Heritage Audio FRAME 8 8-Channel Neve Frame User Manual
- June 9, 2024
- Heritage Audio
Table of Contents
Heritage Audio FRAME 8 8-Channel Neve Frame
INTRODUCTION
Thank you for choosing the FRAME 8. Heritage Audio is dedicated to bringing you ´the sound of yesterday for tomorrow´. We specialize in capturing that unique, enticing sound that everybody has fallen in love with. For years engineers, producers and musicians have been yearning for that classic vibe. Usually the only option is to search for old, used original equipment that is almost always in a questionable state of operation. This brings with it a whole lot of other issues, making the experience less than desirable. Not to mention the very high prices asked for this equipment, which makes them virtually unobtainable for the great majority. Now it´s possible to obtain that same sound with a brand new piece that will give you all the problem- free, heavy-duty use you´ll need for years of music making history.
© 2022 Heritage Audio S.L. is the sole owner of the copyright of all
information and drawings contained in this manual which are not to be copied
or reproduced by any means or disclosed in part or whole to any third party
without written permission.
Heritage Audio reserves the right to alter specifications without notice. The
information in this manual has been carefully checked and is believed to be
accurate at the time of publication. However, no responsibility is taken by us
for inaccuracies, errors or omissions nor any liability assumed for any loss
or damage resulting either directly or indirectly from use of the information
contained within it.
DESCRIPTION
Our FRAME 8 is handmade in the EU employing the same exact ISEP mechanical
components used in the Series 80 consoles with aluminium rails, guides, etc.
This will ensure your original vintage modules, as well as any of the
currently made modules, will fit like a glove.
Every channel has its own output control to attenuate the signal before the
output transformer as well as an illuminated phantom switch to provide 48 V.
The FRAME 8 is also ready for linking up to eight 2264E (Legacy Product)
compressors.
The back panel features Neutrik gold plated XLR connectors for MIC and LINE
inputs, as well as LINE outputs for connecting equipment.
External Power Supply Unit is connected by a Neutrik gold plated 4-pin XLR. It
is configurable for 220-240 V or 110 V. The power supply is included
.
GETTING STARTED
FRONT
1 | 2 | 3 | 4 | 5 |
---|
PHANTOM POWER SWITCH
Activates the 48 V power for Condenser MICs.
| OUTPUT ATTENUATOR
Attenuates from 0 to infinity
| 8 x EDGE CONNECTOR
To connect and power the 80 Series Modules.
| Impedance Switch Space Opening to allow the Impedance Switch through.| RAIL
To fasten and secure the 80 Series Modules in place.
REAR
1 | 2 | 3 | 4 |
---|
MIC INPUT
8 x Female XLR, Gold Plated.
| LINE INPUT
8 x Female XLR, Gold Plated.
| LINE OUTPUT
8 x Male XLR, Gold Plated.
| POWER CONNECTOR
Neutrik gold plated 4-pin XLR.
APPLICATIONS
DRUM RECORDING
LINE
AUDIO PROCESSING
SPECIFICATIONS
- Handcrafted in the EU employing the same mechanical components used in vintage Series 80 consoles.
- Neutrik gold-plated XLRs for Mic and Line inputs.
- Neutrik gold plated XLRs outputs.
- Illuminated red pushbuttons for +48 V phantom power (Less than 260 mA @ 48 V DC).
- Prepared for Compression Linking of buses A and B.
- Separate output controls per slot.
- Dimensions (W x H x L): 315 mm x 230 mm (6U) x 482 mm.
TROUBLE SHOOTING
PROBLEMS | SOLUTIONS |
---|
There doesn´t seem to be any power feeding the
FRAME 8.
| Make sure it has been connected to its power supply. It is configurable for
220-240 V or 110 V
I´m trying to use a condenser microphone but it doesn´t seem to recognise it.|
Make sure you have activated the 48 V button for the corresponding channel.
I´m getting too much signal at my DAW.| Try reducing the OUTPUT with the red
knob on the right.
I´d like to change the Impedance from 1200 to 300 Ω but don´t know how.| There
is a switch on the back of the modules that will allow this. You will have to
remove the module first to access it.
- For any further doubts or questions please get in contact with us at: support@heritageaudio.com
WARRANTY STATEMENT
LIMITED 2 YEAR WARRANTY
Heritage Audio FRAME 8 is warranted by Heritage Audio SL to be free from
defects in materials and workmanship for the period of 2 years to the original
purchaser. In the event of such defects, the product will be repaired without
charge or, at our option, replaced with a new one if delivered to Heritage
Audio prepaid, together with a copy of the sales slip or other proof of
purchase date. The warranty excludes problems due to normal wear, abuse,
shipping damage or failure to use the product in accordance with the
specifications.
Heritage Audio shall not be liable for damages based upon inconvenience, loss
of use of the product, loss of time, interrupted operation or commercial loss
or any other damages, whether incidental, consequential or otherwise.
This warranty is not transferable.
REGISTRATION
Please visit our website: https://heritageaudio.com/registration/
RECALL SHEETS
Session / Title: ………………..Track: ………………….Connected Equipment: …………………
Date: …………………. Instrument: ………………… Notes: …………………
Session / Title: ………………..Track: ………………….Connected Equipment: …………………
Date: …………………. Instrument: ………………… Notes: …………………
www.heritageaudio.com
HERITAGE AUDIO. C/ Alfonso Gómez, 38, 3C. 28037 Madrid – Spain.
Tel: +34 917 266 189
info@heritageaudio.com