careium 9350 Voice Alarm User Manual
- June 4, 2024
- careium
Table of Contents
Careium 9350 Voice Alarm
Connect this device to the radio transceiver to communicate wirelessly between device and care phone. In order for the device to send alarms through the care phone, you need to pair them.
How to pair the radio transceiver with the care phone
- Connect the 9350 to the voice alarm.
- Activate the radio learning mode in the Carphone / System
- On the voice alarm; press the red button (Knop logo) to initiate pairing. A confirmation beep is heard on the care phone.
- On the care phone; press the alarm button to assign the new device. A new confirmation beep is heard.
For more information on pairing the care phone with the radio transceiver, see the manual of the care phone.
How to test the alarm after pairing
On the voice alarm; press the red button (Knop logo) to generate an alarm.
Check that the alarm is received at the Alarm Receiving Center.
This is how it works
- When an alarm is triggered on the device, the radio transceiver sends the alarm to the care phone.
- The care phone passes the alarm to the alarm receiving centre or another receiver.
Battery warning
The device automatically alarms at low battery. Replace the battery as soon as
possible after low battery level has been indicated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>