SONY VPLL-Z4111 Projection Lens User Manual

: June 9, 2024
: Sony

Table of Contents

SONY VPLL-Z4111 Projection Lens
CUSTOMER SERVICES
Overview
About lens attachment
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONY VPLL-Z4111 Projection Lens

Before operating the unit, please read this manual thoroughly and retain it for future reference.

Caution

Refer to the manual of the projector with which the lens is used for throw ratio and hazard distance.
If the projector becomes RG3 (Risk Group 3 as per IEC 62471-5) by the combination, the following warnings apply.
- No direct exposure to the beam shall be permitted.
- Operators shall control access to the beam within the hazard distance or install the product at a height that will prevent eye exposure within the hazard distance.
For the customers in Europe, Australia and New Zealand

WARNING
Operation of this equipment in a residential environment could cause radio interference.

For the customers in Europe
This apparatus shall not be used in the residential area

CUSTOMER SERVICES

For the customers in the U.S.A.
SONY LIMITED WARRANTY – Please visit http://www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY – Please visit http://www.sonybiz.ca/pro/lang/en/ca/article/resources-warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
For the customers in Europe
Sony Professional Solutions Europe – Standard Warranty and Exceptions on Standard Warranty. Please visit https://pro.sony/support- services/primesupport/support-professional-solutions-europe-standard- productwarranty for important information and complete terms and conditions.
For the customers in Korea
SONY LIMITED WARRANTY – Please visit http://bpeng.sony.co.kr/handler/BPAS- Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

Overview

This lens is designed for use with the Sony Projector.
Make sure to confirm that this lens is usable with your projector before using it by reading the Operating Instructions and Installation Manual for Dealers supplied with your projector.
Read the Operating Instructions and Installation Manual for Dealers supplied with your projector for changing the lens.

On condensation
If the room temperature where the projector is installed changes rapidly, or if the projector is moved suddenly from a cold to a warm place, condensation in the projector may occur. As the condensation may cause malfunction, be careful in adjusting temperature settings of the air conditioner. If condensation occurs, leave the projector turned on for about two hours before use.

Do not place this product close to medical devices
This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

Notes

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

About lens attachment

Attaching the lens may cause fire or injury to the person.
Users should request qualified Sony representative to attach the lens.

Notes

Lenses can be scratched easily. When handling lenses, always place them gently on a stable, level surface in a horizontal position.
Avoid touching the lens surface.
Do not place any object just in front of the lens that may block the light during projection.
If light is blocked, heat may damage the object or the lens of the unit (resulting in deformation, etc.). Use the picture muting function to suspend projection for a short while.