LG 24GN65R UltraGear LED Monitor Owner’s Manual
- June 9, 2024
- LG
Table of Contents
**LED
Monitor*
24GN65R, 27GN65R, 32GN55R
Owner’s Manual**
24GN65R UltraGear LED Monitor
- LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LICENSE
Each model has different licenses. Visit www.lg.com for more information on
the license.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
ASSEMBLING AND PREPARING
CAUTION
- Always use genuine LG components to ensure safety and product performance.
- The product warranty will not cover damage or injury caused by the use of unauthorized components.
- It is recommended that use the supplied components.
- If you use generic cables not certified by LG, the screen may not display or there may be image noises.
- Illustrations in this document represent typical procedures, so they may look different from the actual product.
- Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
- Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
- Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
- When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
- For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there is no problem in using the product at all.
NOTE
- The components may look different from those illustrated here.
- Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
- To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
- The power cord provided may differ depending upon the region.
Supported Drivers and Software
You can download and install the latest version from the LGE website
(www.lg.com).
Drivers and Software | Installation Priority |
---|---|
Monitor Driver | Recommended |
OnScreen Control | Recommended |
Product and Button Description
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick
button or moving it left/right with your finger.
Basic Functions
| **| Power on| Press the joystick button once with your finger to turn on
the monitor.
---|---|---|---
| Power off| Press and hold the joystick button once with your finger to turn
off the monitor.
| /**| Volume control| You can control the volume by moving the joystick
button left/right.
NOTE
- The joystick button is located at the bottom of the monitor.
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the
monitor from being scratched or damaged and to ensure safe transportation,
regardless of its shape or size.
- Place the monitor in the original box or packing material before attempting to move it.
- Before moving or lifting the monitor, disconnect the power cord and all other cables.
- Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
- When holding the monitor, the screen should face away from you to prevent it from being scratched.
- When transporting the monitor, do not expose the monitor to shock or excessive vibration.
- When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
-
Avoid touching the monitor screen as much as possible.
– This may result in damage to the screen or some of the pixels used to create images. -
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
Installing on a Table
- Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation.
CAUTION
- Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
- Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
- If you need another power cord, please contact your local dealer or the nearest retail store.
Adjusting the Stand Height
- Place the monitor mounted on the stand base in an upright position.
- Handle the monitor with both hands for safety.
WARNING
- When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle
- Place the monitor mounted on the stand base in an upright position.
- Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.
WARNING
- To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.
- Be careful not to touch or press the screen area when adjusting the angle of the monitor.
Pivot Feature
The pivot feature allows the monitor to rotate 90° clockwise.
WARNING
- To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand does not make contact with the monitor.
- Raise the monitor to the maximum height.
- Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
- Rotate the monitor clockwise as shown in the figure.
- Complete the installation by rotating the monitor 90° as shown below.
NOTE
- Auto Pivot feature of the display is not supported.
- The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating system. Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all.
Tidying up Cables
Arrange the cables using the cable holder as shown in the illustration.
(27GN65R,32GN55R)
(24GN65R,27GN65R,32GN55R)
Using the Kensington Lock
The connector for the Kensington security system is located at the bottom of
the monitor.
For more information on installation and usage, refer to the Kensington lock
owner’s manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
- The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other
compatible devices.
- Place the screen face down. To protect the monitor panel (screen), cover the surface with a soft cloth or the monitor protection pad included in the product package.
- Remove the four screws tightened on the back of the monitor.
- Place the wall mount plate onto the monitor and align it with the screw holes.
- Tighten the four screws using a screwdriver to fix the plate to the monitor.
NOTE
- The wall mount plate is sold separately.
- For more information on installation, refer to the wall mount plate’s installation guide.
- Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen.
Installing on the Wall
Install the monitor at least 100 mm (3.94 inches) away from the wall and leave
about 100 mm (3.94 inches) of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instructions can be obtained
from your local retail store. Alternatively, please refer to the manual for
how to install and set up a tilting wall mounting bracket.
To install the monitor to a wall, attach a wall mounting bracket (optional) to
the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and
to the wall.
- If you use screws longer than the standard length, it may damage the inside of the product.
- A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of nonstandard screws.
Wall Mount (mm) | 100 x 100 |
---|---|
Standard screw | M4 x L10 |
Number of screws | 4 |
Wall Mount Plate (Optional) | LSW 149 |
NOTE
- Use the screws specified by VESA standards.
- The wall mount kit includes the installation guide and all necessary parts.
- The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
- The length of the screw may differ for each wall mounting bracket. Be sure to use the proper length.
- For more information, please refer to the user manual for the wall mounting bracket.
CAUTION
-
Unplug the power cord before moving or installing the monitor to avoid electric shock.
-
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
-
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
-
Use the wall mounting bracket and screws that conform to VESA standards.
Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. -
When measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches) or less.
USING THE MONITOR
- Illustrations in this manual may differ from the actual product.
Press the joystick button, go to Menu → Input, and then select the input option.
CAUTION
- Do not press the screen for a prolonged time. This may cause image distortion.
- Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.
NOTE
-
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
-
The monitor may flicker when turned on in an area where the temperature is low.
This is normal. -
Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
- This monitor supports the *Plug and Play feature.
- Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION
- Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
- Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
- Recommended HDMI cable types
– High-Speed HDMI®/™ cable
– High-Speed HDMI®/™ cable with Ethernet
DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.
NOTE
- There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
- If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort) cable or gender that supports DisplayPort1.4. (sold separately)
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the
monitor.
NOTE
- Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
- Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
- Recommended HDMI cable types
– High-Speed HDMI®/™ cable
– High-Speed HDMI®/™ cable with Ethernet
Connecting Peripherals
Connecting Headphones
Connect peripherals to the monitor via the headphones port.
NOTE
-
Peripheral devices are sold separately.
-
If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones.
-
Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited.
USER SETTINGS
NOTE
- Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
- When Beep Guide is activated, pressing the joystick button will take you to Menu right away.
Activating the Main Menu
- Press the joystick button on the bottom of the monitor.
- Move the joystick up/down ( / ) and left/right ( / ) to set the options.
- Press the joystick button once more to exit the main menu.
Button | Menu Status | Description |
---|---|---|
Main menu disabled | Enables the main menu. | |
Main menu enabled | Enters the Menu feature. |
(Holding down the button to turn off the monitor. You can turn off the monitor
this way at any time, including when the OSD is on.)
| **| Main menu disabled| Adjusts the monitor volume level.
Main menu enabled| Enters the Input** features.
| Main menu disabled| Adjusts the monitor volume level.
Main menu enabled| Enters the Game Mode feature.
| | Main
menu disabled| Enters the Accessibility menu.
Main menu enabled| Turns off the monitor.
| Main menu disabled| Enters the Accessibility menu.
Main menu enabled| Exits the main menu.
Main Menu Features
A: Main Menu | Description |
---|---|
B: Power Off | Turns off the monitor. |
C: Input | Sets input mode. |
D: Game Mode | Sets the game mode for gaming. |
E: Menu | Configures the screen settings. |
F: Exit | Exits the main menu. |
User Settings
Menu Settings
- To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.
- Move the joystick up/down and left/right to set the options.
- To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
- If you want to exit the OSD menu, move the joystick to ****until you exit.
Game Mode on SDR(Non-HDR)signal.
Menu > Game Mode | Description |
---|---|
Game Mode | Gamer 1 |
including game-related options.
Gamer 1 and Gamer 2 picture modes allow you to save two sets of
customized display settings, including game-related setup options.
Gamer 2
FPS| This mode is optimized for FPS games.
RTS| This mode is optimized for RTS Game.
Vivid| Optimized the screen for vivid colors.
Reader| Optimizes the screen for viewing documents. You can brighten the
screen in the OSD menu.
HDR Effect| Optimizes the screen for high dynamic range.
Game Mode on HDR signal.
Menu > Game Mode | Description |
---|---|
Game Mode | Gamer 1 |
including game-related options.
Gamer 1 and Gamer 2 picture modes allow you to save two sets of
customized display settings, including game-related setup options.
Gamer 2
FPS| This mode is optimized for FPS games.It is suitable for very dark
FPS games.
RTS| This mode is optimized for RTS Game.
Vivid| Optimized the screen for vivid colors.
NOTE
• HDR content may not be operated properly depending on the Windows10 OS
setting. Please check the HDR On / Off setting of Windows.
• When the HDR function is turned on, the characters or picture quality may
be poor according to Graphic card performance.
• While the HDR function is on, screen flickering or cracking may occur when
changing the monitor input or power on/off according to Graphic card
performance.
Menu > Game Adjust| Description
---|---
Game Adjust| FreeSync Premium / Adaptive-Sync| Provides
seamless and natural images by synchronizing the vertical frequency of the
input signal with that of the output signal.
CAUTION
• Supported Interface: DisplayPort (Adaptive-Sync), HDMI (FreeSync
Premium)
• Supported Graphic Card : A graphic card that supports AMD’s FreeSync is
necessary.
• Supported Version : Make sure to update the graphic card to the latest
driver.
• For more information and requirement, refer to AMD website at
http://www.amd.com/FreeSync
• FreeSync Premium / Adaptive-Sync and Motion Blur Reduction cannot
be enabled simultaneously.
Extended| FreeSync Premium / Adaptive-Sync function on. (Enable wider
frequency range of FreeSync function than basic mode.)
Basic| FreeSync Premium / Adaptive-Sync function on. (Enable basic
frequency range of FreeSync function.)
Off| FreeSync Premium / Adaptive-Sync function off.
Game Adjust| Motion Blur Reduction| On| This mode minimizes
motion blur in fast-moving videos. To take full advantage of this function,
select 1920 x 1080 @ 120Hz/144Hz before enabling Motion Blur Reduction.
This function is available for the following vertical frequency. (120Hz/144Hz)
---|---|---|---
Off| Turns Motion Blur Reduction Mode off.
Motion Blur Reduction| NOTE
• To reduce motion blur, brightness is reduced with backlight control.
• Motion Blur Reduction and FreeSync feature can not used at the same
time.
• This function is game-optimized.
• It is recommended to turn off when you are not using the gaming function.
• Flicker may occur during Motion Blur Reduction operation.
Black Stabilizer| You can control the black contrast to have better
visibility in dark scenes. You can easily distinguish objects on dark game
screens.
Game Adjust| Response Time| Sets a response time for displayed
pictures based on the speed of the screen. For a normal environment, it is
recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Once Faster Mode is selected, Motion Blur may occur depending on the
content.
---|---|---
Faster| Sets the response time to Faster.
Fast| Sets the response time to Fast.
Normal| Sets the response time to Normal.
Off| Does not use the response time improvement feature.
Crosshair
| Crosshair provides a mark on the center of the screen for First Person
Shooter (FPS) games. Users can select the Crosshair that fits their gaming
environment among four different Crosshairs.
• When the monitor is off or enters energy saving mode, the Crosshair feature
is automatically turned off.
FPS Counter| On| The indicator is displayed on the upper left of
the screen. It will reflect the actual frame rate that is received at the
input.
Off| Does not use the FPS Counter feature.
NOTE
• FPS Counter and Crosshair feature can not be used at the same
time.
Game Reset| Do you want to reset your Game settings?
No| Cancel the select.
Yes| Returns to the default settings.
Menu > Picture Adjust| Description
---|---
Picture Adjust| Brightness| Adjusts the brightness of the screen.
Contrast| Adjusts the contrast of the screen.
Sharpness| Adjusts the sharpness of the screen.
Gamma
| Mode 1, Mode 2,
Mode 3
| The higher the gamma value, the darker the image becomes. Likewise, the
lower the gamma value, the lighter the image becomes.
Mode 4| If you do not need to adjust the gamma settings, select Mode 4.
Color Temp| Custom| The user can adjust it to red, green, or blue
by customization.
Warm| Sets the screen color to a reddish tone.
Medium| Sets the screen color to between a red and blue tone.
Cool| Sets the screen color to a bluish tone.
Manual| The user can fine – tune the color temperature.
R/G/B| You can customize the picture color using Red , Green ,
and Blue colors.
Six Color| Meets the user requirements for colors by adjusting the hue
and saturation of the six colors and then saving the settings.
Hue| Adjusts the tone of the screen colors.
Saturation| Adjusts the saturation of the screen colors. The lower the
value, the less saturated and brighter the colors become. The higher the
value, the more saturated and darker the colors become.
Black Level| Sets the offset level (for HDMI only).
Offset : as a reference for a video signal, this is the darkest color the
monitor can display.
High| Keeps the current contrast ratio of the screen.
Low| Lowers the black levels and raises the white levels from the
current contrast ratio of the screen.
Picture Adjust| DFC| On| Adjusts the brightness automatically
according to the screen.
---|---|---|---
Off| Disables the DFC feature.
Picture Reset| Do you want to reset your picture settings?
No| Cancel the select.
Yes| Returns to the default settings.
Menu > Input| Description
---|---
Input| Input List| Selects the input mode.
Aspect Ratio| Adjusts the aspect ratio of the screen.
Full Wide| Displays the video in widescreen, regardless of the video
signal input.
Original| Displays video according to the aspect ratio of the video
signal input.
NOTE
• The display may look the same for Full Wide and Original options
at the recommended resolution. (1920 x 1080)
Auto Input Switch| When automatic input switch is set to On ,
display will automatically switch to new input when connected.
On| Enables Auto Input Switch.
Off| Disables Auto Input Switch.
Menu > General| Description
---|---
General| Language| Sets the menu screen to the desired language.
User-defined Key 1| You can customise the main menu to access your
preferred menu easily.
User-definded Key 1 and User-definded Key 2 appear at the left/right of the
main menu.
User-defined Key 2
SMART ENERGY SAVING| High| Saves energy using the high-
efficiency SMART ENERGY SAVING feature.
Low| Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Off| Disables the SMART ENERGY SAVING feature.
NOTE
• The value of energy saving data may differ depending on panel and panel
suppliers.
• If you select the option of SMART ENERGY SAVING is High or Low
, monitor luminance become lower or higher depend on source.
Power LED
| On| The power LED turns on automatically.
Off| The power LED turns off.
Deep Sleep Mode| When Deep sleep mode is enabled, power consumption is
minimized while the monitor is in standby mode.
On| Enables Deep sleep Mode.
Off| Disables Deep sleep Mode.
NOTE
• If Deep Sleep Mode is Off , monitor only turns off the back
light while the monitor is standby mode.
Automatic Standby| Feature that automatically turns off the monitor when
there is no movement on the screen for a period of time. You can set a timer
for the auto-off function. ( 8H , 6H , 4H and Off )
General|
Input Compatibility Version
| Please set the Input Compatibility Version to match the version of the
connected external device.
---|---|---
HDMI| 2.0/1.4
If you want to use the HDR, select the Input Compatibility Version to 2.0 or
1.4.
DisplayPort| 1.4/1.2/1.1
If you want to use the HDR, select the Input Compatibility Version to 1.4 or
1.2 or 1.1.
Buzzer| This feature lets you set the sound generated from Buzzer when
your monitor powers on.
On| Enables your monitor’s Buzzer.
Off| Disables your monitor’s Buzzer.
OSD Lock| This feature disables the configuration and adjustment of
menus.
On| Enables OSD Lock.
Off| Disables OSD Lock.
NOTE
• All features are disabled except Brightness, Contrast in Picture
Adjust , Input , OSD Lock and Information in General.
Information| The display information will be shown the Total Power On
Time, Resolution.
Reset to Initial Settings| Do you want to reset your settings?
No| Cancel the select.
Yes| Returns to the default settings.
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor’s power cord plugged in?| • Check if the power cord is
correctly plugged into the power outlet.
Is the power LED on?| • Check the power cable connection and press the power
button.
Is the power on and the power LED displaying white?| • Check that the
connected input is enabled ( Menu > Input ).
Is the power LED blinking?| • If the monitor is in sleep mode, move the
mouse, or press any key on the keyboard, to switch the display on.
• Check if the computer is turned on.
Is the The screen is not currently set to the recommended resolution. If
you have no video or the screen flickers, see the troubleshooting
guide in the product owner’s manual. message being displayed?| • This
occurs when signals transferred from the PC (graphics card) are out of the
recommended horizontal or vertical frequency range of the monitor. Please see
the Product Specification section of this manual to set the appropriate
frequency.
Is the No Signal message being displayed?| • This is displayed when
the signal cable between the PC and the monitor is missing or disconnected.
Check the cable and reconnect it.
Have you installed the display driver?| • Be sure to install the display
driver from our web site: http://www.lg.com.
• Make sure to check if the graphics card supports Plug and Play function.
Some features are disabled.
Are some functions not available when you press the Menu button?| • The OSD
is locked. Go to Menu > General and set OSD Lock to Off.
The screen retains an image.
Does image sticking occur even when the monitor is turned off?| • Displaying
a still image for a prolonged time may cause damage to the screen, resulting
in the retention of the image.
• To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky. / Images displayed on the monitor
leave shadow trails.
Did you select the appropriate resolution?| • If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.
NOTE
-
Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz.
-
Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is represented by kHz.
-
Check if the graphics card’s resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution Control Panel > Display > Menu in Windows. (The settings may differ depending on the operating system (OS) you use.)
-
Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
-
The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the
graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance. -
Some graphics cards may not support 1920 x 1080 resolution. If the resolution cannot be displayed, contact the manufacturer of your graphics card.
The display color is abnormal.
Does the display appear discolored (16 colors)?| • Set the color to 24 bit
(true color) or higher. In Windows, go to Control Panel > Display >
Menu > Color Quality. (The settings may differ depending on the
operating system (OS) you use.)
Does the display color appear unstable or monochrome?| • Check if the signal
cable is connected properly. Reconnect the cable or reinsert the PC’s graphics
card.
Are there spots on the screen?| • When using the monitor, pixilated spots
(red, green, blue, white, or black) may appear on the screen. This is normal
for an LCD screen. It is not an error, nor is it related to the monitor’s
performance.
No sound from the headphone port.
Are images displayed using DP (DisplayPort) or HDMI input without sound?| •
Make sure that the headphone port connections are made properly.
• Try increasing the volume with the joystick.
• Set the audio output of the PC to the monitor you are using. On Microsoft
Windows, go to Control Panel > Hardware and Sound > Sound > set
the Monitor as default device. (The settings may differ depending on the
operating system (OS) you use.)
PRODUCT SPECIFICATION
24GN65R
LCD Screen | Color Depth | 8-bit / 10-bit color is supported. |
---|---|---|
Resolution | Max Resolution | 1920 x 1080 @ 144 Hz |
Recommended Resolution | 1920 x 1080 @ 144 Hz | |
Power Sources | Power Rating | 19 V __ 1.6 A |
Power Consumption (Typical) | On mode: 28 W Typ. (Outgoing condition)* Sleep |
Mode (Standby Mode): ≤ 0.5 W ** Off Mode: ≤ 0.3 W
AC/DC Adapter| ADS-45SQ-19-3 19032E type, manufactured by SHENZHEN HONOR
ELECTRONIC
Or ADS-45FSQ-19 19032EPG-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19032EPK-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19032EPCU-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19032EPBR-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19032EPI-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or AD10550LF type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2138S20 type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2138620 type, manufactured by PI Electronics (H.K.) Ltd.
Output: 19 V 1.7 A
Environmental Conditions| Operating Conditions| Temperature| 0 °C to 40 °C (32
°F to 104 °F)
Humidity| Less than 80 %
Storing Conditions| Temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Humidity| Less than 85 %
Dimensions| Monitor Size (Width x Height x Depth)
---|---
With Stand| 540.8 x 551.1 x 291.2 (mm)
21.2 x 21.6 x 11.4 (inches)
Without Stand| 540.8 x 323.8 x 42.8 (mm)
21.2 x 12.7 x 1.6 (inches)
Weight (Without Packaging)| With Stand| 5.6 kg (12.3 lbs)
Without Stand| 3.4 kg (7.4 lb)
Specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The Power Consumption level can be different by operating condition and
monitor setting.
- The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
27GN65R
LCD Screen | Color Depth | 8-bit / 10-bit color is supported. |
---|---|---|
Resolution | Max Resolution | 1920 x 1080 @ 144 Hz |
Recommended Resolution | 1920 x 1080 @ 144 Hz | |
Power Sources | Power Rating | 19 V __ 2.0 A |
Power Consumption (Typical) | On mode: 32 W Typ. (Outgoing condition)* Sleep |
Mode (Standby Mode): ≤ 0.5 W ** Off Mode: ≤ 0.3 W
AC/DC Adapter| ADS-45SN-19-3 19040G type, manufactured by SHENZHEN HONOR
ELECTRONIC
Or ADS-45SQ-19-3 19040E type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPG-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPK-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPCU-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPBR-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or AD10530LF type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2137S20 type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2137620 type, manufactured by PI Electronics (H.K.) Ltd.
Output: 19 V 2.1 A
Environmental Conditions| Operating Conditions| Temperature| 0 °C to 40 °C (32
°F to 104 °F)
Humidity| Less than 80 %
Storing Conditions| Temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Humidity| Less than 85 %
Dimensions| Monitor Size (Width x Height x Depth)
---|---
With Stand| 614.2 x 575.9 x 291.2 (mm)
24.1 x 22.6 x 11.4 (inches)
Without Stand| 614.2 x 364.8 x 51.7 (mm)
24.1 x 14.3 x 2.0 (inches)
Weight (Without Packaging)| With Stand| 7.2 kg (15.8 lbs)
Without Stand| 5.1 kg (11.2 lbs)
Specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The Power Consumption level can be different by operating condition and
monitor setting.
- The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
32GN55R
LCD Screen | Color Depth | 8-bit / 10-bit color is supported. |
---|---|---|
Resolution | Max Resolution | 1920 x 1080 @ 165 Hz |
Recommended Resolution | 1920 x 1080 @ 165 Hz | |
Power Sources | Power Rating | 19 V __ 2.0 A |
Power Consumption (Typical) | On mode: 38 W Typ. (Outgoing condition)* Sleep |
Mode (Standby Mode): ≤ 0.5 W ** Off Mode: ≤ 0.3 W
AC/DC Adapter| ADS-45SN-19-3 19040G type, manufactured by SHENZHEN HONOR
ELECTRONIC
Or ADS-45SQ-19-3 19040E type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPG-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPK-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPCU-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or ADS-45FSQ-19 19040EPBR-1 type, manufactured by SHENZHEN HONOR ELECTRONIC
Or LCAP21C type, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Or LCAP26B-E type, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Or LCAP26B-A type, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Or AD10530LF type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2137S20 type, manufactured by PI Electronics (H.K.) Ltd.
Or AD2137620 type, manufactured by PI Electronics (H.K.) Ltd.
Output: 19 V 2.1 A
Environmental Conditions| Operating Conditions| Temperature| 0 °C to 40 °C (32
°F to 104 °F)
Humidity| Less than 80 %
Storing Conditions| Temperature| -20 °C to 60 °C (-4 °F to 140 °F)
Humidity| Less than 85 %
Dimensions| Monitor Size (Width x Height x Depth)
---|---
With Stand| 714.7 x 600.3 x 292.1 (mm)
28.1 x 23.6 x 11.5 (inches)
Without Stand| 714.7 x 428 x 50.9 (mm)
28.1 x 16.8 x 2.0 (inches)
Weight (Without Packaging)| With Stand| 7.2 kg (15.8 lbs)
Without Stand| 5.1 kg (11.2 lbs)
Specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The Power Consumption level can be different by operating condition and
monitor setting.
- The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
Factory Support Mode
(Preset Mode, HDMI/ DisplayPort PC)
24GN65R 27GN65R
Preset Mode| Horizontal Frequency (kHz)| Vertical Frequency
(Hz)| Polarity (H/V)| Remarks
---|---|---|---|---
640 x 480| 31.469| 59.94| -/-|
800 x 600| 76.302| 120| +/-|
800 x 600| 37.879| 60.317| +/+|
1024 x 768| 48.363| 60.0| -/-|
1024 x 768| 97.551| 120| +/-|
1920 x 1080| 67.50| 60| +/+|
1920 x 1080| 84.36| 74.99| +/+| HDMI 1.4
1920 x 1080| 137.26| 119.98 (120)| +/+| DisplayPort
1920 x 1080| 166.59| 143.98| +/-| Preferred Timing
2560 x 1440| 111.86| 74.97| +/-|
32GN55R
Preset Mode| Horizontal Frequency (kHz)| Vertical Frequency
(Hz)| Polarity (H/V)| Remarks
---|---|---|---|---
640 x 480| 31.469| 59.94| -/-|
800 x 600| 76.302| 120| +/-|
800 x 600| 37.879| 60.317| +/+|
1024 x 768| 48.363| 60.0| -/-|
1024 x 768| 97.551| 120| +/-|
1920 x 1080| 67.50| 60| +/+|
1920 x 1080| 84.36| 74.99| +/+| HDMI 1.4
1920 x 1080| 137.26| 119.98 (120)| +/+| DisplayPort
1920 x 1080| 166.59| 143.98| +/-|
1920 x 1080| 181.83| 165.0| +/-| Preferred Timing
2560 x 1440| 111.86| 74.97| +/-|
HDMI Timing (Video)
Preset Mode| Horizontal Frequency (kHz)| Vertical Frequency
(Hz)| Remarks
---|---|---|---
480P| 31.5| 60|
720P| 45| 60|
1080P| 67.5| 60|
1080P| 135| 120| Only HDMI 2.0 and HDMI Freesync
Power LED
Mode | LED Color |
---|---|
On Mode | Red (For a few seconds) |
Sleep Mode (Standby Mode) | Off |
Off Mode | Off |
Beep Guide
Menu | Location |
---|---|
Game Mode | 1 |
Game Mode – Gamerl | 11 |
Game Mode – Gamer2 | 12 |
Game Mode – FPS | 13 |
Game Mode – RTS | 14 |
Game Mode – Vivid | 15 |
Game Mode – Reader | 16 |
Game Mode – HDR Effect | 17 |
Game Adjust | 2 |
Game Adjust – FreeSync Premium / Adaptive-Sync | 21 |
Game Adjust – FreeSync Premium / Adaptive-Sync – Extended | 211 |
Game Adjust – FreeSync Premium / Adaptive-Sync – Basic | 212 |
Game Adjust – FreeSync Premium / Adaptive-Sync – Off | 213 |
Game Adjust – Motion Blur Reduction | 22 |
Game Adjust – Motion Blur Reduction – On | 221 |
Game Adjust – Motion Blur Reduction – Off | 222 |
Game Adjust – Black Stabilizer | 23 |
Game Adjust – Black Stabilizer | 2 3 1 Slider |
Game Adjust – Response Time | 24 |
Game Adjust – Response Time – Faster | 241 |
Game Adjust – Response Time – Fast | 242 |
Game Adjust – Response Time – Normal | 243 |
Game Adjust – Response Time – Off | 244 |
Game Adjust – Crosshair | 25 |
Game Adjust – Crosshair – Red Cross | 251 |
Game Adjust – Crosshair – Green Cross | 252 |
Game Adjust – Crosshair – Red Dot | 253 |
Game Adjust – Crosshair – Green Dot | 254 |
Game Adjust – Crosshair – Off | 255 |
Game Adjust – FPS Counter | 26 |
Game Adjust – FPS Counter – On | 261 |
Game Adjust – FPS Counter – Off | 262 |
Game Adjust – Game Reset | 27 |
Game Adjust – Game Reset – No | 271 |
Game Adjust – Game Reset – Yes | 272 |
Picture Adjust | 3 |
Picture Adjust – Brightness | 31 |
Picture Adjust – Brightness | 3 1 1 Slider |
Picture Adjust – Contrast | 32 |
Picture Adjust – Contrast | 321 Slider |
Picture Adjust – Sharpness | 33 |
Picture Adjust – Sharpness | 3 3 1 Slider |
Picture Adjust – Gamma | 34 |
Picture Adjust – Gamma – Mode 1 | 341 |
Picture Adjust – Gamma – Mode 2 | 342 |
Picture Adjust – Gamma – Mode 3 | 343 |
Picture Adjust – Gamma – Mode 4 | 344 |
Picture Adjust – Color Temp | 35 |
Picture Adjust – Color Temp – Custom | 351 |
Picture Adjust – Color Temp – Warm | 352 |
Picture Adjust – Color Temp – Medium | 353 |
Picture Adjust – Color Temp – Cool | 354 |
Picture Adjust – Color Temp – Manual | 355 |
Picture Adjust – Color Temp – Manual | 3 5 5 1 Slider |
Picture Adjust – R/G/B | 36 |
Picture Adjust – R/G/B – Red | 3 6 1 Slider |
Picture Adjust – R/G/B – Green | 3 6 2 Slider |
Picture Adjust – R/G/B – Blue | 3 6 3 Slider |
Picture Adjust – Six Color | 37 |
Picture Adjust – Six Color – Red Hue | 3 7 1 Slider |
Picture Adjust – Six Color – Red Saturation | 3 7 2 Slider |
Picture Adjust – Six Color – Green Hue | 3 7 3 Slider |
Picture Adjust – Six Color – Green Saturation | 3 7 4 Slider |
Picture Adjust – Six Color – Blue Hue | 3 7 5 Slider |
Picture Adjust – Six Color – Blue Saturation | 3 7 6 Slider |
Picture Adjust – Six Color – Cyan Hue | 3 7 7 Slider |
Picture Adjust – Six Color – Cyan Saturation | 3 7 8 Slider |
Picture Adjust – Six Color – Magenta Hue | 379 Slider |
Picture Adjust – Six Color – Magenta Saturation | 3 7 10 Slider |
Picture Adjust – Six Color – Yellow Hue | 3 7 11 Slider |
Picture Adjust – Six Color – Yellow Saturation | 3 7 12 Slider |
Picture Adjust – Black Level | 38 |
Picture Adjust – Black Level – High | 381 |
Picture Adjust – Black Level – Low | 3 8 2 |
Picture Adjust – DFC | 3 9 |
Picture Adjust – DFC – On | 3 9 1 |
Picture Adjust – DFC – Off | 3 9 2 |
Picture Adjust – Picture Reset | 3 10 |
Picture Adjust – Picture Reset – No | 3 10 1 |
Picture Adjust – Picture Reset – Yes | 3 10 2 |
Input | 4 |
Input – Input List | 4 1 |
Input – Input List – HDMI | 4 1 1 |
Input – Input List – DisplayPort | 4 1 2 |
Input – Aspect Ratio | 4 2 |
Input – Aspect Ratio – Full Wide | 4 2 1 |
Input – Aspect Ratio – Original | 4 2 2 |
Input – Auto Input Switch | 4 3 |
Input – Auto Input Switch – On | 4 3 1 |
Input – Auto Input Switch – Off | 4 3 2 |
General | 5 |
General – Language | 5 1 |
General – Language – English | 5 1 1 |
General – Language – German | 5 1 2 |
General – Language – French | 5 1 3 |
General – Language – Spanish | 5 1 4 |
General – Language – Italian | 5 1 5 |
General – Language – Swedish | 516 |
General – Language – Finnish | 517 |
General – Language – Portuguese | 518 |
General – Language – Portuguese (Brazil) | 519 |
General – Language – Polish | 5110 |
General – Language – Russian | 5111 |
General – Language – Greek | 5112 |
General – Language – Ukrainian | 5113 |
General – Language – Chinese | 5114 |
General – Language – Traditional Chinese | 5115 |
General – Language – Japanese | 5116 |
General – Language – Korean | 5117 |
General – User-defined Key 1 | 52 |
General – User-defined Key 1 – Input | 521 |
General – User-defined Key 1 – Game Mode | 522 |
General – User-defined Key 1 – Crosshair | 523 |
General – User-defined Key 1 – Black Stabilizer | 524 |
General – User-defined Key 1 – Response Time | 525 |
General – User-defined Key 1 – FPS Counter | 526 |
General – User-defined Key 2 | 53 |
General – User-defined Key 2 – Input | 531 |
General – User-defined Key 2 – Game Mode | 5 3 2 |
General – User-defined Key 2 – Crosshair | 5 3 3 |
General – User-defined Key 2 – Black Stabilizer | 5 3 4 |
General – User-defined Key 2 – Response Time | 5 3 5 |
General – User-defined Key 2 – FPS Counter | 5 3 6 |
General – SMART ENERGY SAVING | 5 4 |
General – SMART ENERGY SAVING – High | 5 4 1 |
General – SMART ENERGY SAVING – Low | 5 4 2 |
General – SMART ENERGY SAVING – Off | 5 4 3 |
General – Power LED | 5 5 |
General – Power LED – On | 5 5 1 |
General – Power LED – Off | 5 5 2 |
General – Deep Sleep Mode | 5 6 |
General – Deep Sleep Mode – On | 5 6 1 |
General – Deep Sleep Mode – Off | 5 6 2 |
General – Automatic Standby | 5 7 |
General – Automatic Standby – 8H | 5 7 1 |
General – Automatic Standby – 6H | 5 7 2 |
General – Automatic Standby – 4H | 5 7 3 |
General – Automatic Standby – Off | 5 7 4 |
General – Input Compatibility Version | 5 8 |
General – Input Compatibility
Version(HDMI) – 2.0| 5 8 1
General – Input Compatibility
Version(HDMI) – 1.4| 5 8 2
General – Input Compatibility
Version(Displayport) – 1.4| 5 8 1
General – Input Compatibility
Version(Displayport) – 1.2| 5 8 2
General – Input Compatibility
Version(Displayport) – 1.1| 5 8 3
General – Buzzer| 5 9
General – Buzzer – On| 5 9 1
General – Buzzer – Off| 5 9 2
General – OSD Lock| 5 10
General – OSD Lock – On| 5 10 1
General – OSD Lock – Off| 5 10 2
General – Information| 5 11
General – Reset to Initial Settings| 5 12
General – Reset to Initial Settings – No| 5 12 1
General – Reset to Initial Settings – Yes| 5 12 2
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address
111 Sylvan Avenue, North Building,
Englewood Cliffs, NJ 07632
E-mail lg.environmental@lge.com
The model and serial number of the product are located on the back and on one
side of the product.
Record them below in case you ever need service.
Model____
Serial No.___
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
References
- Computer Products & Accessories: Locks & Docks | Kensington
- LG Electronics & Home Appliances | Shop Now | LG USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>