Seik SC-9060AU9FLC Front Load Washer/Dryer Combo Instruction Manual

SC-9060AU9FLC Front Load Washer/Dryer Combo
Instruction Manual
9KG/6KG FRONT LOAD WASHER/DRYER COMBO SC-9060AU9FLC

Please read this manual carefully before using, and keep it for future reference.

GENERAL SAFETY

IMPORTANT INFORMATION
Read this manual thoroughly before you start using the Front Load Washing Machine. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Pay close attention to messages that follow this safety alert symbol or the words DANGER, WARNING or CAUTION. These words will be used to alert you of potential hazards that and injure you and others. Following these instruction will tell you how to reduce the chance of injury and the possible dangers if instructions aren’t followed.
WARNING
This symbol indicates when there is a serious risk of injury if you do not pay attention to the warnings.
CAUTION
This symbol indicates when to be careful to avoid a serious risk of injury to oneself or damage to property.

ELECTRICAL SAFETY

• Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power outlet, it must be in good working order.

• Power connection: Do not use an adaptor or an extension cord.
  Plug the power plug directly into a separate power point that cannot be accidentally turned off, and that is easily accessible so you can switch it off if needed.

• Power cord: Do not kink or damage the power supply cord. Make sure it is behind the appliance so no one can step on or place anything on the power supply cord or against it. A damaged power plug may overheat and cause a fire.

• Damaged cord: Do not use a cord that shows cracks or damage. Any damage to the cord may cause a short circuit, fire and/or electric shock.
  Contact our support centre on 1300 296 699 for advice

• Disconnection: Never pull the power cord to unplug appliance.
  Grip the plug and pull straight out from the power point.

• Electrical work: If the installation of this appliance requires any electrical work, make sure it is carried out by an electrician.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
To reduce risk of fire, electric shock or injury, always follow these basic precautions and accident prevention measures when using this appliance, including the below:
NOTE: This appliance should be installed by an authorised technician else warranty will be void.

INSTALLATION

• The product is heavy, be careful when moving it. To avoid back or other injury, have 2 people lift or mechanical aid when installing.
• When unboxing, thoroughly inspect the appliance carefully for any damage. If there is any damage, do not install the appliance. Contact our support centre on 1300 296 699 for advice.
• While installing the appliance make sure that the power cord is not bent or flattened.
• Make sure to remove all packaging materials such as foams and tapes before installing the appliance.
• Make sure if the machine is to be placed on carpet that the ventilation openings in the base are not obstructed
• Install the washing machine on a flat level and stable ground.
• If not wall mounted, be sure that the appliance is not placed on any soft materials such as plastics or foams.
• Do not install appliance in a tight fitted cabinet.
• Do not install appliance near other heat sources such as radiators, heaters or direct sunlight.
• Install appliance on a flat level and stable ground.

WARNING

• Make sure that transport packaging is removed from the rear of the dryer. Do not overload the washer/dryer with too many clothes.
• Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels.
• Appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.

USAGE CONDITIONS AND RESTRICTIONS

• Supervision over children is to ensure that they do not play with the appliance. Never allow them to use, play with or crawl inside the appliance. Cleaning and maintenance must not be done by children.
• This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are being supervised or been given instructions on how to use of the appliance in a safe way and understand the hazards with using this appliance incorrectly.
• Only for indoor domestic use only. It is not to be used for industrial or commercial use.
• Do not use this product for anything other than its intended purpose, and only use it as described in this manual. Do not attempt to alter or modify this appliance.
• In the process of a hot wash, the door window can become hot. Make sure not to touch it or that no children or pets come into contact with the door window.
• Ensure that emptying all pockets of every item to make sure that there is no hard, sharp objects such as coins, safety pins, bra wires, nails or screws can cause damage to the appliance and has a chance to block the pump.
• Damage or malfunction caused from foreign objects is not covered by your warranty to the appliance.
• Do not operate this appliance outdoors.
• Incorrect use can result in property damage, injury or death. We assume no liability for misuse of the appliance or noncompliance with these instructions.
• Maximum load of dry clothes is 6.0 kg for Drying / 9.0 kg for Washing.
• Do not block any ventilation openings. Ensure that vents are not covered by anything.
• Do not use this product for anything other than its intended purpose, and only use it as described in this manual. Do not attempt to alter or modify this appliance.
• Only load items that are suitable for the clothes dryer.
• Do not place any open source flames on the dryer such as candles, etc..
• The door/window will be hot after a long cycle, be sure not to touch the window and to keep children away from the appliance.
• WARNING: Never stop a tumble dryer before the end of the cycle unless all items are quickly removed and spread out so that the heat is dissipated.
• The only part that can be changed is the filter, other than this nothing else in the dryer contains user serviceable parts. Do not open, dissemble or try to repair the appliance yourself. Only have this appliance serviced by a qualified technician.
• Incorrect use can result in property damage, injury or death. We assume no liability for misuse of the appliance or noncompliance with these instructions.

CLEANING AND MAINTENANCE

• Before cleaning or maintenance, always unplug the appliance from the power socket. Make sure you pull by the plug, not the cord as this can damage the power cord and cause a hazard.
• Only the filter requires regular cleaning, everything else is non user-serviceable parts. Do not try to repair, disassemble or modify the appliance.
• Check and clean the lint filter on a regular basis. Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks. Remove any coins, buttons and other objects from the seal after each wash.
• Service: Never try to repair, modify or replace any part of the appliance, unless this manual says you can do so. All other servicing is to be done by a qualified technician, or contact our support centre on 1300 296 699 for advice.

CAUTION
ITEMS BELOW ARE NOT SUITABLE FOR DRYING. IT CAN CAUSE FIRE IN THE APPLIANCE OR EXTENSIVE DAMAGE. DO NOT PLACE FOLLOWING IN THE APPLIANCE

• Items containing rubber or foam like rubber or any other similar textured materials.
• Items that are spotted or soaked with cooking oil or any other flammable items. These other items include kerosene, stain removers, dry-cleaning solvents, alcohol, petrol, turpentine, waxes, hair care products, wax removers.
• Washing the items vigour sly beforehand in hot water with extra detergent will reduce, but not completely eliminate the hazard.
• Undergarments that contain metal reinforcements (such as underwire bras). Plastic articles such shower caps and waterproof bibs.
• Rubber-backed articles, clothes with foam rubber pads, pillows, galoshes and rubber coated tennis shoes.
• Fabric softeners or similar products unless recommended by product manufacturer for use in a clothes dryer.

CAUTION

• Do not use the tumble dryer if industrial chemicals have been used for cleaning.
• Do not dry unwashed items in the dryer.
• Do not allow lint to accumulate around the tumble dryer. Clean the Lint Trap and filter after every use.
• Enough ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels including open fires.
• Remove all objects from pockets such as lighters and matches.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.

This symbol alerts you to take care as oil-affected items can ignite, especially when exposed to heat, such as in a clothes dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation causes heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so it will create a fire hazard.

Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.

• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
• Remove all objects from pockets such as lighters and matches.
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.

WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

PRODUCT OVERVIEW

Accessories

CONTROL PANEL

1. On/Off button: Product is switched on or off
2. Dry button: Press the button to change from “Intelligent Drying”, “Timing 120 minutes”, “Timing 60 minutes”. “Timing 30 minutes” and “Cancel”.
3. Temp. Button: Select water temperature according to the variety and contamination degree. Different procedure water temperature rage, some no choice.
4. Speed button: Select the speed according to the capacity and variety of cloths. Different procedure, different speed select range, but the speed of drum clearance no choice.
5. Start/Pause button: Press it to start or pause.
6. Child-Lock Button: Press Temp. + Speed for more than 3 seconds to ON/OFF Child Lock function. Press it to guard against child operating. Child-Lock operating,  ther buttons unavailable except ON/OFF.
7. Pre Delay Button: Press Dry + Temp. For more than 3 seconds to start the pre delay function. When the pre delay time is displayed, press Dry + Temp. button for 3 seconds to adjust the pre delay time. Delay time refers to the period from appoint to end.
8. Display screen: To display the remaining time or pre delay time. Remaining time gradually reduce in accordance with the washing. During the process of washing, if there is a abnormal phenomenon, the screen will display the error code accordingly. If the remaining time is different with the real time, the program will adjust according to the real situation. It is not an error.
9. Program button: Select program according to variety and contamination of cloths. The programs can be selected according to requirements.
   • Dry – Low-temp.Drying – Air Wash – Duvet – Down Jacket – Eliminate Mite – Cotton – Quick 15’ – Wool – Rinse+Spin – Spin – Tub Clean.

OPERATIONS

Drying hints

• Clothes could be dried after spinning
• To ensure quality dry the textiles,please classify them according to their kinds and the drying temperature.
• Synthetic should be set the proper drying time.
• If you want to iron the clothes after drying,please put them for a while.

Clothes not suitable for drying

• Particularly delicate items such as synthetic curtains, wooden and silk, clothes with metal inserts, nylon stockings, bulky clothes, such as anoraks, bed covers, quilts, sleeping bags and duvets must not be dried.
• Clothes padded with foam-rubber or materials similar to foam-rubber must not be machine dried.
• Fabrics containing residues of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapors

GETTING STARTED

Before installing your appliance, read all safety instructions in this manual, especially the sections on electrical safety and installation.
UNPACKING

• When unpacking the appliance, be sure to keep all the packaging materials until you have made sure your new appliance is undamaged and in good working order. Plastic can be a suffocation hazard for babies and young children, make sure the materials are out of their reach.

TRANSPORTATION

• CAUTION: VERY HEAVY! Be sure to team lift the appliance with someone or mechanical aid is required when moving the appliance. Keep the appliance upright as possible when moving the appliance.

REMOVE TRANSPORT BOLTS

• IMPORTANT! Make sure before you install the appliance, you must remove the transit bolts from the back of the appliance and cover the holes with the hole covers provided. A spanner is required to remove the bolts.

NOTE: Keep the transit bolts for future needs if you are going to move the appliance again to another location. The bolts hold the drum in place during transportation but MUST be removed before use so the drum can move during a wash. Leaving the bolts in can result in strong shock, noise and malfunction.

LEVELLING THE APPLIANCE
IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the most accurate levelling of the appliance. This is a must if your floor in unbalanced to level the washing machine.

• Make sure to position the appliance on a level and stable ground. If the floor is uneven you can adjust the feet by twisting foot then with a spanner you twist the lock nut to the top to lock it in place.
• By placing a spirit level on top of the appliance you can check correctly to aid you in adjusting the feet levelling nuts to adjust the appliance to be completely level.

INSTALLATION AREA
IMPORTANT! When installing the appliance the spacing on the side and behind the appliance must not be less the 20mm to allow proper ventilation.

Note: Make sure to avoid direct sunlight onto the appliance.

CONNECTING THE WATER INLET HOSE
IMPORTANT! To prevent leakage or water damage please follow the below instructions. Do not kink, crush, modify or sever the water inlet hose.
Minimum Inlet Water Pressure: 0.05MPa
Maximum Inlet Water Pressure: 1MPa
Be sure to only use new hose sets when connecting the washing machine. Do not re-use old hoses.
CONNECT THE INLET PIPE
Connect the inlet pipe as indicated in the figure. There are 2 ways to connect the inlet pipe.
INSTALL INLET PIPE

1. Connect the elbow to tap and fasten it clockwise.
2. Connect the other end of inlet pipe to the inlet valve at the backside of washing machine and fasten the pipe tightly clockwise. Notes: If there is any leakage with hose after connecting, then repeat the steps to connect inlet pipe. The most common type of tap shall be used to supply water. If the tap is square or too big, then the tap should be changed to a standard one.

CONNECTION BETWEEN SCREW TAP AND INLET HOSE.

1. Tap with threads and inlet hose
2. Special tap for washing machine
3. Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise.

CONNECTING THE DRAIN HOSE
Do not kink or protract the drain hose. Position the drain hose correctly otherwise damage will result in water leakage.
There are two ways to place the end of drain hose:

1. Put it through the water trough.
2. Connect it to the branch drain pipe.

When installing the drain hose into the laundry sink, make sure it is properly fitted with rope to hold it in place. If the hose is too long, do not try to push the end were it comes from the appliance in to shorten length, this can damage it.

WARNING

• Make sure that the hose is not higher then 120 cm above the ground, otherwise appliance will not drain the water well.
• Never lay down the drain hose otherwise water will pour out.
• Make sure the hose has no kinks so it can drain properly.

Electrical connection

• As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your home can meet the normal loading requirements of the electrical appliances.
• Please connect the power to a socket which is correctly installed and properly earthed.
• Make sure the power voltage at your place is same to that in the machine’s rating label.
• Power plug must match the socket and cabinet must be properly and effectively earthed.
• Do not use multi-purpose plug or socket as extension cord.
• Do not connect and pull out plug with wet hand.
• When connecting and pulling out the plug, hold the plug tightly and then pull it out.
  Do not pull power cord forcibly.

If power cord is damaged or has any sign of being broken, special power cord must be selected or purchased from its manufacturer or service center for replacement.

WARNING

• This machine must be earthed properly. If there is any short circuit, earthing can reduce the danger of electrical shock. This machine is equipped with power cord, which includes plug, earthing wire at earthing terminal.
• Washing machine shall be operated in a circuit separate from other electrical appliances. Otherwise, power protector may be tripped or fuse may be burned out.

INSTRUCTIONS

BEFORE FIRST USE

• Before any first wash make sure everything is installed correctly. Make sure to do one wash with no items inside to clean out the tube before your first loaded wash.After the above steps have been completed, In a few simple steps shown below you can select the type of wash you want and get started.
• As for the agglomerated or ropy detergent or additive, before they are poured the detergent box, it is suggested to use some water for dilution to prevent inlet of detergent box from being blocked and overflowing while filling water.
• Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.
• Make sure that the appliance is in a correct working temperature (0-40˚C). If the appliance is used under 0˚C the inlet valve and draining system may be damaged.
• Make sure that all labels are checked on items if they can be washed.
• Use non-foaming or less-foaming detergents which are more suitable for washing machines to wash correctly.
• Maximum mass of dry clothes for drying is 6.0 kg
  Maximum mass of dry clothes for washing is 9.0 kg****

Check the label| Take out the items out of the pockets| Knot the long strips,zip or button

Put small clothes into the pillow slip| Turn easy-pilling and long-pile fabric inside out| Separate clothes with different textures

WARNING

• Never use the washing machine to wash a single item at any given time, if you need to urgently wash an item, we suggest placing a few clothing items in there.
• Make sure that all labels are checked on items if they can be washed.
• Use non-foaming or less-foaming detergents which are more suitable for washing machines to wash correctly.

WASH CARE SYMBOLS
When choosing a wash program, check for any labels on your clothes and follow the instructions. below are some commonly used symbols.
DETERGENT DISPENSER
Only use low-subsiding detergents and clothing care preparations that are for use in a front load washing machine.

WASHING PROGRAMS TABLE

Program| Temperature(°C)| Rinse(times)| Revolution(rpm)| Time(min)
---|---|---|---|---
Dry| /| /| 1000(1400)| 2:35
Low-temp Drying| /| /| 1400| 2:45
Air Wash| /| /| /| 0:30
Duvet| 40°C (cold water,30°C)| 2| 800 (0,600,1000,1400)| 1:12
Down Jacket| 40°C (cold water,30°C)| 2| 800(0,600)| 1:08
Eliminate Mite| 60°C| 2| 800(0,600,1000)| 1:59
Cotton| 40°C
(cold water, 30°C,60°C,96°C)| 2| 800 (0,600,1000,1400)| 1:05
Quick 15′| cold (30°C, 40e° watr (30° C)| 1| 800(0,600)| 0:15
Wool| cold water (30°C, 40°C)| 2| 600(0,800)| 0:43
Rinse-FSpin| cold water| 1| 800 (0,600,1000,1400)| 0:16
Spin| cold water| /| 800 (0,600,1000,1400)| 0:10
Tub Clean| 60°C| 2| 800| 1:15

OPERATIONS

PROGRAMS
Select the desired programs according to the clothes that are being washed.

clothes.
Wool| For machine washable wool fabrics.
Rinse + Spin| Suitable for separate rinsing and dehydration of clothing
Spin| For spinning clothes only
Tub clean| For  simple cleaning of inner cylinder, please do not put clothes.
Delicate| Washing gauze, silk underclothes
Down Jacket| Suitable for machine washable down clothing.
Duvet| For the machine-washable mark, like bedding, bed sheets, curtains, etc.
Air Wash| For cleaning and deodorizing cotton, linen and chemical fiber clothes
low- temp. Drying| Suitable for low-temperature during of cotton, linen and chemical fiber clothes.
Dry| It can dry cotton, linen and synthetic clothes

CLEANING AND MAINTENANCE

WARNING:

• Before starting maintenance, ensure that the appliance is unplugged and close the tap.

CLEANING THE CABINET
Proper maintenance on the washing machine can extend its working life.
The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a wet cloth to wipe it off immediately. Make sure no sharp items are used to clean the appliance.

CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can eventually cause leaks. Remove any coins, buttons or other objects from the seal (if any) after each wash.

CLEANING THE INLET FILTER
Washing the filter in the tap

1. Close the tap
2. Remove the water supply hose from the tap
3. Clean the filter
4. Reconnect the water supply hose

Washing the filter in the washing machine

1. Screw off the inlet pipe from the back of appliance
2. Pull out the filter with long nose pliers and reinstall after being washed
3. Use the brush to clean the filter
4. Reconnect the inlet pipe and turn on the tap

CLEANING THE DETERGENT DISPENSER

1. Press down the arrow location on softener cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.

3. Restore the softener cover and push the drawer into position.
   

   Pull out the dispenser drawer with press the A| Clean the dispenser drawer under water| Clean inside the recess with an old toothbrush| Insert the dispenser drawer

Note: Do not use alcohol,solvents or chemical products to clean the machine.

CLEANING THE DRAIN PUMP FILTER

1. Be careful of the hot water.
2. Allow the detergent solution to cool down.
3. Drain pump filter can filter the yarns and small foreign matters from the washing.

4. Clean the filter periodically to ensure the washing machine operates normally.
   

   1.After the power is disconnected, open the filter cover.| 2.Turn the filter down as shown with the figure and
   take out sundries matters.| 3.Reinstall each part back after sundries matters are
   removed.

CAUTION

• Make sure that the valve cap and drain hose are reinstalled properly. Cap plates should be inserted aligning to hole plates otherwise water may leak.
• When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle and is empty. When replacing the cover ensure it is tightly secured.

FAQs

the door is closed, check if the clothes are stuck
Door can’t be opened| Washer’s safety protection is active| Disconnect the power and restart the appliance
Water Leakage| The connection between inlet pipe or outlet hose is not tight| check and fasten water pipes. Clean up outlet hose.
Detergent residues are in the dispenser| detergent might be dampened| Clean and wipe the detergent dispenser
Indicator or display isn’t working| Disconnect the power, PC board or harness may have a connection problem.| Check if the power is on and the power plug is connected correctly.
Abnormal Noise| | Check if the Transport bolts at the back of the appliance have been removed.
Check it’s installed on a level and solid floor

SPECIFICATIONS

CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>