Sharper Gentle Neck Shoulder and Back Massager User Manual

Sharper Gentle Neck Shoulder and Back Massager

CAUTION

All services for this product must be provided by our professionol stoff. If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department or similar full-time personnel.

PEOPLE WHO ARE NOT SUITABLE TO USE THIS PRODUCT

• Patients with malignant tumor.
• Patients with acute diseases such as heart disease. Pregnant women or women in menstrual period cycle.
• Children or those who have undergone surgery and are not fit
• The surface of this product can get hot; anyone who has sensitivity to heat should use this product with care.

PLEASE READ THE INSTRUCTIONS CAREFULL YBEFORE USE PLEASE READ THE INSTRUCTIONS CAREFULL YBEFORE USE

• If you have health concerns, please consult your doctor before using this product.
• Patients with heart disease should consult a doctor before use.
• DO NOT use this product on the same body part for more than 15 minutes.
• over use of this product can lead to over-heating. If this happens stop using the product until it cools down.
• DO NOT use this product directly on swollen, inflamed or rotten skin areas.
• This product Is a non-professional instrument and cannot be used as a substitute for drug therapy.
• Please do not use this product before bed; this product has stimulating effects that can delay falling asleep.
• Do not use this product while sleeping.

SCHEMATIC DIAGRAM & INSTRUCTIONS OF SIX KEY MODELS

POWER KEY
One press to power the machine on. The machine will automatically start in kneading massage mode. Press the power button once more to shut off the machine.

DIRECTION KEY
By default, forward and reverse rotations are automatically converted every 60 seconds. Press the direction key to turn on the forward function. Press the direction key again to turn on the reverse function.

FORCE ADJUSTMENT KEY
In the massage state, press the strength adjustment key to switch massage strength levels.

HEATING KEY
In the massage state, heating is on by default. Press this key to turn off heating, and then press this key to turn on heating.

VIBRATION KEY
Press the vibration key to enter the vibration mode. A total of three gear vibration speed adjustments are available.

INTELIGENT MULTI MODE FUNCTION KEY
In the power on state, press this key to switch different intelligent modes.

REPAIR AND MAINTENANCE

• For daily cleaning, please wipe with neutral detergent and soft cloth, and do not use corrosive detergent
• If the power cord is damaged, in order to avoid danger, It must be replaced by the full-time personnel of the manufacturer’s designated repair shop.
• When not using this product or cleaning, please pull out the power supply to avoid danger.
• DO NOT use any sharp objects to cut the surface of the product.
• DO NOT place the product in a humid environment, but in a dry and ventilated place.
• DO NOT apply force to the product.

SAFETY PRECAUTIONS AND WARNINGS

• Those with long hair need to roll up their hair to avoid any damage to the hair, head, and scalp.
• If the cloth cover of the massage head or the outer leather cover and mesh cloth are damaged it is strictly forbidden to use.
• Please do not use the portable power cord or manual control cord to suspend or swing the machine body; this could cause the wire core to be disconnected and cannot work normally.
• After use, please hold the plug and then pull it off. Do not pull the power cord directly to avoid accidents.
• Prevent water or other corrosive liquid from entering the machine; this can cause failure and damage the machine.

SIMPLE FAULT AND TREATMENT METHODS

• Please, check the following items when the machine fails or fails to start. if the product is still In a faulty state, please send it to the designated maintenance unit or authorized technician for inspection and maintenance.
• DO NOT try to remove or repair this product by yourself; otherwise it may cause personal injury, and our company will not bear any responsibillity.

COMMON FAULTS and PROCESSING METHOD

• The motor does not work at all:
  • Insert the adapter into the AC power outlet correctly and firmly.
  • TUrn on the power switch.
  • Firmly connect DC plug and DC socket.
• Massage and rolling are slow and weak
  • When the movement temperature decreases, it can be reused.
• It’s noisy
  • After using for 10 hours, the noise will be reduced naturally.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>