MAXIM LIGHTING 10096WWDTN Scout 1-Light Swing Arm Sconce User Manual
- June 9, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 10096WWDTN Scout 1-Light Swing Arm Sconce
PRODUCT NAME: Scout 1-Light Swing Arm Sconce
ITEM NUMBER: 10096WWDTN
Please consult a qualified electrician for hanging fixture and wiring
Light Source: 1xE26 Medium Base 9W LED (Included)
Made in China/Hecho én China/Fabruque en China
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the Components inside. Carefully emove all packaging materials
and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock.
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is tom or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner. Periodically (every 90 days) make sure that the
screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
Contents
Before getting, started, ensure the package contains the following
components:
- Don’t connect wire in back plate, use the plug to plug into a power outlet .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>