ASUS Q20919 P306 Tuf Gaming M4 Wireless Optical Gaming Mouse User Guide

: June 9, 2024
: Asus

Table of Contents

Package Contents
Specifications*
Mouse features
Installing the battery
Removing the USB Dongle
Connecting your gaming mouse
Replacing the USB Dongle
Notices
Proper disposal
Radio Frequency (RF) Exposure Information
Service and Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS Q20919 P306 Tuf Gaming M4 Wireless Optical Gaming Mouse User Guide

Package Contents

Specifications*

Resolution	DPI 1	DPI 2	DPI 3 (Default)	DPI 4
Red	Purple	Blue	Green
100 DPI to 12000 DP	400 DPI	800 DPI	1600 DPI	3200 DPI

You may customize the DPI settings for DPI 1-4 through Armoury Crate.

Mouse features

Left-click button
Scroll wheel
Right-click button
DPI Indicator
DPI button
Forward button
Backward button
Mouse feet
Optical sensor
Connection mode switch

Installing the battery

Removing the battery

Removing the USB Dongle

USB Dongle

Connecting your gaming mouse

Setting up your gaming mouse as a Bluetooth wireless mouse

Set the connection switch to the Bluetooth mode.

NOTE: Only follow step 2 when pairing your gaming mouse to a different device.

Press and hold the Left-click button, Right-click button and DPI button for 3 seconds until the DPI indicator LED blinks blue.
The DPI indicator LED will light up blue for 5 seconds then switch back to the original lighting effect after successfully pairing.

NOTE: If you are pairing Bluetooth for the first time and fails after 1 minute, the DPI indicator LED lights up red for 5 seconds then reverts back to the original lighting effect.

Replacing the USB Dongle

Setting up your gaming mouse as a RF wireless mouse

Connect the USB dongle to a USB port on your computer.
Set the connection switch to the RF 2.4G Wireless mode.

Updating the firmware and customization

Connect the USB dongle to a USB port, and set your gaming mouse to the RF 2.4G Wireless mode.
Download and install the Armoury Crate from https://www.asus.com/supportonly/Armoury%20Crate/HelpDesk_Download/
Follow the software instructions to update your gaming mouse and dongle’s firmware.
Customize your gaming mouse using Armoury Crate.

Battery Status

The DPI indicator LED will blink red when the battery power is below 20%, and continue until the battery power is depleted.

Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down

Notices

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF Exposure Warning
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Proper disposal

DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits.
The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF Exposure limits under portable exposure conditions. (antennas are less than 20 cm of a person’s body).

Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

CE RED RF Output table (Directive 2014/53/EU)

Function	Frequency	Maximum Output Power (EIRP)
2.4GHz wireless	(2403 – 2480MHz) – Mouse	7 dBm
(2403 – 2480 MHz) – Dongle	0 dBm
Bluetooth	(2402 – 2480 MHz) – Mouse	7 dBm

Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment
Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

CE Mark Warning

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Service and Support

Visit our multi-language website at https://www.asus.com/support/.

Manufacturer: ASUSTek COMPUTER INC.
Address, City: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
Authorized Representative in Europe: ASUS COMPUTER GmbH
Address: Harkortstrasse 21-23, 40880 Ratingen
Country: Germany
Authorized Representative in United Kingdom: ASUSTEK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England
Country: United Kingdom