BARSKA BC423 Ball Joint Tripod Head Instruction Manual
- June 14, 2024
- BARSKA
Table of Contents
BARSKA BC423 Ball Joint Tripod Head
Ball Joint Tripod Head
The Ball Joint Tripod Head is a versatile accessory that allows for smooth
and precise movements of your camera or device. It is designed to be mounted
onto an adaptable pod or tripod, providing stability and flexibility for
capturing images or videos.
Parts of the Ball Joint Head System
- A. Mounting Plate Screw
- B. Mounting Plate
- C. Mounting Plate Lock
- D. Ball Joint Head Lock
- E. Pan Lock
- F. Base
Mounting the Head
The ball joint head system is mounted under the base. Follow these steps to
mount the head:
- Unscrew the mounting plate lock until the mounting plate can be easily slid out of place.
- Position the mounting plate so that the mounting plate screw aligns with the platform of the adaptable item. Underneath the mounting plate, there is a screw. Screw the mounting plate to the adaptable item.
- Slide the mounting plate back into position. Secure the mounting plate in place by screwing the mounting plate lock.
Horizontal Movements
To make horizontal movements with the ball joint head, follow these
instructions:
- Loosen the pan lock to allow for horizontal movement of the ball joint.
- Adjust the position of the ball joint head to your desired angle.
- Tighten the pan lock to secure the ball joint head in place.
Ball Joint Head System
The ball joint head system allows for movement in any direction.
Follow these steps to use it:
- Loosen the ball joint head lock to enable movement.
- Adjust the ball joint head to your desired position.
- Tighten the ball joint head lock to secure your view in place.
- To view images straight down, loosen the ball joint head lock and rotate the ball joint head system until the column between the ball and mounting area slides into the vertical cut-out.
For further assistance or troubleshooting, please refer to the complete user manual or contact our customer support.
Ball Joint Tripod Head
Parts of the Ball Joint Head System
- A. Mounting Plate Screw
- B. Mounting Plate
- C. Mounting Plate Lock
- D. Ball Joint Head Lock
- E. Pan Lock
- F. Base
Mounting the Head
Located under the base of the ball joint head system is the mounting socket where it can be screwed on to the platform of an adaptable pod.
Mounting Plate
- Unscrew the mounting plate lock until the mounting plate can be easily slid out of place.
- Position the mounting plate so that the mounting plate screw aligns with the platform of the adaptable item. Located under the mounting plate is a screw, screw the mounting plate to the adaptable item.
- Slide the mounting plate back into position. Secure the mounting plate in place by screwing the mounting plate lock.
Horizontal Movements
Loosen pan lock to move ball joint horizontally.
Ball Joint Head System
For movement in any direction, simply loosen the ball joint head lock. When
you have reached your desired position, tighten the ball joint head lock to
secure your view in place. The ball joint head features a vertical cut-out for
viewing images straight down. To use this feature, simply loosen ball joint
head lock and rotate the ball joint head system until the column between the
ball and mounting area slides into the vertical cut-out.
©2015 BARSKA® Pomona, CA 91767, USA | www.barska.com