FRIEDMAN Phil X Signature 100-Watt 1-Channel Tube Head with Boost Instruction Manual
- June 9, 2024
- FRIEDMAN
Table of Contents
Phil X Signature 100-Watt 1-Channel Tube Head with Boost
Instruction Manual
Phil X Signature head
INSTRUCTION MANUAL
Phil X Signature 100-Watt 1-Channel Tube Head with Boost
Congratulations on purchasing this incredible new guitar amplifier designed by
one of the most well known amp modders and designers in the LA Music scene for
the past 20 years, Dave Friedman.
Dave Friedman has been designing and building guitar rigs for the stars since
the early nineties. After many years of modding amplifiers and consulting for
other wellknown amplifier companies, Dave has finally brought his talent to a
new line of production amps under his name, Friedman Amplification.
Dave’s collaboration with Phil X has lead to the making of a simple yet
versatile Rock n’ Roll Machine.
The X is a 100-watt EL34 powered fire breather that is also capable of
producing many styles of music from blues to classic rock and heavy rock to
metal by just adjusting the gain and master controls. Switching the Cut or
voltage switch gives you even more sounds on hand. And don’t forget 2nd master
volume for your volume boosting needs.
A lot of people don’t believe an EL-34 100watt amp can sound great even at
bedroom volume levels. We beg to differ! Dave completely designed the Master
volume to sound fantastic at any level.
You will notice instantly, the tight bottom end and rich harmonically detailed
chords and single notes. This amp cleans up remarkably well with the guitar’s
volume control, even with the amp on higher gain settings.
The X takes pedals very well and loves boosts, OD’s, phasers, flangers,
tremolos, wahs, etc. The X also has an ultra transparent Series FX loop that
takes time based FX pedals and rack units equally well.
- Incredibly versatile single-channel amp.
- 100-Watt EL34 Power Tubes.
- 3 12AX7 Preamp Tubes
- Dirty Channel has Vol, Gain, Treble, Middle, Bass.
- Global Presence Control
- Series Effects Loop
- Custom Transformers
- Line Out with Level Control on rear panel.
PLUGGING IN
We recommend starting the amp up with the Bass on 10, the Mids at around 6 ,
the Treble at 5 and the Presence at 5. Set the Gain around 8 and then bring
the master up to taste. After plugging in, you will notice instantly, the
tight bottom end and rich harmonically detailed chords and single notes,
that’s the Friedman sound. This amp cleans up remarkably well with the
guitar’s volume control even with the amp on higher gain settings.
We know you will love your new PHIL X amp. If you have any questions or help
don’t hesitate to email us at
Friedmanamps@gmail.com
INSTRUCTIONS
Please keep this instruction manual for future reference and for the duration
of owning this Friedman Amplifier. Please carefully read and understand the
instructions inside this user’s manual before attempting to operate your new
amp. This instruction manual includes essential safety information regarding
the use and maintenance of the amplifier. Take special care to heed all
warning symbols and signs inside this manual and those printed on the
amplifier itself.
WARNING! TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE AMPLIFIER TO
WATER OR MOISTURE. DO NOT OPERATE NEAR ANY WATER SOURCE
WHAT’S THE MEANING OF THIS? The lightning flash with an arrow triangular
symbol is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the products enclosure, and may be of sufficient
magnitude to constitute a risk of electric shock
WHAT’S THE MEANING OF THIS? The exclamation point triangular symbol is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the user manual accompanying this
amplifier!
-
Read Instructions
All the safety and operating instructions should be read before this product is operated. -
Retain Instructions
The safety and operating instructions should be retained for future reference. -
Heed Warnings
All warnings on the amplifier and in the operating instructions should be adhered to. -
Follow Instructions
All operating and use instructions should be followed. -
Water and Moisture
The amplifier should not be used near water for example, a bathtub, washbowl, kitchen sink, laundry tub, wet basement, or near a swimming pool, and the like. -
Heat
Amplifier should be situated away from heat sources such as radiators, heat registers, stoves, or other amplifier (including amplifiers) that produce heat. -
Power Sources
This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. -
Grounding or Polarization
This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. -
Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the cord in correspondence of plugs, convenience receptacles, and the point where they exit from the amplifier. -
Cleaning
The amplifier should be cleaned only as recommended by the manufacturer. Clean by wiping with a cloth slightly damp with water. Avoid getting water inside the amplifier. -
Non-use Periods
The power cord of the amplifier should be unplugged from the outlet when left unused for a long period of time. -
Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. -
Damage Requiring Service
The amplifier should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the amplifier; or
C. The amplifier has been exposed to rain; or
D. The amplifier does not appear to operate normally or exhibits a marked change in performance; or
E. The amplifier has been dropped, or the enclosure damaged.
F. The amplifier needs tube replacement or biasing -
Servicing
The user should not attempt any service to the amplifier beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. -
Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. -
Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards. -
Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. -
Lightning
For added protection for this product before a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power line surges. -
Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. -
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. -
FUSES
Always use the correct rating and type of fuse as indicated on the rear panel. Note the proper rating fuse is determined by the AC line voltage in the country this unit is being operated.
P (Power Switch): Turn this ON for about one minute before taking the amp
out of Standby for maximum tube life. ALWAYS MAKE SURE THERE IS A SPEAKER LOAD
CONNECTED TO YOUR AMP BEFORE TURNING ON.
S (Standby Switch): Wait about a minute before placing this switch in the
ON position. This will put your amp into PLAY mode.
POWER INDICATOR LAMP: This is a gentle reminder that your amp is powered
up.
P (Presence Control): Adjusts the upper mids and highs in the power amp
section. Start at about 4-5 and adjust to taste.
Note: This pot will sound scratchy when adjusted this is normal.
V-/V+ (Voltage Switch): This is a hi/low voltage switch. V + is for
higher voltage, this is a bigger and bolder sound. V- is a lower voltage, this
is for a slightly softer and spongier sound.
B (Bass Control): This adds or takes away bass or bottom end. As the amp
gets louder you may want to back this off a bit. Start at 7-10 for bedroom
volumes.
M (Middle Control): Adds or takes away midrange. Start at 5 or 6, lower
settings will scoop the mids, higher levels will allow your audience to
actually hear the guitar in the mix.
T (Treble Control): This adds or takes away treble. Start at 5 and adjust
to taste.
V-1 (Volume 1 Control): This is the Phil X Signature Head’s VOLUME. The
more you turn it up the louder it gets.
V-11 (Volume 2 Control): Second master volume for a lead volume boost.
This is foot switchable.
G (Gain Control): This adds gain/distortion. Adjust to taste. Don’t be
afraid.
C (Cut Switch): This is a three-way switch for cutting gain. With the
switch in the middle you will have the highest gain. With the switch in the
right position you will have less gain. With the switch in the left position
you will have the least amount of gain.
I (Input Jack): Just like it says. This is the Phil X Signature Head’s
Guitar Input Jack.
FOOTSWITCH JACK : This is where you plug in the footswitch.
SEND JACK: This is where you plug the INPUT of your Effect(s). Use a high
quality shielded guitar cable.
RETURN JACK: This is where you plug the OUT of your Effect(s). Use a high
quality shielded guitar cable.
SPEAKER OUT JACKS (2): Plug speaker cabinets here. Set Impedance selector
to appropriate position.
LINE OUT LEVEL CONTROL: This controls the overall level of the line out.
LINE OUT JACK: Connect a high quality ¼” guitar cable to send signal to
external devices such as additional power amps, FX, etc. This is not speaker
emulated.
MAINS INPUT: Plug the supplied IEC power cord here and into a 115v wall
outlet to power the beast.
MAIN FUSE : This fuse is in the compartment found below the AC
receptacle. Replace only with type indicated on rear panel. This is also most
likely the result of a bad tube. Constant blowing of this fuse (even when
using new tubes) is an indication that something could be seriously wrong with
your amp. STOP and call us so we may help you diagnose.
HT FUSE: Only replace with Type indicated on rear panel. If this blows,
don’t freak out too much. It’s most likely a bad power tube. We recommend you
carry a few spare fuses and a spare set of tubes when gigging.
FRIEDMAN LIMITED LIFETIME WARRANTY
Thank you for choosing Friedman. Friedman manufactures some of the world’s
most reliable hand-wired, all-tube amplifiers and speaker cabinets. Friedman
takes great pride in an extremely thorough testing procedure, which is
implemented on each product prior to shipment. In the unlikely event that you
have a problem with your amplifier, please refer to warranty below. Friedman
stands behind our products like no other and we’re here to help you!
AMPLIFIERS: Friedman offers a limited lifetime warranty to the original
purchaser that a Friedman amplifier will be free from defects in material and
workmanship. A dated sales receipt will establish coverage under this
warranty, PLEASE KEEP YOUR PROOF OF PURCHASE TO USE YOUR WARRANTY. This
warranty does not cover service or parts to repair damage caused by accident,
neglect, abuse, normal wear, disaster, misuse, abuse, overpowering,
negligence, inadequate packing or shipping procedures and service, repair or
any modifications to the product which have not been authorized or approved by
Friedman in writing. ANY MODIFICATION TO THE AMPLIFIER WILL VOID YOUR
WARRANTY. If this product is defective in materials or workmanship as
warranted above, your sole remedy shall be repair or replacement by Friedman
as provided below.
CAUTION: Do NOT attempt to repair, modify or service your amplifier by
yourself!!! Please read the instruction manual for all safety notifications,
warnings and instructions. Friedman, like all tube amplifiers, has extremely
high voltages that can cause serious injury or death. Do not remove the
chassis from the amplifier. All repair and service work must be performed by
Friedman or an authorized service center of Friedman. ANY UNAUTHORIZED REPAIRS
WILL VOID YOUR WARRANTY.
TUBES: Friedman warrants the original purchaser that the specific tubes
used in Friedman will be free from defects in material and workmanship for a
period of 90 days from the original date of purchase. A dated sales receipt
will establish coverage under this warranty. This tube warranty will
automatically terminate 90 days after the original retail sales date. This
tube warranty is in lieu of all other expressed warranties. If tubes fail
within the 90 day warranty period your sole remedy shall be replacement of
tubes as provided below.
RETURN PROCEDURES : In the unlikely event that a defect occurs please
email us at FriedmanAmps@Gmail.com. In most
cases we can help you diagnose the problem over the phone. If a product must
be sent to us, please follow the procedure outlined below.
- Defective products must be shipped, together with proof of purchase, freight pre-paid and insured to the Authorized Friedman Service Center or directly to Friedman.
- If a product must be returned to Friedman for warranty replacement/repair, a Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product.
- Please contact Friedman Customer Service Department for the Authorized Friedman Service Center nearest you.
- Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser.
- The Return Authorization Number must appear in large print directly below the shipping address.
- Always include a brief description of the defect, along with your correct return address and telephone number.
- When calling to inquire about a returned product, always refer to the Return
Authorization Number. If Friedman determines that the unit was defective in materials or workmanship at any time during the warranty period, Friedman has the option of repairing or replacing the product at no additional charge, except as set forth below.
- All replaced parts become a property of Friedman. Products replaced or repaired under this warranty will be returned via ground shipping within the United States or Canada – freight prepaid.
- Friedman is not responsible for costs associated with expedited shipping, either to Friedman or the return of the product to the customer.
All warranty repairs outside the United States and Canada must be directed to the dealer or distributor from which you purchased the product.
FOR YOUR PROTECTION : Please complete and send in the completed warranty
registration card to: Friedman Amplification, care of Boutique Amps
Distribution, 5300 Harbor Street, Commerce, CA 90040. Please send within (10)
ten days of the date of purchase so that we may contact you directly in the
event a safety notification issued in accordance with the 1972 Consumer
Product Safety Act.
CUSTOMER SUPPORT: Our dedicated and friendly staff is ready to help you
with any warranty or product questions you may have. Email us at
Friedmanamps@gmail.com
Thank you again for choosing Friedman and we look forward to a long
relationship!
INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event will Friedman be liable for any incidental or consequential damages arising out of the use or inability to use of any Friedman product, even if a Friedman dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>