LOFTILLA B0BNB1XSJ2 Body Composition Scale User Guide
- June 9, 2024
- LOFTILLA
Table of Contents
B0BNB1XSJ2 Body Composition Scale
User Guide
B0BNB1XSJ2 Body Composition Scale
www.loftilla.com
Body Composition Scale User Guide
Body composition scale measures weight, body fat percentage, BMI and other
body composition data using bioelectrical impedance analysis (BIA) technology.
This body composition scale is intended for home use only.
Initial Setup
Step 1: Download “Loftilla Plus” app and create an account
From Apple App Store (ios) or Google Play (Android), search for “Loftilla
Plus” and download it to your smart phone. You can also scan the QR code to
download.
https://loftilla.com/loftilla-plus/
Step 2: Pair scale with smartphone.
Make sure Bluetooth is enabled on your phone. For Android 6.0 and above,
Location also needs to be enabled.
Pairing is done automatically.
Bluetooth icon is displayed on the scale.
Take Measurements
Apply pressure to turn on scale, wait for “CAL” back to “0.0” Step on the
scale barefoot until numbers are stable
Check measurements
When the display number flashes twice, it indicates that the weight
measurement has finished. When the number 0 stops moving back and forth, the
body fat and other body composition measurements have completed.
Measurement Tips (Continue)
Scale Display
Trouble Shooting
No wireless connection between your scale and the app
- Reinstall “Loftilla Plus” app. Exit from the app , and then delete it. Go to Apple App Store or Google Play to install “Loftilla Plus” app again.
- Turn off Bluetooth and then turn it on again.
- Power on the scale to reset it. Remove the batteries and put it back in to wake the scale.
- For Android 6.0 and above, “Location” needs to be enabled.
- If you fail to set up Bluetooth, please delete the previous scale ID in the app and then click “Add device” to “Select device type”, and choose “Smart Body Fat Scale” to pair it with your phone. After completing the pairing process, Bluetooth connection between the scale and your phone is done.
Measurement Tips
To have accurate, consistent and comparable measurement results, there are
some DOs and DON’Ts.
A non-zero number on scale
- Place the scale on a flat hard surface.
- Stand straight on the scale with barefoot, no socks or shoes.
- Both feet uniformly touch the four metal electrodes.
- Do calibration each time. Wait for “CAL” back to “0.0” then step on the scale for measurements.
- Use the scale under the same condition.
DON’Ts
- Do not measure with socks or shoes on.
- Do not measure during or immediately after tenuous exercise.
- Do not measure immediately after shower, bath or sauna.
- Do not measure after heavy alcohol consumption.
- Do not measure when you have a fever.
WARNING
Please read carefully before use
- Do not use it if you have a pacemaker, or any other internal medical devices in your body.
- Do not use it if you are pregnant.
- Do not use it on slippery floors.
- Do not use it when your body is wet.
CAUTION
- Your body compositions may not be accurate after a shower or heavy physical activities.
- Except weight, other body composition measurements are not suitable for whom is under 18.
- LOFTILLA body composition scale should not be used for treating or diagnosing any medical conditions. Always consult your physician or health professional for best treatments.
Specifications
- Model: CS20B
- Product Size: 10.6 x 10.6 x 1.1 inch
- Product Weight: 2.6 lb
- Battery: 2 x 1.5V AAA (Included)
- Weight Range: 0.4 – 396 lb
Package Contents
- Body Composition Scale
- 2 AAA Batteries
- User Guide
Manufactured by Shenzhen Yolanda Technology Co., Ltd.
Room 201, Jinfulai Building, No.49-1, Dabao Road, Dalang Area, Xinan Street,
Baoan, Shenzhen, China
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2ANDX-CS20X1
Arboleaf Corporation
5465 Legacy Drive, Suite 650 Plano, TX 75024
support@loftilla.com (US)
1-800-658-1148
www.loftilla.com
Made in China
FCC ID: 2ANDX-CS20X1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>