replaced, take the appliance to an authorised technical support service. Do not attempt to disassemble or repair the appliance by yourself in order to avoid a hazard.
This appliance is for household use only, not professional, industrial use.
Ensure that the voltage indicated on the rating label and the voltage selected on the voltage selector matches the mains voltage before plugging in the appliance.
Connect the appliance to an earthed socket capable of delivering a minimum of 10 amperes.
The appliance’s plug must fit into the mains socket properly. Do not alter the plug. Do not use plug adaptors.
Do not use or store the appliance outdoors.
Do not leave the appliance out in the rain or exposed to moisture.
Do not pull on the supply cord. Never use the supply cord to lift up, carry or unplug the appliance.
Do not wrap the supply cord around the appliance.
Do not allow the supply cord to hang or to come into contact with the hot surfaces of the appliance.
Check the state of the supply cord. Damaged or tangled cables increase the risk of electric shock.
Do not touch the plug with wet hands.
Do not use the appliance if the supply cord or plug is damaged.
If the appliance enclosure breaks, immediately disconnect the appliance from the mains to prevent the possibility of an electric shock.
Do not touch the heated parts of the appliance, as it may cause serious burns.

Use and care:

Fully extend the appliance’s supply cord before each use.
Respect the MAX level indicator. (Fig.1).
Disconnect the appliance from the mains when not in use and before undertaking any cleaning task.
Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
Do not store or transport the appliance if it is still hot.
Keeping the iron in its housing support at maximum temperature for too long time, may cause its colour change, which will not affect the correct working order of the appliance.
For a correct operation, and to keep the soleplate in good condition, do not operate over metal objects (ironing board metal parts, buttons, zips etc.).
It is advisable to use distilled water, especially if the water in your area contains clay or if it is “hard” (containing lime or magnesium).
Check that the filling opening lid is closed properly before starting the appliance.
Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
Never rest the appliance on surfaces while in use.
Do not use the appliance on any part of the body of a person or animal.
Do not use the appliance to dry textiles of any kind.
Turning the temperature and steam flow regulator to minimum (MIN) setting does not mean that the iron is switched off. Disconnect from the mains to ensure the iron is switched off.

Service:

Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

DESCRIPTION

$BLACK-DECKER-BXIR1000E-Contact-Grill- $2$$

A Steam stroke button
B Filling opening
C Soleplate
D Pilot light
E Voltage selector
F Steam switch
G Temperature and steam flow regulator
H Foldable handle button
I Water tank

INSTRUCTIONS FOR USE

Before use:

Remove the appliance’s protective film.
Make sure that all products’ packaging has been removed.
Ensure the voltage selector is set to the correct setting for the supply mains where the appliance is to be used.
To eliminate the smell given off by the appliance when used for the first time, it is recommended to have it on at full power for 2 hours in a well-ventilated room.

Voltage selector:

The appliance has a voltage selector control, situate the selector according to the type of voltage available in the mains where the appliance is to be connected. (Fig.2).

Filling with water:

It is essential to have filled the water tank to be able to work with steam.
Open filling opening lid.
Fill the water tank taking care to observe the MAX level (Fig.1).
Close water inlet lid.

Use:

Extend the supply cord completely before plugging it in.
Connect the appliance to the mains.
Turn the temperature and steam flow regulator to the desired temperature position.
The pilot light (D) comes on.
Do not use temperatures higher than those indicated on the garments to be treated.
1. Temperature for synthetic fibres (Polyester, Nylon…).
2. Temperature for silk and wool.
3. Temperature for cotton/linen. (Minimum temperature for steam ironing)
If garment has various kinds of fibres, select the temperature for the fibre that requires the lowest temperature. (For example, select the temperature for polyester for an article made out of 60% polyester and 40% cotton).
Wait until the pilot light (D) has gone out which will indicate that the appliance has reached an adequate temperature.
During the appliance’s use the pilot light will come on and off automatically, indicating the heating elements are working, and therefore maintaining the desired temperature.

Dry ironing:

The appliance has a steam switch (F) that permits dry ironing (without steam) when placed in the off position. Steam Ironing:
To avoid leakage of water, wait until the iron has reached temperature before moving the steam switch (F) to the on position.
It is possible to iron with steam whenever the water tank is filled with the steam switch (F) is in the steam position and the adequate temperature is selected. Steam blast:
This function proportions extra steam for eliminating wrinkles.
Press the steam stroke button (A). Wait a few seconds until vapour penetrates the fibres of the garment before pushing the button again. For optimum steam quality, do not apply more than three successive blasts.
The steam stroke button has to be pressed repeatedly to release the first shot.

Once you have finished using the appliance:

Select the minimum position (MIN) using the temperature and steam flow regulator.
Unplug the appliance from the mains.
Remove the water from the inside of the appliance.
Allow it to cool
Clean the appliance.

Practical recommendations:

Classify the garments into groups by ironing temperature. The appliance heats up more quickly than it cools down, therefore, to avoid accidents, minimise energy consumption and optimise time, it is advisable to start off ironing items that require lower temperatures and progress to those that need higher temperatures.
Pure wool fabrics (100%) can be ironed with the iron set to steam. Select a high steam temperature and place a cotton cloth between the iron’s metal surface and the garment.

CLEANING

Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
Never immerse the appliance in water or any other liquid or place it under running water.

How to deal with lime scale incrustations:

For the appliance to work correctly it should be kept free of limescale or magnesium incrustations caused by the use of hard water.
To prevent this issue it is advisable to use distilled water or water with low lime or magnesium mineralization
However, if it is not possible to use the kind of water recommended above, you should periodically remove the limescale from the appliance:
Every 6 weeks if the water is “very hard”.
Every 12 weeks if the water is “hard”.
To do so, we recommend the use of the specific product for this kind of appliance, which can be found in specialised shops and authorised technical services.
Homemade solutions are not recommended in the dealing of this appliance, such as the use of vinegar.

ANOMALIES AND REPAIR

Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not attempt to disassemble or repair the appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your country:

Ecology and recyclability of the product

The materials of which the packaging of this appliance consists are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be considered harmful to the environment.

This symbol means that in case you wish to dispose of the product once its working life has ended, take it to an authorised waste agent for the selective collection of Waste from Electric and Electronic Equipment (WEEE).
This appliance complies with Directive 2014/35/EU on Low Voltage, Directive 2014/30/EU on Electromagnetic Compatibility, Directive 2011/65/EU on the restrictions of the use of certain hazardous substances in electrical and electronic equipment and Directive 2009/125/EC on the ecodesign requirements for energy-related products.

WARRANTY AND TECHNICAL ASSISTANCE

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.
You can find the closest one by accessing the following web link: http://www.2helpu.com/.
You can also request related information, by contacting us (see the last page of the manual).
You can download this instruction manual and its updates at http://www.2helpu.com/.

Black & Decker® and BLACK+DECKER™ and the Black & Decker® and BLACK+DECKER™ logos are registered trademarks of The Black & Decker® Corporation and are used under licence. All rights reserved. Imported and Distributed by ENGINEERING AND TECHNOLOGY FOR LIFE, S.L. Avda. Barcelona s/n Oliana, 25790, Spain

www.blackanddecker.eu

United Kingdom & Republic Of Ireland
Black & Decker
Slough, Berkshire SL1 3YD
210 Bath Road “
www.blackanddecker.co.uk
emeaservice@sbdinc.com
Tel. 01753 511234

Romania
Stanley Black&Decker Polska Bucharest Branch
Phoenicia Business Center
Turturelelor Street, No 11A, 6th Floor,Module 15, 3rd District. Bucharest (Romania)
office.bucharest@sbdinc.com
Tel. +4021.320.61.04.

Nederland
Stanley Black & Decker Netherlands BV
Holtum Noordweg 35
6121 RE BORN
Postbus 83. 6120 AB BORN
www.blackanddecker.nl
enduser.NL@SBDinc.com
Tel. +31 164 283 065
Fax +31 164 283 200

Italia
Stanley Black & Decker Italia
Via Energypark 6 c/o Energypark Building 3 sud
20871 Vimercate (MB)
www.blackanddecker.it
service.italia@blackdecker.com
Tel. 800-213935
Fax 039-9590313

Danmark
Stanley Black & Decker Denmark
Roskildevej 22
2620 Albertslund
www.blackanddecker.dk
kundeservice.dk@sbdinc.com
Tel. 70 20 15 10
Fax. 70 22 49 10

ENGINEERING AND TECHNOLOGY FOR LIFE, S.L.
Avda. Barcelona s/n
Oliana, 25790, Spain